SKY WING Communication Electronics Co Ltd K11 Bluetooth Headset User Manual
- June 10, 2024
- SKY WING Communication Electronics Co Ltd
Table of Contents
SKY WING Communication Electronics Co Ltd K11 Bluetooth Headset
Product Overview
Packing list
- A. Bluetooth Headset K11 x 1
- B. Type-C charge cable x 1
- C. User manual x 1
Basic Operation
Bluetooth Pairing and Connection
- In off status, toggle the switch to ”ON” to power on, with LED Blue & Red flash alternately.
- Search and click to connect ”K11” on your phone Bluetooth lists, the phone shows connected, now you can play music from phone to headphone.
- You can press MFB / Volume+ / Volume- / Microphone Mute Button on the Bluetooth headset to control the answer/hang up a call and play/pause of the music, next and previous song, volume up and down, microphone mute and so on.
LED Indicator
| Mode | LED Indicator |
|---|---|
| Power on | Blue LED flash 2 times |
| Power off | Red LED flash 2 times |
| Pairing mode | Red & Blue LED flash alternately |
| Connected standby mode | Blue LED flash once every 10 seconds |
| Playing Music | Blue LED flash once every 10 seconds |
| Talking | Blue LED flash once every 10 seconds |
| Delete pairing record | Blue and Red LED is on for 1 second at the same time |
| Charging | Solid Red LED |
| Full charged | Solid Blue LED |
| Low battery | Red LED flash |
Charging
- Please charge the K11 at once when the Red LED flashes.
- Charging time is about 2 hours. Solid Blue LED when full charged.
Charge Connections
- Please connect to the K11 charging port through the Type-C end of Type-C charging cable, USB end to the charger(can be used as car charger, travel charger, computer USB, etc.).
Note: Please charge the K11 at least one time every 2 months when don’t use it.
Product Specification
| Bluetooth Version | Bluetooth V5.4 |
|---|---|
| Bluetooth Chipset | BT8925B2 |
| Operation Range | 10 meters |
| Bluetooth Protocols | HSP, HFP, AVRCP, A2DP |
| CODEC Code | SBC AAC |
| Battery Capacity | 300mAh/3.7V |
| Charging Time | About 2 hours |
| Music Time | About 45 hours(70% Volume) |
| Talking Time | About 35 hours(70% Volume) |
| Stand-by Time | About 300 hours |
| Headset Net Weight | About 101.6g |
| Headset Dimension | 17816868mm |
The above data are all from SKY WING laboratory, and the actual use time, environment and music will be different.
Attentions and Q & A
How to reconnect and operation when failed to reconnect?
- When K11 connected with your mobile phone successfully at the first time, it will search and reconnect the paired device automatically when power on, If failed, you need to pair K11 again.
How to delete paired records?
- In state-on mode(no talking), long press the MFB and Volume – Button for 5 seconds to clear the pairing record.
- The indicator Blue and Red LED is on for 1 second at the same time that means the pairing record has been cleared, and K11 will not connect the connected device. When there are various connection problem, try clearing the pairing record firstly.
What’s the password for pairing?
- Some connection devices require password for pairing, please try 0000 or 8888 or 1111 or 1234.
What devices could charge for the headphone?
- Any car charger, power bank, PC etc which meet DC 3.7V, charging current more than 300mA could be charge for K11.
FCC STATEMENT
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>