FiTORCH P36 Powerful Rechargeable Flashlight User Manual

FiTORCH P36 Powerful Rechargeable Flashlight

POWERFUL RECHARGEABLE FLASHLIGHT 3000 LU MENS MAXIMUM OUTPUT

Specifications

• 3000 lumens maximum output and 346 meters maximum beam distance.
• High-performance LUMINUS SFT-70HD LED.
• USB Type-C charging.
• 21700-5000mAh USB rechargeable battery.
• Two-way clip.
• Modes: Turbo-High-Medium-Low-Eco and Strobe&SOS.
• Beacon guidance function.
• Power indication and low-voltage warning function.
• Dimensions: 426.2426.2L142.1MM.
• Weight: 101.7g(without battery)
• Accessories Included: 1 charging cable, 121700 USB rechargeable battery, 1 lanyard, 1 holster, 1 O-ring, 1 tail cap

P36 Data

Note : all data above were generated in Fitorch lab. Differences may happen based on usage and conditions.

Operation

• On/Off
  Press the tail switch to turn on the light, and then press the tail switch again to turn off the light.

• Mode change:
  When powered on, click the side switch to cycle through High-Medium-Low-Eco- Low-Medium-High.

• Strobe&SOS:
  Double-click the side switch to activate Strobe, and then double-click the side switch again to enter SOS.

• Turbo Function:
  When powered on, press the side switch and hold on 0.5s to activate Turbo mode.

• Beacon function:
  When powered on, click the side switch 4 times to activate the Beacon function.

• Charging
  Switch off the light and remove the USB cap to reveal the USB Type-C charging port, and then connect the charging port and the power source by charging cable. The indicator below the side switch will be red during charging, and it will change to green after charging.

Usage and Maintenance

• Disassembling the sealed head will damage the lights and void the warranty.
• High-quality batteries are recommended.
• O-ring will be worn after Long-term use, change it In the included spare one to maintain a watertight seal.
• Unload the batteries if the light won’t use a bit of a long time, then better put It into the Inner box(Built-in battery excluded).
• Store and keep the light off the fire, statics, steaming and humidity surroundings.
• Clean the body with soft fabric clothing then lubricate In silicon grease per half a year.
• Periodic cleaning of battery contacts to improve the flashlight performance as dirty contacts cause the lamp to flick, shine intermittently or even fail to illuminate for the below factors(Built-in battery excluded).
  • A: Battery needs replacing ( choose the battery which is mentioned on this manual)
  • B: PCB, Spring or other contacts is dirty (clean the contacts In a cotton swab In soak rubbing alcohol)

WARNING!

• Looking at the light for a long time will harm your eyes. Don’t shine the light directly into anyone’s eyes.
• The light will accumulate a lot of heat when used for extended periods, resulting in a high temperature of the light housing. Pay attention to safe use to avoid scalding.
• Do not shine the light to an object at close range to avoid burning the object or causing danger due to high temperature.
• The LED and battery of this light are not replaceable.

Warranty

• 15 days replacement: Fitorch will replace identical or equal products with documented manufacturing defects within 15 days of purchase.
• 5-year free repair: This light is non-detachable and enjoy the service of 5-year free repair of purchase if problems happen in normal use. Rechargeable battery enjoys 1- year warranty.

ShenZhen Fitorch Electronics Technology Co., Ltd
Office Address:6F, Longsheng Commercial Building Dalang St, Longhua new district ShenZhen City, China
Tel: +86-755-2101-3606
Web: www.fitorchworld.com
E-mail: [email protected]
CE RoHS
Web : www.fitorchworld.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>