puro SOUND LABS BT2200 Volume Limited Kids Bluetooth Headphones User Manual

LABS BT2200 Volume Limited Kids Bluetooth Headphones
User Manual

Specification

Type of headphone: On-ear headphones
Volume limiting: 85 BA sound Limit
Ambient noise reduction: 83% of noise isolation
Wireless:  Bluetooth@ 5.0 wireless headphones
Wireless range: Up to 30 feet from Bluetooth@ source
Battery life: 20 hours playback, 20O hours standby
Battery type: Lithium-ion rechargeable
Drivers: 40 mm custom dynamic drivers
Dynamic range: 20Hz – 2OkHz with <1% total harmonic distortion

Quick Start (Pairing)

1. Charge the headphone until the blue light remains on (indicating full charge). This is accomplished by plugging the headphone into the charging cable, the charging cable into  the US wall charger, and connecting the US8 wall charger to an AC outlet (Charging may take up to 3 hours) ED LED= Charging & BLUE LED Fully Charged
2. Turn the Headphone on and enter “pairing” mode. For the first paring, the headphone LeD will fast flash BLUE and say “power on”&pairing”, indicating that it is ready to pair For subsequent product pairing, (the headphone will need to be turned on and) the Bluetooth button will need to be held for3 seconds to enter pairing mode
3. Being the source device within l meter of the headphone. Follow the source device instructions to look for discoverable devices. Select pup0gr20Os from the list You will hear connected when pairing is complete and the LED will change from a fast flashing blue Maslow flash blue. The headset is ready for music or phones us BLUE fast LED  flash = in pairing mode & BLUE slow LEO flash= paired

Wired Use

When using the Puro 3.5 limiter audio cable, make sure you insert the correct side into your headphones, there is a direction arrow on the black cabe showing which side goes into the headphones.
When going back to the Bluetooth connection, be sure to unplug the limiter cable.
“Note: when using the limiter audio cable, be sure to leave the headphones powered OFF as that can cause the audio to be low or not work as the power button is only for Bluetooth use.

Music Use

1. Choose media to playback and adjust the volume to your desired level
2. Place the headset on your (or your child’s head the size can be adjusted by pulling the arms” down or pushing them back into the “headband
3. The Bluetooth button can be used to pause and resume the playback of music
4. The Vol and Vol buttons can be pressed or he adjusted the volume to the desired level.

Phone Use

Initiate calls on your mobile handset. Music playback will be paused for the duration of the call. A short press of the Bluetooth button will end the phone call.
For incoming calls, a tone will sound on the Bluetooth headset.

• A short press of the Bluetooth button will answer the call.
• A one-second press of the Bluetooth button will reject the call. Hold the Bluetooth button until a tone is heard, then release.
• A three-second press of the Bluetooth button will transfer the call back to the handset. Another three-second press, while the phone call is underway, will return the call to the

Daisy Chain Sharing

Perfect for connecting two headsets to share one device

1. Connect headphone A to the device either Bluetooth or with the puro limiter audio cable.
2. Once headphone A is successfully connected, plug in the Daisy Chain cable (Micros8 MicroUSB cable) into headphone A followed by headphone B.
3. Power on headphone B if using a Bluetooth connection and begin playing the device being shared.

Safety Information

1. Continued exposure to loud noise (more than 85 decibels) (85 db) may cause gradual but permanent damage to hearing.
2. Do not use the headphones with products that can achieve levels above the “comfortable” guideline.
3. Do not use the headphones any time it would be dangerous to not be aware of noises around you.
4. If using while on an airplane, please follow the instructions of the crew for permitted use of a Bluetooth product.
5. Do not use or store the headphones in a wet environment. If the headphones are submerged or become wet, do not use.

Guarantee & Warranty

Puro Sound Labs, LLC warrants the original owner of this product against manufacturing and material defects under normal use for a period of one (1) year from the date of retail purchase from Puro Sound Labs or a Puro Sound Labs authorized reseller. The warranty does not cover damages resulting from misuse, abuse, water damage, normal wear and tear, or modification. For any questions or warranty claims, please contact our support team!
Phone: 1-888-590-PURO (7876)
Email: support@purosound.com

Our office hours are 9-5 PST. Please leave a message if outside of this time and we will get back to you within 24 hours.
Puro Sound Labs, at its sole discretion, will repair or replace the product, or refund the original owner the purchase price.

FCC Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• – Increase the separation between the equipment and receiver.
• -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• -Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

• This device may not cause interference.
• This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>