LEATT LT2114 MTB ALLMTN 1.0 JR Helmet Instruction Manual
- June 5, 2024
- LEATT
Table of Contents
LEATT LT2114 MTB ALLMTN 1.0 JR Helmet Instruction Manual
WARNING
HELMET FOR PEDAL CYCLISTS, SKATEBOARDERS OR ROLLER SKATERS. THIS HELMET SHOULD NOT BE USED BY CHILDREN WHILE CLIMBING OR DOING OTHER ACTIVITIES WHEN THERE IS A RICK OF STRANGULATION/HANGING IF THE CHILD GETS TRAPPED WITH THE HELMET. NO HELMET CAN PROTECT THE USER AGAINST ALL FORESEEABLE IMPACTS. SERIOUS INJURY OR DEATH MAY OCCUR WHIST WEARING A HELMET. READ OWNERS MANUAL BEFORE USE. FOR MAXIMUM PROTECTION, HELMET MUST BE FITTED AND ADJUSTED PROPERLY TO THE WEARER’S HEAD IN ACCORDANCE WITH THE OWNERS MANUAL FITTING INSTRUCTIONS. DESTROY AND REPLACE THE HELMET AFTER IMPACT – DAMAGE CAN BE INVISIBLE. CONSTRUCTED OF EXPANDED POLYSTYRENE. HELMETS CAN BE SERIOUSLY DAMAGED BY COMMON SUBSTANCES WITHOUT DAMAGE BEING VISIBLE TO THE USER SUCH AS: SOLVENTS, PAINTS, ADHESIVES AND CLEANING SOLUTIONS. CLEAN ONLY WITH MILD SOAP AND WATER. COMFORT PADDING CAN BE HAND WASHED AND AIR DRIED.
Instructions
Do not make any modifications to the helmet, this includes the outer shell, the inner EPS liner or chin strap, any and all modifications will void all warranties and affect the helmet’s performance.
The liner is essential to the intended performance of the helmet.
The helmet has a limited lifespan in use and should be replaced when it shows obvious signs of wear, e.g. change of fit, cracks, rust or fraying.
The Leatt® MTB Helmet forms part of the protective equipment ensemble available for use by participants in cycling activities. Always perform any cycling activity with caution and use/wear appropriate safety equipment.
The helmet can only protect if it fits well. Therefore, try different sizes and choose the size which feels right on the head. Recommended packaging for storage and transport is the helmet box and bag provided with the helmet.
Position the straps of the helmet so that they do not cover the ears, the buckle positioned away from the jawbone and the straps and buckle adjusted to be both comfortable and firm.
We recommend that you replace your helmet at least every five years from the date you start using it. Helmets may have to be replaced more frequently if they are subjected to intensive use.
Technical Features
- 1.1. Visor (Peak)
- 1.2. PC outer shell
- 1.3. Ventilation Exhausts
- 1.4. Helmet Retention System
- 1.5. Chin Strap Adjustment Clip
- 1.6. 3D in-molded impact foam
- 1.7. 360° Turbine Technology
Chin Strap Adjustment
Correct Fitment
Comfort Liner Removal
Visor (Peak) Removal and adjustment
Cleaning
Wipe only with a soft damp cloth in gentle soap or mild detergent in cold water, rinse by wiping with a soft cloth damped in cold water and dry with a soft cloth. Comfort padding can be hand washed and air dried.
Common substances applied to this product (solvent, cleaners, hair tonics, etc.) can cause damage that may be invisible to the user and compromise the effectiveness/safety of your Leatt® helmet. Always refer to the material content label on the helmet. None of the materials used in the construction of the product are known to contain anything that might cause an allergic reaction or be dangerous to health.
This product complies with the EU Regulation for Personal Protective Equipment (Regulation (EU) 2016/425)
Note: To view the Declaration of Conformity to PPE Regulation (EU) 2016/425 please navigate to leatt.com and select the DOCUMENTS tab on your product’s page.
Contact details
Head Office:
No 12, Kiepersol Crescent, Atlas Gardens,
Contermanskloof, Durbanville, 7550,
Cape Town, South Africa
Tel: +27 21 557 7257
Fax: +27 21 557 7381
Email: [email protected]
Website: www.leatt.com
Postal Address:
Suite 109, Private Bag X3, Bloubergrant,
7443, South Africa
USA:
Tel: 661 287 9258
Toll Free: 1.800.691.3314
Fax: 661 287 9688
Europe:
G.T. Sales Management
Breitenweg 19, 79426 Buggingen, Germany
Tel: +49 76319379157
Email: [email protected]
UK:
Chenoweth, Penzance, Cornwall, TR20 9SW, U.K.
Tel: +44 1736 762940
Email: [email protected]
WARRANTY
Your Leatt® product is warranted to be free of defects in materials or manufacturing for one year from date of purchase. Your Leatt® product may break under certain conditions of use, so damage caused by accidents, falls, abuse or misuse is not covered by this limited warranty.
To make a warranty claim, go to www.leatt.com or send an email to [email protected].
LEATT® CORPORATION EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Copyright © 2021, Leatt® Corporation 9
LEATTFEATURES
- Polymer Compound shell in three sizes
- 360° Turbine Technology
- Reduces up to 30% of head impact at concussion level
- Reduces up to 40% of rotational acceleration to head and brain
- 3D in-molded impact foam for great energy absorption
- Extended rear coverage for added protection
- 3-way adjustable visor
- Maximized ventilation with:
- 14 vents effective even at very low speeds
- MaxiFlow air channels in the impact foam
- Visor with breakaway function for rotational reduction in a crash
- Moisture wicking, breathable, anti-odor and washable inner liner
- Certified and tested to AS/NZS 2063:2008, EN1078, CPSC 1203
- Weight: ~ 325g
- S (51-55cm / 20 – 215/8″)
M (55-59cm / 215/8- 231/4″)
L (59-63cm / 231/4- 243/4″)
Made in China.
CE Approval by Telefication B.V. (Notified Body No. 0560), Wilmersdorf 50,
7327 AC Apeldoorn, The Netherlands.
This product complies with the EU Regulation for Personal Protective Equipment
(Regulation (EU) 2016/425)
UKCA Approved Body: SATRA Technology Centre, Wyndham Way, Northamptonshire NN16 8SD, United Kingdom, Approved Body Number 0321