Power System PS-426 UV sterilizer box Instructions

: June 5, 2024
: POWER SYSTEM

Table of Contents

UV sterilizer box Instruction
Wireless indication LED light
UV disinfection LED light:
Battery indication LED light:
Feature:
FCC Caution
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Power System PS-426 UV sterilizer box

UV sterilizer box Instruction

No.

Weight(g)

---|---|---|---|---|---|---|---|---

☐

| PS-426| USB-C PD 18W| 5V 2.4A| 5200m Ah| 10W| L225W120H34mm| L170W90H22mm|

405g

Description: UVC sterilizer box with wireless charging 10W+Power bank.
Model: PS-426

Wireless indication LED light

Press and hold the button for 2S to start wireless charging, Green LED flashing 3times to enter into standby mode, then LED off.
Working status: Green LED solid on.
FOD: Red LED flash.
Over temperature: Red LED flash.
Press and hold the button for 2S to shut off.

UV disinfection LED light:

Quick click the button once to turn on the white LED and start disinfecting for 5 minutes.
Disinfecting time last for 5minutes, count-down 30S disinfection to stop.

Battery indication LED light:

Working status: The blue LED flash when charging and the blue LED solid on when fully charged. LED solid on from battery indication 1 to battery indication 3 in turn.
Discharging: LED turns off from indicator 3 to indicator 1 in turn.

Feature:

Kill escherichia coli, candida albicans, golden aureus and other bacterias effect up to 99%.
Extra USB-A port support charging for both Android and iOS Smart phones.
UV sterilizing box for Cellphones, Watches, Jewelry, Airpods, Glasses, Masks,etc.
USB-C input can allow wireless charging, USB-A Charging and UV box running simultaneously, total output max 18W.
Certificates: CE, RoHS, FCC.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.

*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.