SVLVANIA SRCD2732BT BLUETOOTH CD FM PLL RADIO MICRO SYSTEM User Manual
- June 5, 2024
- SVLVANIA
Table of Contents
BLUETOOTH CD FM PLL RADIO MICRO SYSTEM
User Manual
MODEL NO : SRCD2732BT-BLACK
INSTRUCTION MANUAL
Please read these instructions thoroughly before use and retain them for
future reference
SYLVANIA is a registered trademark of OSRAM Sylvania Inc. used under license.
SAFETY WARNINGS
Follow the instructions below to ensure the product is used safety and correctly.
- Do not disassemble the product.
- To reduce the risk of electric shock, do not remove screws. The unit does not contain any user-serviceable parts. Please leave all maintenance work to qualified personnel.
- Avoid extreme degrees of temperature, either hot or cold. Place the unit well away from heat sources such as radiators or gas/electric fires.
- To prevent the risk of electric shock or fire hazard due to overheating, ensure that curtains and other materials do not obstruct the ventilation vents.
- Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated.
- Never place any type of candle or naked flame on the top of or near the unit.
- To reduce the risk of fire, electric shock or product damage, do not expose this unit to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, should be placed on the unit.
- Do not use the product if you see any battery liquid leakage.
- The battery (not included) used in this device may present a risk of fire or chemical burn if mistreated.
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cm between the radiator & your body.
IMPORTANT SAFETY INSTRUCTION
****|
CAUTION
THE RISK OF ELECTRIC SHOCK DOES NOT OPEN
| ****
---|---|---
WARNING : SHOCK HAZARD. DO NOT OPEN AVIS : RISQUE DE CHOC ELECTRIQUE NE PAS
OUVRIR
LASER SAFETY : This unit employs a laser. Only qualified service
personnel should attempt to service this device due to possible eye injury.
CAUTION: USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE, PROCEDURES HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
The CAUTION marking is located on the unit.
| The lightning flash with the arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the unit’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
---|---
| The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the manual accompanying the unit.
| DANGER: Invisible and hazardous laser radiation when open and interlock
failed or defeated. Avoid direct exposure to the beam.
| This symbol means that this unit is double insulated. An earth connection is
not required.
Class 1 Laser Product| This compact disc player is classified as a CLASS
1 LASER PRODUCT. The CLASS I LASER PRODUCT label is located on the bottom
exterior.
This unit is designed to operate on an AC 100-240VN 50/60Hz supply only. Connecting it to other power sources may damage it. Ensure that the supply corresponds to the information on the rating label on the unit.
Getting Started
- Remove the product from the box.
- Remove any packaging from the product.
- Please retain all packaging after you have checked and counted all the parts and the contents against the list.
Package Contents
- Unit
- Speaker box x 2
- Remote control
- Instruction manual
- AC/DC adapter
Description Of parts:
Connecting the Speakers to the Unit
Plug the speaker wires into the unit’s rear panel “SPEAKER” terminals. The Left and the right speakers should be inserted into the “SPEAKER” terminal L and R respectively. Ensure that the speaker wires’ polarity is correctly inserted.
Using the Remote Control
A CR2025 battery is already installed in the remote control unit. Before using it, pull out the battery insulation sheet as shown below.
Replacing the Remote Control Battery
Remove the remote control battery case as shown in the figure below.
Replace the battery with a new CR2025 size battery. When inserting the battery, be sure to do so in the proper direction as shown below.
Install back the battery case.
Connecting to the Power Supply
Plug the AC/DC adapter into the AC wall socket.
Basic Operation
Press the STANDBY button to turn on the unit. To turn off the unit, press the
STANDBY button again.
CD / FM / BT / AUX IN
Press the SOURCE button to select from the different modes.
Volume Control
Turn the VOLUME control or press the VOL- / VOL+ buttons on the remote control
to change the volume.
Adjusting the Antenna
The wire antenna at the rear panel of the unit should be extended to ensure a
good FM reception. Alter the wire antenna position for the best reception.
FM Radio Operation
Auto Scan
- Turn on the unit in FM mode.
- Press and hold the SCAN button to start auto-scanning the available stations.
Manual Scan
- Press the TUNE- or TUNE+ button repeatedly to tune to a different frequency.
- Alternatively, press and hold the TUNE- or TUNE+ button to automatically search to the next available station.
Storing FM Presets
You can save up to 20 FM stations.
- Tune to the station you wish to store.
- Press and hold the PROG/MEMORY button to access the menu control. Flashing “P01” is displayed
- Press the TUNE- or TUNE+ button on the unit to a preset the number that you want to store. Then press and hold the PROG/MEMORY button to save.
Recall FM Presets
Press the PROG/MEMORY button once to recall the preset channel, press it
repeatedly to change to the next preset channel.
CD Operation
Loading and Playing CD Disc
Open the CD door. Install a disc with the CD graphic-side facing up. Close the
CD door.
After reading the disc the total number of tracks will be shown on the
display. It will play the first track automatically.
Play/Pause Control
To pause playback press the PLAY/PAUSE button once. Press the PLAY/PAUSE
button again to resume playback.
Stop Control
To stop playback press the STOP button.
Skip Track
During playback press the PREVIOUS or NEXT button to skip to the next or
previous tracks.
Random Play
While you are playing CD, press the MODE button to play music in random order.
The display will show “RANDOM”. Press the MODE button again to resume normal
playback.
High-Speed Music Search
During CD playback press & hold the PREVIOUS or NEXT button to start high-
speed skipping. When you release the PREVIOUS or NEXT button normal speed
playback will resume.
Repeat Playing
During playback press the MODE button once the display shows a flashing
“REPEAT”.
The current track will be played repeatedly. Press the MODE button again the
display shows a steady “REPEAT ALL”. All tracks will be played repeatedly.
Press the MODE button again to resume normal playback.
Bluetooth Audio
Please follow the pairing instructions below to link the unit to your
Bluetooth device.
- Press the SOURCE button repeatedly to enter the Bluetooth mode. The display will show “bt” and start searching.
- If the unit has never been paired with a Bluetooth device before or cannot find the last
- paired device, the display, and the Bluetooth status indicator will keep on flashing.
- Turn on the Bluetooth function of your device and enable the search until “Sylvania SRCD2732BT” is found. Select “Sylvania SRCD2732BT” on the Bluetooth device to make the connection. Enter the passcode “0000” if required.
- After successfully paired the unit will display “bt”.
- You can now start playing music from your smartphone wirelessly to the speaker.
- You can press the PLAY/PAUSE button to pause or resume the playback.
- You can press the PREVIOUS or NEXT button to skip to the next song or go back to the previous song.
AUX In
This allows you to connect an external player’s sound through your unit.
-
Plug a 3.5mm audio cable (not included) into your external player’s line out and the other end into the AUX IN jack at the front of the unit.
2. Press the SOURCE button to enter AUX mode. The display shows “AUX” -
Start your external player to play music.
-
The unit will output the sound.
EQ Operation
You can enjoy different EQ sound effect modes. Press the EQ button will change to different sound effects: FLAT / POPS / CLASSIC / JAZZ / ROCK
Sleep Function
- When the unit is switched on, press the SLEEP button repeatedly to select a sleep duration from either 120, 90, 60, 45, 30, 15 minutes or sleep off. The sleep icon willshow on the display.
- When the sleep timer is zero, the unit will turn off automatically.
- To cancel the sleep function, press the STANDBY button to turn off the unit. Or press the SLEEP button repeatedly to select “sleep off”.
Clock Setup
- Turn off the unit in Standby mode.
- Press and hold the TIME SET button to access the setup menu.
- Press the TUNE- or TUNE+ button to adjust the hour. Press the TIME SET button to confirm and it will go to the next menu.
- Press the TUNE- or TUNE+ button to adjust the minute. Press the TIME SET button
to save and finish the set up.
Note:
• The time set may automatically be overridden by the FM station real time
information.
• When the unit is turned on in any mode of operation, pressing the TIME SET
button will display the time on the display for a few seconds.
Maintenance
Handling CD
Treat the disc carefully and handle it only by its edges. Avoid touching the
shiny, unprinted side of the disc with your fingers. Do not expose discs to
direct sunlight, high humidity, igh temperatures, dust, etc. Do not stick or
write anything on either side of the disc. Sharp writing instruments or ink
may damage the surface.
Cleaning CD
If the CD skips does not play it may need cleaning. Wipe the disc in straight
lines from the center of the disc to the outer edge of the disc with a soft
lint-free dry cloth. Never use detergents or abrasive cleaners.
Cleaning CD Lens
If the CD lens is dirty the player may skip or may not play a CD. Clean it
with a blower/brush to remove the dust. To remove fingerprints use a dry
cotton swab and wipe from the middle towards the outer edge of the lens.
Cleaning the Unit
To prevent fire or electric shock hazard disconnect your unit from the AC
power source when cleaning. Wipe off any dust and stains with a soft cloth
moistened with a mild soap and water solution. Do not use benzene, thinner or
similar chemicals to clean the casing.
TECHNICAL SPECIFICATIONS
AC/DC Adapter : 100-240V 50/60Hz
Power Consumption: 20W
FM Frequency Range: 87.5 -108MHz
Bluetooth Version: 5.0
Aux In 3.5mm stereo: jack
Headphone Out: 3.5mm stereo jack
Speaker Output Power : 2x3W R
MS Remote Control Battery: CR2025
Note: Due to continuing improvements, technical specifications are
subject to change without notice.
To make a warranty claim, do not return this product to the store. Please
email support@curtiscs.com or call
1-800-968-9853.
90 day Warranty
This product is warranted to be free from defects in material and
workmanship for a period of ninety (90) days from the date of original
purchase. During this period, your exclusive remedy is repair or replacement
of this product or component found to be defective, at our option; however,
you are responsible for all costs associated with returning
the product to us. If the product or component is no longer available, we will
replace with a similar one of equal or greater value. Prior to a replacement
being sent, the product must be rendered inoperable or returned to us.
This warranty does not cover glass, filters, wear from normal use, use not in
conformity with the printed directions., or damage to the product resulting
from accident, alteration, abuse, or misuse. This warranty extends only to the
original consumer purchaser or gift recipient. Keep the original sales
receipt, as proof of purchase is required to make a warranty claim. This
warranty is void if the product is used for other than single-family household
use or subjected to any voltage and waveform other than as on the specified
rating on the label (e.g., 120V~60Hz). We exclude all claims for special,
incidental, and consequential damages caused by breach of express or implied
warranty. All liability is limited to the amount of the purchase price. Every
implied warranty, including any statutory warranty or condition of
merchantability or fitness for a particular purpose, is disclaimed except to
the extent prohibited by law, in which case such warranty or condition is
limited to the duration of this written warranty. This warranty gives you
specific legal rights. You may have other legal rights that vary depending on
where you live. Some states or provinces do not allow limitations on implied
warranties or special, incidental, or consequential damages, so the foregoing
limitations may not apply to you.
For faster service, locate the model, type, and serial numbers on your
appliance.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant topart 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
For service assistance and product information,
please call: 1-800-968-9853.
Curtis International Ltd.
7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA, ON, L5S 2A3
www.curtisint.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>