Westek TAPE10RCWF-T WiFi Enabled RGB/CCT LED Light Strip Instructions
- June 5, 2024
- Westek
Table of Contents
Westek TAPE10RCWF-T WiFi Enabled RGB/CCT LED Light Strip
TAPE10RCWF-T INSTRUCTION
Thank you for your purchase of this RGB and adjustable white WiFi enabled
light strip. Adjust from 16 colors using
the included remote, or pair to WiFi and enjoy up to 16 million colors or
adjustable white from 3000K to 5000K. These lights can be controlled with the
Westek app; you can even set your lights to wake you up to a soft glow and
slowly ramp up to a full-bright daylight lamp. Better yet, let Alexa or the
Google Assistant adjust them for you – the choice is yours!
Includes
(2) 5 meter light strips, WiFi controller, 24 key remote control, 120V power
supply
Optional Accessories
Tape light installation channel (CHNL20X4-T)
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS.
- If you have any concerns about the installation of this product consult a licensed electrician before continuing.
- Unplug before performing maintenance on this system.
- Use only insulated staples or plastic ties to secure cords.
- Not intended for recessed installation in soffits or ceilings.
- The National Electrical Code (NEC) does not permit cords to be concealed where damage to insulation may go unnoticed. To prevent fire danger, do not run cord behind walls or in ceilings, soffits, or cabinets where they may be inaccessible for examination. Cords should be visually examined periodically and immediately replaced when damage is noted.
Make sure to read and understand instructions fully before beginning installation of this light. Failure to do so may result in fire, injury, or damage to the product. Keep the instruction manual supplied with this product so it can be consulted during installation or maintenance of the light.
- This strip light can be cut to length and lengths can be reconnected to fit custom installation space as required.
- Always pay attention to the technical data provided on each product.
- Never operate this strip while it is coiled on the packing reel. Excess heat may damage the strip.
- Never use this strip light in an area where there is danger of explosion. Do not operate near flammable liquids or gases. Keep away from curtains, draperies or other combustible materials.
- There are no replaceable bulbs in this light.
- For Indoor Use. Not to be exposed to direct sunlight.
- Danger of eye damage. Do not look directly into the LED while it is lit.
- This is a class III device. The light is supplied by an isolated 12V power supply.
- This light strip should only be used with the power supply provided in the kit.
- Waste electrical products should be disposed of in a manner that is in compliance with local regulations.
Installation
- Choose desired mounting location. For best results, make sure surface is clean, dry and smooth. (Fig. 1)
- Measure for desired placement and assemble your lights before installing. (Fig. 2)
- Maximum total length for strips connected to a single supply is one length of one tape light.
- Never electrically connect two light strips that have separate power supplies. Doing so can damage the lights and present a risk of fire or injury.
- Only cut the light strip at the point where scissors appear on the light surface. (Fig. 3)
- When assembling, make sure all connections are secure before plugging in the transformer.
- After the assembled light has been tested, peel release liner from the rear of the light and firmly press the adhesive side of the light to the surface. (Fig. 4) It is recommended not to peel the entire release liner off all at once.
- Connect light strip and power supply to the WiFi controller. Plug into wall outlet in compliance with local regulations. (Fig. 5)
Specifications
Product SKU | Size | Weight | Color Temperature | CRI | Wattage | Linking |
---|
TAPE10RCWF-T
| 393.7”L x 0.375”W x 0.125”H (32.8’L x 0.03’W x 0.01’H)| ****
1.08 lb
| ****
RGB + 3000K to 5000K
| ****
80
| ****
24W
| ****
Not Linkable
WiFi Pairing
At first power-on, your light may flash to indicate it has entered pairing
mode. If your light is not flashing and you want to enable pairing mode,
unplug and re-plug the light strip in three times until your light begins to
flash rapidly. After 3 minutes, the device may time out if WiFi pairing is not
completed within this time. To restart the process, unplug and re-plug light
strip in three times until your light enters pairing mode again.
Download the WESTEK app from Google Play or the App Store or scan code below.
After registering and creating your account, click “Add Device”.
Ensure you have WiFi enabled. It is used to pair to the device to transfer
your WiFi
information, greatly simplifying the new device setup process.
Requires a 2.4GHz Wi-Fi Network. The lights are not compatible with 5GHz
wireless networks
Ensure you are connected to the same WiFi network that you want to connect to
your device. When ready, click “Auto Scan” to start scanning for your new
device. Select the Under Cabinet Light from the list (it may appear as Westek
WiFi Tape Light- RGBCCT).
WiFi Operation
In the Westek app main screen, you’ll have direct access to a power button on the product page. Click the power button to enable/disable the product directly, or click the product name to open its full menu. 4 operating modes exist: Adjustable White, Color, Scene and Music. Tap the corresponding name of the operating mode you’d like to use.
Adjustable White Mode
When in white mode, adjust brightness using the slider on the bottom of the
screen (1% to 100%) and adjust color temperature from 3000K to 5000K by
sliding the cursor on the adjustable color wheel.
Scenes
Scenes allow you to choose from one of eight preset modes. Mode selections
include night, read, working, leisure, soft, colorful, dazzling and gorgeous.
Tapping the edit button next to the main image allows you to change the name
of the scene, adjust the flash mode from static, flash or breathe and to
adjust the speed of the mode. Hit submit at the bottom of the page to save
your changes.
Sleep Timer
The timer function allows you to schedule a fixed amount of time for the
lights to remain on. Select Tap Timer and select your desired hours and
minutes until the light shuts off.
Power Button
Tap to turn the lights on/off
Color Mode
When in color mode, adjust brightness using the slider on the bottom of the
screen indicated by the icon, and adjust color saturation
using the bottom slider indicated by the icon. The adjustable color wheel
allows you to select any desired color – simply use your finger to slide the
brightness and color saturation to your desired values.
Music Mode
Switch your light strip in to music mode when you want to party! The light
strips have a built in microphone and the audio sensitive mode reacts to the
sound and the pulse of the music, changing colors to the beat.
Schedule
On the Schedule page, you can program specific on/off times and scenes for your lights by day of the week. For example, wake up to a dim orange glow, ramp up to max brightness at 5000K at noon, and fall asleep to a gentle 3000K nightlight!
Warning: Do not disassemble or modify this light. Modification voids the manufacturer’s warranty and any applicable regulatory certifications this light may possess.
Limited Warranty
Under normal use and conditions, AmerTac provides to the original purchaser of
this product a one year limited express warranty that is set forth in the
Limited Warranty stated in full at
www.amertac.com/warranties. The Limited
Warranty is in lieu of all other express or implied warranties or liabilities
subject to the exceptions explained fully in the Limited Warranty on the
website.
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.This equipment should be installed and operated with
minimum distance 20cm between the radiator& your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>