GENESIS 303 TITAN PROTECTIVE ARMOR Installation Guide
- June 5, 2024
- Genesis
Table of Contents
GENESIS 303 TITAN PROTECTIVE ARMOR
WHAT IN THE BOX
- PC case
- 120 mm fan
- SF1 – Screw stand-off for motherboard
- PS1 – Screw for PSU
- MB1 – Screw for Motherboard/SSD on HDD bracket
- HD1 – Screw for HDD in bracket
- SS1 – Screw for SSD on MB tray
- AV1 – SSD anti-vibration pad
- Cable tie
- Speaker
- Stand-off tool
- Installation guide
INSTRUCTION
SPECIFICATION
- Material: SPCC Steel, ABS, tempered Glass
- Motherboard Support: Micro-ATX, mini-ITX
- 3,5″ HDD Bays: 2
- 2,5″ SSD Bays: 3
- I/O Connectors: USB 3.0 x1, USB 2.0 x2, HD Audio Jack x2
- Expansion Slots: 4
- Cooling Support: Max 5 fans
- Front: 120/140 mm x2 (120 mm x1 installed),120/140/240 mm radiator support
- Rear: 120 mm x1 (installed)
- Top: 120/140 mm x2 (optional), 120/140/240 mm radiator support
- PSU Mounting / Standard: Bottom, ATX (max 19 cm)
- Max. CPU Cooler height: 163 mm
- Max. GPU Length: 375 mm
- Cable Management: 27 mm clearance
- Dust Filters: Bottom, top, front
- Weight: 5,8 kg
- Dimensions (LxWxH): 432 x 210 x 393 mm
FAN INSTALLATION
-
Remove front panel by gently pulling bottom part. Unscrew side panel
-
Install fans accordingly using screws and according to case plan
-
Suggested fan airflow orientation
2,5” SSD INSTALLATION ON MOTHERBOARD TRAY -
Put AV1 pads onto SS1 screws.
-
Next gently screw-in the screws (x4) with applied pads into SSD bottom screw holes.
-
Fix SSD into designated SSD tray holes.
Important note: Too tight screwing-in screws with applied pads might cause drive fastening in designated holes impossible (pads will get squeezed). Too lose might cause drive to fall off during transport.
2,5″ SSD DRIVE INSTALLATION ON 3,5″ HDD CAGE -
Remove HDD cage (pull out).
-
Screw-in SSD on top of HDD cage using MB1 (x4) screws into SSD bottom holes.
-
Install HDD cage (slot-in) with secured drive back into case.
3,5″ HDD DRIVE INSTALLATION -
Remove HDD cage (pull out).
-
As first screw-in HDD drive on top of HDD cage using HD1 (x4) screws into HDD bottom screw holes.
-
Second screw-in HDD drive inside HDD cage using HD1 (x4) screws into HDD side screw holes.
FRONT PANEL I/O PORTS INSTALLATION -
Connect front panel I/O connectors to motherboard according to motherboard manual.
WARRANTY
- 2 years limited manufacturer warranty
SAFETY INFORMATION
- For intentional purpose only.
- Non-authorized repairs or taking the device to pieces make the warranty void and may cause the product damage.
- Avoid to hit or friction with a hard object, otherwise it will lead to grind surface or other hardware damage.
- Do not use the product in low and high temperatures, in strong magnetic fields and in the damp or dusty atmosphere.
- Do not drop, knock, or shake the device. Rough handling can break it.
- Slots and openings in the case are provided for ventilation and should not be obscured. Blocking the vents can cause overheating of the device.
GENERAL
- The safe product, conforming to the EU requirements
- The product is made in accordance with RoHS European standard.
- The WEEE symbol (the crossed-out wheeled bin) using indicates that this product in not home waste. Appropriate waste management aids in avoiding consequences which are harmful for people and environment and result from dangerous materials used in the device, as well as improper storage and processing. Segregated household waste collection aids recycle materials and components of which the device was made. In order to get detailed information about recycling this product please contact your retailer or a local authority.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>