Guangzhou Lightsource Electronics S01A-TYAZ Smart Door Lock

Special Attention

1. Please keep any mechanical keys outdoors. in case of any emergencies requiring their use.
2. Please promptly replace batteries after receiving low battery notifications.
3. Please carefully read this manual before installation, and keep it for future reference.

Introduction

Lock structure

Packing List

Check the following drawing to check whether the package contains all the parts

Specifications

Suitable for Models| ****

S01A-TYAZ

| Doors Applicable| Aluminum door Wooden door
---|---|---|---

Materials

| Handle：SS304 Panel：SS304| Working Voltage| ****

6V/4x AAA Batteries

Lock Weight

| ****

3 KG

| Door Thickness to Fit| ****

35-65mm

Unlocking Way

| Password Card

Mechanical key Gateway(option)

| ****

Data Capacity

| Password：10 temporary password

Card：380

Color

| Silver Black| Working Temperature| -10℃-55℃
Low Wattage Alarm| ****

Less than 4.8V

| ****

Working Humidity

| ****

0-95%

Networking mode

1. Touch to wake the screen
2. Long press the network configuration key for 5 seconds to enter the network configuration mode

Installation

Turn the handle

Notice: Adjust the handle according to the direction you open the door.

Installation Diagram

Step 1 Install Mortise

Step 2 Install Square Shaft

Step 3 Install Sliding Screw Casing

Step 4 Connect Front and Back Panels Wires

Step 5 Install Back Panel

Step 6 Install the Battery

Operation

Registration

After entering the APP, click “Register” at the bottom to create an account. After the authentication of the account and the setting of the password, the account is registered, and then you can log in to the system.(You can register with your email or mobile number)

Account login

After the account is successfully registered, you can enter your account to log in

Create sites and zones

After registering an account for the first time, you need to create a site first, and you can also create an area, so that you have a site with many areas, which is convenient for the classification and management of devices later.

Join the site
In addition to creating your own site, you can also join other people’s sites. After creating the site with other accounts, you can invite site members to join. After the invitation is confirmed, the site and smart devices can be shared

Device

Add Device

Select the corresponding equipment category for distribution network installation, which can be manually selected or automatically scanned. After the device is added, you can access the panel to use the corresponding functions. It can also be displayed and operated in workbench widgets.

Add Gateway

1. Tap Add Device on the Home page or + in the upper right corner of the page to go to the Add Device page.
2. Click the Gateway， Choose to add your Zigbee gateway type， Added successfully

Add lock

1. After the gateway is added successfully, enter the gateway page, click on “Add subdevice”,then select more device type. find the door lock option
2. Door Lock： Touch to wake the screen， Long press the network configuration key for 5 seconds, Door lock reminder： “ Under connecting, pls wait” to enter the network configuration mode
3. Door lock reminder： “Network join Succeed” Added successfully

Setting

Remote Open

Need to open the remote unlock setting in the settings,You can directly press and hold the unlock  button to unlock

Free Verify

When started, the door lock will be in normally open mode

UnLock Ways

Manage Password
Used for security verification on the door lock device side and cannot be unlocked

Emergency Password
If all other passwords have been forgotten, use this password to unlock the lock in an emergency

Add temporary password

Dashboard

Edit widget

After entering the APP, you directly come to the workbench, where you can add and assemble the small components you need to build a custom application scenario. But before the widgets can play a role, you need to add the corresponding type of equipment. After the widget is successfully added, the specific devices and functions of the widget can be displayed in the workbench.

Access

APP access (passenger)

Add passers to this module, select the corresponding time range and pass equipment, and you can log in to the app to use the pass function.

Password

Add a password, including a one-time password and a periodic password, for the user to use the password space in the corresponding time range

Customer Name:
Customer Calls ：
Purchase Date ：
Product Name ：
Product Model ：

Note:

1. Please keep this card so that you can use it when you need warranty service.
2. We provide you with a one-year warranty from the date of purchase.
3. This warranty service is valid for customers in any country in the world.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be u sed in portable exposure condition without restriction

FCC ID: 2AY4QS01A-TYAZ

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>