SKY WING M7 Mono Bluetooth Headset User Manual

SKY WING M7 Mono Bluetooth Headset

Product Overview

Packing list:

• M7 Bluetooth headset, 1 set
• Charging dock, 1 piece
• Type-C charging cable, 1 piece
• 1 USB dongle (Plug the dongle into the PC and then connect it with the headset to realize the compatibility and call of the third-party voice software on the PC)
• User’s Manual

Bluetooth Pairing and Connection

• Press and hold the M7 multifunctional button for 3 seconds to enter the pairing mode, and the indicator will flash in red and blue alternately.

• Enable the Bluetooth on the mobile phone, and click search. When “M7” appears, click the pairing connection. After the connection is successful, the LED indicator will turn to blue and flash slowly, and “M7” connected will be displayed on the mobile phone.

• With the USB dongle, connect the headset to the PC. (Note: Plug the dongle into the PC and then connect it with the headset to realize the compatibility and call of the third-party voice software on the PC)

  • Insert the USB dongle into the USB port on your PC, which will be automatically turned on.
    ( Note: After it is plugged into the PC and successfully turned on, the USB Dongle will be displayed on the audio software of the PC)

  • After it is turned on, the indicator on the USB dongle will flash quickly in blue to indicate that it is now in pairing mode. (Turn the headset into the pairing mode and keep it as close as possible to the USB dongle (within 20 cm), so it will be connected with the dongle automatically.
    Note: It will take about 20 seconds to connect the headset for the first time. If the headset and the USB dongle cannot be connected, please unplug the USB dongle and then plug it into the PC. And restart the headset to enable the pairing mode and try to reconnect them.

  • After the headset is successfully connected, the indicator of the USB dongle will be always on in blue.
    Note: When the USB dongle is not in use, please turn off the headset before unplugging the dongle from the PC.

Basic Features

for 3 seconds to power it on, and it will be in the pairing mode by default; you will hear the prompt voice of “Powered on”.
Power-off| When the headset is on, press and hold the multifunctional button for 3 seconds and  then it will be powered off; you will hear the prompt voice of “Powered off”.
Start pairing| After the headset is powered on, the indicator will flash in red and blue alternately to indicate that  it is in the pairing mode, and there will be prompt voice of “Pairing”
Play/Pause| When playing music, click the “Multifunctional button” to play/pause the music
Redial last number| When connected to the mobile phone, double-click the “Multifunctional button” to redial the last number  and  make  a  phone  call on  the   mobile
 |  | phone.
---|---|---
Voice assistant| When it is connected, press and hold the “Multifunctional button” for 2 seconds and then release it; the voice assistant will be enabled after the “beep” sound is heard.
Audio switch| During a call session, press and hold the “Multifunctional button” for 2 seconds to switch the audio play between the mobile phone and the headset. When the audio is switched successfully, there will be a beep sound.
Answer a call| When there is an incoming call, click the “Multifunctional button” to answer the call.
Hang up| During a call, click the “Multifunctional button” to hang up the current call.
Reject a call| When a call comes in, press and hold the “Multifunctional button” for 2 seconds  and then the call is rejected after the “ding-dong” sound is heard.
Volume + button| Increase the volume| Click the “Volume +” button (There is a “du” sound when the maximum volume is reached).
Next| Press and hold the “Volume +” button for 1 second when playing music to switch to the next music.
Volume – button| Decrease the volume| When playing music/answering a call, click the Volume – button to lower the volume.
Previous| Press and hold the “Volume -” button for 1 second when playing music to switch to the previous music.
Mute button| Mute the microphone| During a call, click the “mute button” to mute the microphone, and click it again to unmute the microphone.

One-to-two mode

M7 is connected to mobile phone A and mobile phone B;
First, connect it to mobile phone A; press and hold the Multifunctional button on M7 for 3 seconds to turn it on; it will be automatically in the pairing mode by default. The indicator will flash alternately in red and blue. Enable the Bluetooth function on the mobile phone A and search for the headset. After “M7” is found, click it to connect. After the headset is successfully connected, disable the Bluetooth function on mobile phone A. M7 will be in the pairing mode again.

Mobile phone B can be paired and connected with M7 in the same way as mobile phone A. After they are paired successfully, open the Bluetooth function on the mobile phone A and tap on M7 to connect it.

*When connected in one-to-two mode, M7 can only play the music from one mobile phone. To play the music from the other mobile phone, you need to pause or turn off the music of the current mobile phone, which is the same for calls.

Charging

The red indicator flashes when the battery power of M7 is low, please charge it immediately. After about 2 hours of charging, the indicator will turn red when the headset is being charged, and blue when it is fully charged.

Charging: Connect the Type_C charging cable to the charging dock or the M7 headset to charge it 
Note: Remember to use 5V1A charger (When M7 is not in use, please charge it at least once every 2 months)

TTS Voice Prompt

• Power on
• Pairing
• Paired
• Your headset is connected
• Your headset is disconnected
• Power off
• mute on
• mute off

Product specifications

• V5.0
• QCC3020
• 10 米
• HSP,HFP,AVRCP,A2DP
• SBC,AAC
• 400mAh/3.7V
• 约 2 小时
• 72g
• 39.61149.95163.82mm
• 123.5g
• 607971.48mm

QCC3020

Communication distance| ****

10 m

Bluetooth protocol| ****

HSP,HFP,AVRCP,A2DP

---|---
Decoding method| ****

SBC,AAC

Built-in battery| ****

400mAh/3.7V

Charging time| ****

App. 2 hours

Net weight| ****

72g

Size| ****

39.61149.95163.82mm

Net weight of charging dock| ****

123.5g

Size of charging dock| 607971.48mm

Precautions and Q & A

How to connect back the headset?
What if they can’t be connected back?
What if it is disconnected due to long distance?

After M7 and your mobile phone are successfully connected, it will be automatically connected to your mobile phone every time it is powered on. If it can’t be connected back, please try to pair and connect them again.

B. How to clear the pairing record?
In the pairing mode, press and hold the Multifunctional button/volume – button for 5 seconds simultaneously to clear the pairing record. When the indicator is on in purple for 1 second, the pairing records are successfully cleared. After that, the M7 will no longer be connected back to the previously connected devices by default. In case of any faults in pairing, you can try to clear the pairing records.

C. What is the pairing password?
If a prompt for password input pops up when some devices are connected to M7, you can try to enter 0000 (four zeros), 8888 (four eights), 1111 (four ones), or 1234..

D. Which devices can M7 be charged with?
Please charge it with 5V1A charger.

E. How to realize three-way call?

• When a call comes in during a call, click the Multifunctional button to answer the new call and hang up the current call;
• When a call comes in during a call, double-click the Multifunctional button to answer the new call and hold on the current call;
• When a call comes in during a call, press and hold the Multifunctional button for 2 seconds to hold on the current call and reject the new call;
• During a three-way call, double-click the Multifunctional button to switch between the current call and the held call.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>