magic play Zombie War Water Shooting Game Instructions
- June 6, 2024
- magic Play
Table of Contents
zomby
Instructions
Detail
NAME | Zomby、 |
---|---|
Material | Metal/wooden cabinet/Acrylic/IC mainboard |
Product | AMUSEMENT MACHINES |
Power | 200W |
size | Size:12094165cm; screen inch: 32”;ball shooting 2P, |
power:200W,weight:100KGS
PLAYERS| 2P
GAMES| 6 IN 1
WIN| Capsule toys or tickets
FOR| DINO ADVENTURE CAN PUT FOR GAME CENTER, FAMILY FUN CENTER, SOFT PLAY
AREA, ETC.
Playing instruction
DINO ADVENTURE, with 6 games in 1 ball shooting new software machine, With IC
high-quality board to mix all players popular games inside. When insert token,
players can select 15 big kinds of games to start, Players shoot the monsters
within the limited time to pass next level to win more scores, to win tickets
or capsules after game over.
Game Props
Item | Remarks |
---|---|
LOVE | Recover life |
BOMB | Real bomb reduce energy, fake bomb won’t |
ICE | beat monster will get ice |
MISSILE | Launch missile will make harm partly |
FLASH | Flash will harm the target |
Common faults and Solutions
• Failure phenomenon | • Analysis | • processing method |
---|---|---|
• The whole machineis not working | • Power failure |
• Damage of switch power box
• 3、fuse damage| • 1、Check the power supply voltage fault AC
• 2、+12 DC output, if there is no switch power box
• 3、Replacement of fuse
• voice| • setting voice not open Speaker faults
• Speakers cable loose| • 1、enter into setting to open on voice.
• 2、Check and change new speaker
• 3、Check the speaker and mainboard cable
signal
• No gift dispenser| • Turn on ticket or capsule toys during the setting
• l Add ticket or capsule toys into the hooper| • 1.Turn on ticket or capsule
toys during the
setting
• 2. Add ticket or capsule toys into the hooper
• Not accept token| • Coin acceptor problem
• Coin acceptor inside not set with right token| • check or replace new coin
accpetor
• Check inside with reset right token way or
contact coin acceptor for help
• Not with ball shooting out| • No balls inside the gun
• Stuck and balls broken inside the pipe tube
• 3、insdie the gun there are two wheels broken| • 1、add enough balls
• 2、Check and open pipe tube to take away all broken balls
• 3、replace new wheels
• no score| • Not adjust the gun
• Mainboard problem| • into setting to adjust the gun
• Change new mainbaord .
四. methods for troubleshooting
ERROR OF NO GIFT
-
CHECK THE HOOEPR OF CAPSULE TOYS ,SENSOR OR MOTOR.
-
IF TICKET DISPENSER ,CHECK OR CHANGE NEW ONE
NO ball out
Check whether the gun base cable is loose, or whether there is something on the ball.
The ball can’t pop up normally
Not with ball shooting out, the gun inside there are two wheels
Two wheels must run, if one broken ,also need to change.
GAME SETTINGS
-
Param settings
Settings sheetname| remarks
---|---
coins| 1~5000
Playing coins/credit| 0(free)~100
Bonus marks| 1~9999
Gift number| 0(no gift)~1000
Gift overlay| Once,no
Music volume| 0,1,2,3,4,5,6,7,8,9,10
Game level| 1,2,3,4,5,6,7,8,9,10
Wait play time| 1~120
Demo music| OPEN/ CLOSE
Game Type| HP/ TIME
Game time| 1~30minites -
ACCOUNTS
password:888888
name| remarks
---|---
current| Clear current tokens
Change new password| Change current password -
HARDWARE TEST
-
- Calibrate
Writing diagram sheet
- Calibrate
port| No.| remarks| Use for I PS|
---|---|---|---|---
J6| 1| 5V| POWER SUPPLY
2| 12V
3| 24V
J4| 1| GND| GND| CONNECT MAINBAORD
2| 5V| 5V
3| LED| LED SIGNAL
4| RX| INPUT
5| TX| OUTPUT
6| SGND| VOLUMN GND
7| R| R
8| L| L
port| No.| remarks| Use for| PS
---|---|---|---|---
J5| 1| speaker+| speaker+|
2| speaker-| speaker-
3| potentiometer| potentiometer
4| GND| GND
5| potentiometer| potentiometer
6| SW1| 上
7| SW2| 下
8| SW3| 2p sensor signal
9| SW4|
10| SW5| enter
11| MB1|
12| GND|
13| MB2|
14| 12V|
15| C+1| 1P coin acceptor
16| 12V| 12V
17| T8G1|
18| 12V|
19| C+2| 2P coin acceptor
20| 12V|
21| T8G2| 2pSSR
22| 24V|
23| TZ| SSR
24| C-| 1p sensor signal
25| 5V| 5V
26| GND| GND
port| No.| remarks| Use for| PS
---|---|---|---|---
J2| 1| IN9| shooting button| No.2 writing diagram
2| GND| GND
3| IN10| –
4| GND| GND
5| IN11| –
6| GND|
7| IN12|
8| GND| GND
9| IN13| –
10| IN14| –
11| IN15| –
12| IN16| –
13| OUTS| gun light-
14| 12V| Gun light +12V
15| OUT4| Lift up ball Motor-
16| 24/12| Lift up ball Motor
+12V
17| AD3| Potentiometer up
down
18| 3V3| 3.3V
19| AD4| Potentiometer left
right
20| GND| GND
port| No.| remarks| Use for| PS
J1| 1| IN1| shooting button| No.1 writing
diagram
2| GND| GND
3| IN2| –
4| GND| GND
5| IN3|
6| GND| GND
7| IN4|
8| GND| GND
9| INS|
10| IN6|
11| IN7| –
12| IN8| –
13| OUT1| gun light-
14| 12V| Gun light +12V
15| OUT2| Lift up ball Motor-
16| 24112| Lift up ball Motor
+12V
17| AD1| Potentiometer up down
18| 3V3| 3.3V
19| AD2| Potentiometer left right
20| GND| GND
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>