ZKTECO EFace10 Visible Light Face Recognition Device Installation Guide
- June 5, 2024
- ZKTECO
Table of Contents
ZKTECO EFace10 Visible Light Face Recognition Device
How to Install the Device
- Attach the mounting template sticker to the wall, and drill holes according to the mounting paper.
- Fix the Backplate on the wall using the wall mounting screws.
- Attach the device to the Backplate.
- Fasten it with a security screw.
With Back Cover
- Attach the mounting template sticker to the wall, and drill holes according to the mounting paper.
- Fix the Back Cover on the wall using the wall mounting screws.
- Attach the device to the Back Cover.
- Fasten it with a security screw.
Desktop Placement
- Attach the Back Cover to the Device.
- Fasten it with a security screw.
Wiring Diagram
Power Connection:
Recommended AC Adapter
- 12V ± 10%, at least 1500mA.
- To share the power with other devices, use an AC Adapter with higher current ratings
Ethernet Connection:
Connect the device and computer software over an Ethernet cable. As shown in
the example below:
Click on [COMM.] > [Ethernet] > [IP Address] , input the IP address and click on [OK]. Note: In LAN, the IP addresses of the server (PC) and the device must be in the same network segment when connecting to the ZKBioAccess IVS software.
Lock Relay Connection:
The device not share power with the lock
Door Sensor, Exit Button & Auxiliary Input Connection
Download Center
Scan the QR Code to download the User Manual, Installation Guide and Quick Start Guide.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>