Sky Wing KH99M-L Nosie Cancelling Headset User Manual
- June 4, 2024
- SKY WING
Table of Contents
Noise Cancelling Headset
User Manual
MODEL: KH99M-L
Package
- Headset x l
- USB Charging Cable x l
- User Manual x 1
Diagram
- Adjustable Headband
- Multi-Function Button (MFB)
- Microphone
- LED Indicator
- Type-C Charging
- Mute Button
- Volume –
- Volume +
Specification
Supported Profile – HSP/HFP/AVRCP/A2DP
Talk Time – About 16 hours (70% Volume)
Charging Time – About 1.5 hours
Effective distance – >10m
Standby Time – About 100 hours
Music Time – About 26 hours (70% Volume)
Battery Capacity – 180mAh
Function Button
Power ON/OFF
How to Pair
Turn on the Bluetooth of your phone, and select the model “KH99M-L” to
connect.
How to clear pairing
Answer/Hang Up/Reject/Mute/Call Back/Voice Assistant
Mute
Call Back
When the “KH99M-L ” is connected to a cell phone, you can double-click the MFB
to dial back the last number.
Voice Assistant
Three-Party Calling
- You have an incoming call when you’re on a call, click the multi-function button to accept the incoming call and end the current call .
- You have an incoming call when you’re on a call, double click the multi-function button to accept the incoming call and hold the current call.
- You have a new incoming call when you’re on a call, long press and hold the multi-function button for 2 seconds to hold the current call and end the incoming call.
- When you’re in the three-party conference, click the multi-function button to hang up the current call and resume a hung call.
- When you’re in the three-party conference, double-click the multi-function button to switch the call between the current call and the incoming call.
Play/Pause/Volume Control/Music Control
Connection With Two Devices
- Pair with your first device.
- Turn off the Bluetooth of the first device.
- Hold on to the MFB for 5s to enter into pairing mode (The red and blue lights flash alternately) and pair with your second device. After the connection is successful, the light goes out.
- Turn on the Bluetooth of the first device, and manually connect “KH99ML” in the paired list . After the connection is successful, your headset is connected to the two Bluetooth devices at the same time (If the first device is the 10S, then you need to manually connect. If it is Android, it can be automatically connected.).
Electricity
When the power is less than 10%, the Low Battery is reported every 3 minutes.
Charging
Output: DC 5V
Warning
- Do not listen for a long time at a high volume to prevent injury to hearing.
- Do not wear headphones while driving, cycling, or walking, otherwise, it will easily cause traffic accidents.
- The headset can only be charged with a 5V charger. Charging with a charger that exceeds 5V may cause overheating or fire.
- Please fully charge before long—term placement, and ensure that it is charged every 3 months.
CORRECT DISPOSAL OF THIS PRODUCT
( Waste Electrical& Electronic Equipment )
This Marking shown on the product or its literature indicates that it should
not be disposed of with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of waste and recycle it
responsibly to promote the sustainable reuse of material resources. Household
user should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take this
item for environmentally safe recycling. Business users should contact their
suppliers and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal.
FCC Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ENBRIDGE ADVISORY GMBH
Virginia Str.2 3
5510 Butzbach, Germany
eubridge@outlook.com
|
MET INT’L BUSINESS LTD
9 Pantvgraigwen Road, Pontypridd,
Mid Glamorgan, CF37 2RR, UK
tanmetbiz@outlook.com
---|---
Manufacturer: Sky Wing Communication Electronics Co., Ltd.
Manufacturer’s Address: No. 62, 10th Road, Longyan Zone, Humen Town
Dongguan, Guangdong Province, China
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC
ID: WSG-KH99M-L
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>