SILION SLR1218 Desktop UHF RFID Reader-Writer Owner’s Manual
- June 9, 2024
- SiLION
Table of Contents
SILION SLR1218 Desktop UHF RFID Reader-Writer
Desktop UHF RFID reader/writer Hardware manual （For
SLR1218、SLR5218、SLR5318）
Edition ：V1.0 Date： 2020/1/17
Disclaimers
This document does not grant any license of intellectual property rights, and does not grant any license of intellectual property righ ts, express or implied, or by prohibiting speech or other means. Exce pt for the responsibilities stated in the terms and conditions of sal es of its products, our company does not assume any other responsibil ities. In addition, our company does not make any express or implied warranty on the sale and/or use of this product, including the applic ability of the product for a specific purpose, marketability, or liab ility for infringement of any patent, copyright or other intellectual property rights. The company may modify the product specifications a nd product descriptions at any time without notice.
Overview
This series of readers have built-in small gain PCB antenna, excellent structural design, can effectively prevent the tag from being misread or serial read, positioned in the use of close reading card scenarios. Suitable for supply chain management, asset management and other fields of card issuing applications and close card reading applications. At the same time, it can support the optional high-gain ceramic antenna, combined with the high- performance RFID module to meet the use of higher card reading performance scenarios. The series currently has three main products
| model | model difference |
|---|---|
| SLR1218 | Power range 5 – 30dbm，high-performance |
| SLR5318 | Power range 5 – 30dbm |
| SLR5218 | Power range 13 – 20dbm |
Technical Parameters
Label / transfer protocol
Tagged agreement| EPC Class 1 Gen 2（ISO18000-6C）
Radio frequency interface
Antenna connection| Default 0 dBi round polarized PCB antenna, optional
2 dBi round polarized ceramic antenna
Output power range
| SLR1218: 5dBM~30dBm Adjustment accuracy：1dBm SLR5318： 5dBM~30dBm Adjustment accuracy：1dBm
SLR5218：13dBM~20dBm Adjustment accuracy：1dBm
Receiving sensitivity
| SLR1218: < -85dBm
SLR5318：< -75dBm SLR5218：< -65dBm
Work area support
| ****
FCC（NA，SA）902-928MHz ETSI(EU) 865-867MHz
SRRC-MII(P.R.China)840-845 MHz、920-925MHz OPEN'(Custom)840-960MHz
Transmission control interface
communication
interface
| USB2.0 communication / RS232 serial port communication, portport
rate: 115200 bps (default)
Universal GPIO port| Two sets of inputs, and two sets of outputs
Work status tips| Power indicator, read card status indicator, buzzer
format
physical dimension| 110mm×110mm×16.5mm
Power supply / power consumption
DC power supply| USB power supply, external 5V (+ / -0.25V) power supply
power dissipation
| Work: (separate USB supply, only maximum transmitting power of 27 dBm)SLR1218: 3.9W(27dBm)/4.8W(30dBm) SLR5318: 2.7W(27dBm)/3.6W(30dBm)
SLR5218: 1.0W (20dBm)
Stand： SLR1218：0.35W SLR5318：0.25W SLR5218：0.25W
---|---
environmental character istics
working temperature| -10℃ – +55℃
Storage temperature| -20℃ – +60℃
function
Label reading rate
| SLR1218 ：> 100 tag/second SLR5318 ：> 50 tag/second SLR5218 ：> 50 tag/second
(In special case, related to labeling performance)
Read the card distance
| 0dBi PCB Antenna 2 dBi Ceramic Antenna SLR1218 ：5cm – 80cm SLR1218 ：20cm – 3.0m SLR5318 ：3cm – 60cm SLR5318 ：10cm – 2.5m SLR5218 ：10cm – 30cm SLR5218 ：60cm – 1.0m
The write distance is about 50% of the read distance(Test label: ALIEN9662 white card)
Hardware Description
Interface description
- USB： USB 1.1 / USB 2.0
- GPIO： (Universal Input / Output interface), from left to right (Pin 1- Pin 8)
| pin | Definition | instruction |
|---|---|---|
| 1 | +5V | The equipment is connected to 5V(+/-0.25V) power supply |
| 2 | GND | Power supply of equipment |
| 3 | TXD | RS232 serial port data output |
| 4 | RXD | RS232 Serial port data entry |
| 5 | IN1 | GPIO Input (5-12V) |
| 6 | IN2 | GPIO Input (5-12V) |
| 7 | OUT1 | GPIO output (5V) |
| 8 | OUT2 | GPIO output (5V) |
USB port / RS232 serial port communication switching switch:：
| switch | 1 | 2 | 3 |
|---|---|---|---|
| USB | ON | OFF | OFF |
| RS232 | OFF | ON | OFF |
- (P)Indicator light: power supply indicator light, always on the power on.
- (S)Indicator: Read the card indicator until the card is on.
Appearance size
Direction for use
link
Connect the device through a serial port cable or USB cable to power up the
device, (desktop right-click computer-Management-Device Manager-view the
available COM slogan). Connection setting: fill in the COM slogan for the
address, and select a single antenna for the number of antenna ports. Please
refer to the demonstration software instructions for specific functions.
GPIO control
Description: demonstrate the software-reader parameter GPIO interface setting
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Beijing Xinlianchuangzhan Electronic Technology Co., Ltd
Tel: （+86）010-62153842/62153840
http://www.silion.com.cn