SKY WING M102 Stereo Bluetooth Headset User Manual

SKY WING M102 Stereo Bluetooth Headset

Product Overview

**Packing list

**

A. Bluetooth Headset M102 x 1
B. Type-C charge cable x 1
C. User manual x 1

Basic Operation

M102 will enter paring mode automatically (will enter reconnect mode automatically if have paring record),the Boot prompt sound “Power ON”.
Power Off| In on status, toggle the switch to the OFF side to power off, the shutdown prompt sound “Power OFF”
Enter Pairing Mode|

1. After starting up, Red & Blue lights flicker alternately to enter the pairing mode.
2. Under unconnected standby mode to short press MFB 1.to enter the pairing mode.
3. Turn off the Bluetooth of the mobile phone manually, and the headset enters the pairing mode.

Play / Pause| Short press when play music.
Redial A Call| In connected standby/playing music mode, double press MFB to dial the last call.
Voice Dialing| In connected standby,long press MFB for 1 second then release.
Audio Switch| When during a call, long press for 2 second MFB then release.
Three-way calling function|

1. Call coming during call, short press the MFB to answer the new call and hang up the current call;
2. Call coming during the call, double press the MFB to answer the new call and keep the current call;
3. Call coming during the call, long press the MFB for 2 seconds to reject the new call.
4. When you are on a three-party call, double press the MFB to switch audio between the current call and the keep call.

Answer a call| When a call incoming, short press to answer.
Hang up a call| When during a call, short press to hang up.
| Reject a call| When a call incoming, long press for 1 second to reject a call.
Volume +| Volume Up| Short press.（the maximum with the prompt “Di”）
Next Song| Long press for 1 second.
Volume –| Volume Down| Short press.
Previous Song| Long press for 1 second.
Microphone Mute Button| Microphone Mute| When during a call, short press button to mute, press again to cancel.

luetooth Pairing and Connection

A. In off status, toggle the switch to the ON side to power on, with Red&Blue lights flicker alternately.
B. Search and click to connect ”M102” on your phone Bluetooth lists, LED change to Blue slow flash once after connected, now you can playmusic from phone to headphone.
C. You can press MFB / Volume+ / Volume- / Microphone Mute Buttononthe Bluetooth headset to control the answer/hang up a call and play/pause of the music, next and previous song, volume up and down, microphone mute.

1. Pairing: toggle the switch to On to enter pairing mode with LEDBlue& Red alternately flash.
2. Search and click to connect “ M102” on your phone Bluetoothlists.

Connection with Two devices

• The mobile phones connected to M102 are divided into two sets:
  Machine A and Machine B.

• Connect machine A first, and toggle the switch to On to enter pairing mode, torn on the Bluetooth of machine A and searchfor the device, search for “M102”and then click to connect. After the connection is successful, turn off the Bluetoothof machine A and M102 enters pairing mode again.

• Then use machine B to connect with M102, according to themethod of machine A. After the pairing is successful, turnonthe Bluetooth of machine A and click M102 to connect. (Some mobile phones may have the automatic connection function).
  

• Music only can be played from one phone under two connections, when you want to play music from another phone, you needtopause or close the music of the previous phone. The same operationduring talking status.

LED Indicator

Bluetooth function state light, which is a normal phenomenon)
Full charged| Red LED turn off
Low battery| Red LED flash

Charging

Please charge the M102 at once when the Red LED flash. Chargingtime is about 2 hours. Solid Red LED turn off when full charged. Charge Connections

Please connect to the M102 charging port through the Type-Cendof Type-C charging cable.

Type-C charging cable / Charging with charger / Charging with PC

*Note：
Please charge the M102 at least one time every 2 months when don’t use it

TTS Tone

Product Specification

*The above data are all from SKY WING laboratory, and the actual use time, environment and music will be different.

Attentions and Q & A

A. How to reconnect and operation when failed to reconnect？

When M102 connected with your mobile phone successfully at the first time, it will search and reconnect the paired device automatically when power on, If failed, please pair and connect again. M102 can be reconnect in10  minutes, will be power off if over 10 minutes. It will have a tone “Your headset is connect” after over operation range disconnect.

B. How to delete paired records？

long press the MFB and Volume – Button for 5 seconds to clear the pairing record. After deleting, the M102 will not connect devices automatically.

C. What’s the password for pairing?

Some connection devices require password for pairing, please try 0000 or 8888 or 1111 or 1234.

D. What devices could charge for the headphone？

Any car charger, power bank, PC etc. which meet DC 5V, charging current
more than 1A could be charge for M102.

E. How to do if have connect issue or dead？

Please try charging reset, operation: press and hold the MFB, plug in chargingcable to charging, this will reset the headset to power off, it can be usednormally after power on.If you still cannot use it normally, you can ask customer service or manufacturer for technical support.

F. Power off automatically？

M102 will power off if does not connect any devices for over 5 minutes, or battery voltage is less than 3.1V.

G. Three-way calling function operation？

1. Call coming during call, short press the MFB to answer the newcall andhang up the current call;
2. Call coming during the call, double press the MFB to answer the newcall and keep the current call;
3. Call coming during the call, long press the MFB for 2 seconds to reject thenew call.
4. When you are on a three-party call, double press the MFB to switch audiobetween the current call and the keep call.

H. Wired mode

The headset is plugged into a USB cable that can transmit data, and the other end of the USB cable plugs into the USB port of the computer or TV.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If  this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>