WESTEK TE02DHB Indoor 1-Outlet Digital Timer User Manual

WESTEK TE02DHB Indoor 1-Outlet Digital Timer User Manual

Before using your timer, please read the instructions carefully.

FEATURES

• 20 programmable ON/OFF settings per week
• 12-hour AM/PM & 24-hour display
• Programmable in 1-minute interval
• Random ON/OFF Feature (2~30 minutes of programmed time)
• Manual Override Button: select temporary for one program period, or permanent override.

KEY FUNCTIONS

• SET: set time and confirm the program setting
• [+]/[–]: increase or decrease digit in setting
• FUNCTION: change output state to
• ON/OFF and set program
• RESET: initialize or reset the unit

CLOCK TIME SETTING

1. Press the SET button for 3 seconds. Week digits will flash on display.
2. Using [+] or [–] buttons set the correct week. Weekday will increase or decrease continuously if [+] or [–] buttons are depressed for more than 1 second.
3. Press the SET button again to set the Hour. Hour digits will flash on display.
4. Using [+] or [–] buttons to set correct hours. Hour will increase or decrease continuously if [+] or [–] buttons are depressed for more than 1 second.
5. Press the SET button again to set Minutes. Minute digits will flash on display.
6. Using [+] or [–] buttons set the correct Minutes. Minute will increase or decrease continuously if [+] or [–] buttons are depressed for more than 1 second.
7. Press the [–] button for 3 seconds to choose 12 hours AM/PM or 24-hour display.
8. Press the [+] button for 3 seconds to set Daylight Saving Time, and ‘DST’ will appear on display. Press again to cancel.

PROGRAMMING OF SWITCHING TIMES (ON/OFF)

1. Press the FUNCTION button 5 times until ‘PROG 1 ON’ appears on display and flashes.

2. Press the SET button, using [+] or [–] buttons to set the Day(s) of the first program.

3. Press the SET button, using [+] or [–] buttons to set the hour of the first On program.

4. Press the SET button, using [+] or [–] buttons to set the minutes of the first ON program.

5. Press the SET button, “1 on” will flash. Press [+]. “1 off” will now flash.

6. Repeat steps 2-4 above to set the corresponding OFF time for Program 1.
   Note: Pressing and holding [+] or [–] buttons will rapidly increase or decrease time settings.
   Note: Pressing [+] or [–] buttons simultaneously cancels the current setting.

7. Repeat steps 2-5 to set ON/OFF times for additional programs (up to 20 total programs per week).

8. After all programs have been set, press the FUNCTION button to return to the “current time” screen.

9. If programming is interrupted for more than 10 seconds while setting the timer, until will automatically exit setting mode. Preset time will be preserved.
   Note1: Programming of switching times (ON/OFF) will not work properly if ‘PROG ON’ overlaps with ‘PROG OFF’.

RANDOM ON/OFF SECURITY FEATURE
Press the FUNCTION button until the ‘RND’ digits flash on display, and press the SET button to enter Random Mode. ‘RND’ will appear on display. Programmed ON/OFF time will randomly fluctuate in a range of 2~30 minutes. Repeat the operation above to cancel the ‘RND’ function

COUNT DOWN ON/OFF SETTING

1. Press the FUNCTION button 6 times until the ‘CTD’ and ‘ON’ digits flash on display.
2. Press the SET button, and ‘ON’ digits will flash on display, use [+] or [–] to set hours.
3. Press the SET button, and use [+] or [–] to set minutes.
4. Press the SET button, and use [+] or [–] to set seconds.
5. Press SET to initiate the countdown sequence. The device will turn on, the screen will indicate AUTO ON, and the remaining time will be shown on the screen.
6. When the countdown reaches 0:00:00, the device will turn off.
7. Press the FUNCTION button to check the current time
   Note: The countdown function overrides all others. Exit Countdown mode before using other functions.

MANUAL OVERRIDE SETTING

• Use the Function button to toggle settings.
• On: The device is On, and will not be subject to programmed settings.
• Off: The device is Off, and will not be subject to programmed settings.
• Auto On: The device is currently On, and will run settings as programmed.
• Auto Off: The device is currently Off and will run settings as programmed.

RESET BUTTON
Press the RESET button. The timer will resume in default status.

IMPORTANT SAFETY PRECAUTIONS

• Use indoors only.
• Keep devices out of the reach of children.
• Do not plug this timer into another timer switch.
• Do not plug any device performing mechanical movement directly into the timer.
• Do not insert needles or any other metal objects into the main outlet.
• Avoid moisture, extreme temperatures, shock and vibration.
• Do not open the timer. Repairs must be performed by authorized service personnel only.
• To clean the casing and display use a soft cloth. Do not use chemical or scouring agents. Do not submerge in water.

RATINGS

• 120VAC, 60Hz
• 5A, Resistive or General Purpose
• 240W Tungsten
• Back-up Battery: Rechargeable

CLASSE

• 120 Vca 60 Hz
• 5 A Résistif ou Utilisation Générale
• 240 W Tungstène
• Pile de secours: rechargeable

CLASSIFICATIONS

• 120 VAC, 60 Hz
• 5 A, Resistive o Uso General
• 240 W Tungsten
• Batería de respaldo: Recargable

Limited Year Warranty

AmerTac™ warrants this product to be free from defects in material and workmanship for one year from the date of purchase. AmerTac’s obligations are limited to repairing or replacing any defective unit and are effective only if such units are returned
within one year of the purchase date to AmerTac, 250 Boulder Drive, Breinigsville, PA 18031. Warranty void if damage is due to misuse or improper installation. In no circumstance will AmerTac be liable for consequential or incidental damages relating in any way to this product.

Questions?
2010 AmerTac™
250 Boulder Drive
Breinigsville, PA 18031
www.amertac.com
Made in China
Hecho en China
Fabriqué en Chine

Download PDF:WESTEK TE02DHB Indoor 1-Outlet Digital Timer User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>