CORSAIR iCUE LT200 Wireless Smart Lighting Tower User Manual
- June 5, 2024
- Corsair
Table of Contents
CORSAIR iCUE LT200 Wireless Smart Lighting Tower User Manual
PACKAGE CONTENTS
- 1 x diffused RGB lighting tower with stand
Lighting button
-
1 x USB-C to C Wall Adapter, 1800mm cable
-
1 x USB-C to A Receiver
-
1 x Wireless Receiver
SPECIFICATIONS
- Unit Dimensions 422mmx95mmx95mm (TBD)
- Power Inputs (AC Adapter) Wall Adapter, 5V 3A, 15W
- Tower: White plastic housing, Aluminum base, 96 individually addressable LEDs
- USB Cable USB-C to USB-C cable, 1800mm
- USB Connector Adapter USB-C to USB-A
- Wireless Receiver USB-A receiver, range of up to 30 feet
SET UP
Out of the Box Setup
-
Remove LT200 Smart Lighting Tower from box.
-
Connect the USB-C to C cable to the LT200 base and the wall adapter, plug the adapter into an available wall outlet.
-
Power on the LT200 by pressing the ON/OFF switch on the side of the
base. -
Press the lighting button to cycle through the preset lighting effects. The lighting button is disabled when LT200 is connected to Corsair iCUE.
The list of effects:
- Super X (Combination of predetermined effects)
- Rainbow Wave Color Shift
- Color Pulse
- Color Wave
- Static Color
- Sequential
- Marquee
- Rainbow
- Strobing
- Visor
Connecting LT200 to a PC via Corsair iCUE
- Turn on the PC and plug the wireless receiver into an available USB-A port. The LT200 Lighting Tower needs to be located within 30 feet of the wireless receiver and no interference for data transmission.
- Download CORSAIR iCUE software at www.corsair.com/downloads.
- Internet connection is required to download the latest. Run the installer program and follow instructions for installation.
- A maximum of 4 LT200 Lighting Towers can be paired to a single wireless receiver via Corsair iCUE software. (Additional tower is sold separately.)
- The LEDs can support 16.8M colors and update at rate of 25 times per second with no flickering.
**Pairing additional LT200 lighting tower(s) to a single wireless
receiver**
- Power on additional LT200 lighting tower.
- Initiate pairing by pressing and holding the lighting button for 10 seconds, the LT200 LEDs will pulse Blue.
- On the system that has the wireless receiver, complete pairing in Corsair iCUE software.
- If pairing is successful, the LT200 LEDs will turn Green to confirm.
- If pairing is unsuccessful, the LT200 LEDs will turn Red, repeat step 2 and try pairing again
Corsair Memory, Inc. declares that this equipment is compliance with Directive 2014/30/EU and 2011/65/EU. A copy of the original declaration of the conformity can be obtained at “regulatory@corsair.com.
Customer Service
iCUE LT200
WEB: corsair.com
Phone: 888-222-4346
Support: support.corsair.com
BlOG: corsair.com/blog
FORUM: forum.corsair.com
YOUTUBE: youtube.com/corsairhowto
Warranty
2-year warranty
Corsair Memory Inc. All rights reserved. CORSAIR and the sails logoo are registered trademarks in the United States and /or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from other pictured.
NA version
FCC
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept by 20cm from the user body or set the device to lower output power if such function is available.
FCC ID: 2AAFMRDD0007
ISED
Canada (ISED Statement)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
EU Version
CE
CORSAIR MEMORY, Inc. declares that this equipment is in compliance with Directive 2014/53/EU, Directive 2011/65/EU, and Directive 2009/125/EC. A copy of the original declaration of conformity can be obtained at “corsair.com/documentation”.
The Authorized Representative in Europe
Corsair Memory, BV
Wormerweg 8, 1311 XB, Almere, Netherlands
Frequency Band : 2.400 – 2.4835 GHz
Transmit Power EIRP : <20 dBm
Operating Temperature : 0°C ~ + 40°C
The Authorized Representative in Europe
Corsair Memory, BV
Wormerweg 8, 1311 XB, Almere, Netherlands
WEEE STATEMENT
EN (NA) NOTE ON ENVIRONMENTAL PROTECTION
After the implementation of the European Directive 2012/19/EU in the national legal system, the following applies:
Electrical and electronic devices may not be disposed of with domestic waste.
Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices, you are making an important contribution to protecting our environment.
Applicant Name: Corsair Memory, Inc.
Manufactured Year & Month: Please refer to S/N
Manufacturer & Country of Origin: Corsair Memory, Inc./Made in China
“KC logo & (wireless certified) number” (example below)