LEATT LT1702 Mtb Allmtn 3.0 Helmet User Manual
- June 4, 2024
- LEATT
Table of Contents
LT1702 Mtb Allmtn 3.0 Helmet
User Manual
| 
---|---
| 
WARNING
HELMET FOR PEDAL CYCLISTS, SKATEBOARDERS, OR ROLLER SKATERS. THIS HELMET
SHOULD NOT BE USED BY CHILDREN WHILE CLIMBING OR DOING OTHER ACTIVITIES WHEN
THERE IS A RISK OF STRANGULATION/HANGING IF THE CHILD GETS TRAPPED WITH THE
HELMET. NO HELMET CAN PROTECT THE USER AGAINST ALL FORESEEABLE IMPACTS.
SERIOUS INJURY OR DEATH MAY OCCUR WHILST WEAR A HELMET. READ THE OWNER’S
MANUAL BEFORE USE. FOR MAXIMUM PROTECTION, THE HELMET MUST BE FITTED AND
ADJUSTED PROPERLY TO THE WEARER’S HEAD IN ACCORDANCE WITH THE OWNER’S MANUAL
FITTING INSTRUCTIONS. DESTROY AND REPLACE THE HELMET AFTER IMPACT – DAMAGE
CAN BE INVISIBLE. CONSTRUCTED OF EXPANDED POLYSTYRENE. HELMETS CAN BE
SERIOUSLY DAMAGED BY COMMON SUBSTANCES WITHOUT DAMAGE BEING VISIBLE TO THE
USER SUCH AS: SOLVENTS, PAINTS, ADHESIVES, AND CLEANING SOLUTIONS. CLEAN ONLY
WITH MILD SOAP AND WATER.
COMFORT PADDING CAN BE HAND WASHED AND AIR-DRIED.
Instructions
Do not make any modifications to the helmet, this includes the outer shell,
the inner EPS liner, or the chin strap, any and all modifications will void
all warranties and affect the helmet’s performance.
The liner is essential to the intended performance of the helmet.
The helmet has a limited lifespan in use and should be replaced when it shows
obvious signs of wear, e.g. change of fit, cracks, rust, or fraying.
The Leatt® MTB Helmet forms part of the protective equipment ensemble
available for use by participants in cycling activities. Always perform any
cycling activity with caution and use/wear appropriate safety equipment.
The helmet can only protect if it fits well. Therefore, try different sizes
and choose the size which feels right on the head. Recommended packaging for
storage and transport is the helmet box and bag provided with the helmet.
Position the straps of the helmet so that they do not cover the ears, the
buckle positioned away from the jawbone, and the straps and buckle adjusted to
be both comfortable and firm.
We recommend that you replace your helmet at least every five years from the
date you start using it. Helmets may have to be replaced more frequently if
they are subjected to intensive use.
Fig.1 (p.2-3) – Technical Features
1.1. Breakaway Visor (Peak) Screw
1.2. Visor (Peak)
1.3. PC outer shell
1.4. Ventilation Exhausts
1.5. Helmet Retention System
1.6. Chin Strap Adjustment Clip
1.7. Fidlock magnetic closure system
1.9. 3D in-molded impact foam
1.10. 360° Turbine Technology
Fig.2 (p.4) – Fidlock Magnetic Closure System
Fig.3 (p.4) – Chin Strap Adjustment
Fig.4 (p.4) – Correct Fitment
Fig.5 (p.5) – Comfort Liner Removal
Fig.6 (p.6) – Visor (Peak) Adjustment and Removal
Fig.7 (p.7) – Removing Broken Breakaway Visor (Peak) Screw
Cleaning
Wipe only with a soft damp cloth in gentle soap or a mild detergent in cold
water, rinse by wiping with a soft cloth damped in cold water and dry with a
soft cloth.
Comfort padding can be hand-washed and air dried.
Common substances applied to this product (solvent, cleaners, hair tonics, etc.) can cause damage that may be invisible to the user and compromise the effectiveness/safety of your Leatt® helmet. Always refer to the material content label on the helmet. None of the materials used in the construction of the product are known to contain anything that might cause an allergic reaction or be dangerous to health.
This product complies with the EU Regulation for Personal Protective Equipment
(Regulation (EU) 2016/425)
Note: To view the Declaration of Conformity to PPE Regulation (EU) 2016/425
please navigate to leatt.com and select the DOCUMENTS tab on your product’s
page.
Contact details
Head Office:
No 12, Kiepersol Crescent, Atlas Gardens,
Contermanskloof, Durbanville, 7550,
Cape Town, South Africa
Tel: +27 21 557 7257, Fax: +27 21 557 7381
Email: info@leatt.com, Website: www.leatt.com
Postal Address:
Suite 109, Private Bag X3, Bloubergrant,
7443, South Africa
USA:
Tel: 661 287 9258, Toll Free: 1.800.691.3314, Fax: 661 287 9688
Europe:
G.T. Sales Management
Breitenweg 19, 79426 Buggingen, Germany
Tel: +49 76319379157, Email: leatt-eu-contact@leatt.com
UK:
Chenoweth, Penzance, Cornwall, TR20 9SW, U.K.
Tel: +44 1736 762940 | Email: leatt-uk-contact@leatt.com
WARRANTY
Your Leatt® product is warranted to be free of defects in materials or
manufacturing for one year from the date of purchase. Your Leatt® product may
break under certain conditions of use, so damage caused by accidents, falls,
abuse, or misuse is not covered by this limited warranty.
To make a warranty claim, go to www.leatt.com or send an email to warranty@leatt.com.
LEATT® CORPORATION EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
LEATT® FEATURES
- Polymer Compound shell in three sizes
- Adjustable visor
- Fidlockmagnetic closure system
- 360°°Turbine Technology
- Reduced peak brain acceleration by up to 30% at impact speeds associated with concussion
- Reduces peak brain rotational acceleration by up to 40%
- Maximized ventilation with 18 vents effective even at low speeds
- Dri-Lex® moisture wicking, breathable, anti-odor, and washable inner liner
- In-molded impact foam for superior energy absorption
- Breakaway visor function for efficient impact force reduction
- Certified and tested: AS/NZS 2063:2008, EN1078, CPSC 1203
- Weight: from 360g (0.79 lbs)
- Sizing: S 51-55cm (20″-215/8 “) / M 55-59cm (21 5/8” -23 1/4 “) L 59-63cm (23 1/4” -24 3/4 “)
Made in China.
CE Approval by Telefication B.V. (Notified Body No. 0560),
Wilmersdorf 50, 7327 AC Apeldoorn, The Netherlands.
This product complies with the EU Regulation for Personal Protective Equipment
(Regulation (EU) 2016/425)
UKCA Approved Body: SATRA Technology Centre, Wyndham Way, Northamptonshire NN16 8SD, United Kingdom, Approved Body Number 0321
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>