FUYING FYSJP08CW Face Recognition Debugging User Manual

FUYING FYSJP08CW Face Recognition Debugging User Manual

Equipment wiring instructions

device management background settings – local debugging tools

1. confirm that the device is in the same LAN as the management computer, and the IP address of the input device in the browser (such as device lip: 192.168.1.189, input 192.168.1.189).
   

Note: Google Chrome is recommended
Account: admin

general parameters

Users can customize the device name and device content.

network parameters – configure device access

1. Cable network connection

   <1>dhcp open: automatically configure network IP and other information; <2>dhcp shut down: manually configure network IP and other information, andrefer to computer network parameters in detail.

2. Wireless network connection
   Hot shutdown, wired network DNS delete, input can use WiFi name and password,pay attention to the same case.

3. Hotspot connection
   For wireless computers, computers are directly linked to device hotspots. Hot Name: FaceClient_****, password: 12345678
   

cloud parameters – configuring cloud platforms and docking on devices

Main parameters: cloud push mode and push address. Face recognition cloud platform:
Push mode (WEBSOCKET) and push address
(ws://yun.fuyingkeji.com/webfnzn/face/fyface)
wireless network configuration: you must select “hot shutdown”, enter the fixed Internet WiFi name and password (DNS delete the wired connection parameter).

identify parameters – configure device identification comparison

parameters

Recognition mode: face, face or card;
Identification distance: 0.5 m below, 0.5-1 m, 1-2 m, 2-3 m, 3 m above;
The same face recognition interval (seconds): can be set for 0-99 seconds, fill in the number, the greater the number of recognition, the longer the interval; the living level: closed, low, medium and high, this content consulting technology;
In vivo method: live 1, live 2, this content consulting technology; face score: do not set up yourself, please contact technology;
Stranger identification: turn on and off; stranger identification
time: 0-3 seconds.
Card witness: the device with the ID card comparison function open

display parameters – configure device screen to display content

parameters

voice parameters – configure device voice content parameters

Volume: 0-10,0 minimum, 10 maximum;
Editable content is customizable to modify broadcast voice.

video image parameters – configure device image parameters

The above content can be maintained by default. If necessary, please contact the technology.

device interface parameters – configure device additional function

parameters

This content is related to technical adjustment

control command – device firmware parameters

Upgrading firmware: uploading.Bin files in compressed packages, prompting web pages to appear after upgrading, clearing up registration information: clearing personnel sent to equipment; Clear the traffic record: clear the record data of equipment identification.

application scenario – device application scenario configuration

No temperature
measurement:
general mode;
temperature
measurement: face
temperature measure

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired  operation.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment, In order to avoid the possibility of exceeding the FCC radio frequency exposure limits,Human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>