Mangotek RWC37 Wireless Charging Station Instruction Manual

Mangotek RWC37 Wireless Charging Station

OVERVIEW

1. Apple Watch Charger Module Pop up Button

2. Airpods 2 pro Wireless Charging Spot

3. Apple Watch Charge Module

4. LED Indicator

5. iPhone Wireless Charging Spot

6. USB-C Output Port

7.  DC Input Port
   Note: There are 2 different kinds of surface treatment for this wireless charger unit, which includes:

   • Black leather with space gray shell
   • Black woven finish with black shell

Product Introduction

Mangotek Charging station is a 3 in 1 charger solution for your Apple watch, iPhone 11/ 11 Pro or all the other Qi enabled devices, it can charge 3 devices simultaneously, support 7.5W fast charge for iPhone, 10W for Samsung mobile phones, 5W for other Qi enabled devices without wireless fast charger. There is another USB-C port which allows you to wired charge your mobile devices by plugging in a usb c to lightning charging cable or usb c to c charging cable(cable not included in the package) The Apple Watch charging station support night stand mode for your Watch

How to use

• Firstly, Connect the charger station with power electricity by using the included DC adaptor, Plug it in a wall outlet or power strip Secondly, Press the side button, the Apple watch charger module will pop up, place your Apple Watch onto the top of the integrated magnetic charge module, and there you go, it starts charging your Apple watch.
• Thirdly, Place your mobile devices such as iPhone 11, Samsung Galaxy S10 or AirPods onto the surface of wireless charging area, please remember there is always a best wireless charging spot, if there is no reaction, just adjust the your devices until they are being wireless charged successfully.
  Fourthly, There is another USB-C port at the back of the charger which allows you to use a USB C to lightning cable or USB C to USB C cable to FAST charge your mobile devices.(cable not included and a certified charging cable is highly recommended)

Product features

• Includes a DC 15 V/3.5A Power Adapter
• Input: DC 15/ 3.5A
• Output of USB C PD Charging Port: 5V 3A 9V 2A, 12V 1.5A
• Apple Watch Charger Module: 5V 1A Qi Wireless Fast Charge 10W for Samsung, 7.5W for iPhone Product Size: 178 x 138 x 22mm
• Operating temperature: 0℃ to +25℃
• Storage temperature: -20℃ to +70℃ Short Circuit Protection, Open Circuit Protection and Overcurrent protection

LED indicator status for mobile phone wireless charging ONLY

Charger station’s status| Power connected/ Waiting

for charging

|

Charging

|

Fully charged

|

FOD

---|---|---|---|---

Color of LED indicator

|

RED light long bright

|

BLUE light breathing

|

RED light long bright

|

RED and BLUE light Flashing

Note : There are two cases of FOD:
(1). One case is when powered on: This is an error of the Apple Watch Charger module’s self-checking, which may be because power supply voltage is too high, the temperature is abnormal, etc.
(2). The other case is the error of the working process: it is mainly to detect foreign objects or the temperature is too high

Product Compatibility

• 7.5W fast wireless charging: iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8 10W fast wireless charging: Samsung Galaxy Note 10/ Note 10 Plus/ S10 /S10 Plus/S10E, Samsung Galaxy S9/ S9 Plus/ S8/S8 Plus, Note 9, Note8, Samsung Galaxy S7/ S7 Edge/ S6 Edge Plus/ Note 5
• 5W standard wireless charging: Samsung Galaxy S9,S9 Plus, Note8, S8, Samsung S6, S6 Edge, Google Nexus 6 / 4 / 5/ 7(2013), AirPods 2, AirPods Pro
• Mobile devices wired PD fast charging Output 5V 3A 9V 2A, 12V 1.5A, cable is not included : iPhone XR/XS/XS Max, iPhone 8/8 Plus, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPad Pro 10.5-inch, iPad Pro 12.9-inch(2nd Generation), iPad Pro 9.7-inch, iPad Pro 12.9-inch(1st Generation), iPad Air(3rd generation), iPad Air 2, iPad Air, iPad mini(5th generation), iPad mini 4, iPad mini 3, iPad mini 2, Pad (7th generation), iPad (6th generation), iPad (5th generation), iPod touch (7th generation), iPod touch (6th generation), AirPods1/2
• Apple watch: Apple Watch Series 5, Apple Watch Series 4, Apple Watch Series 3, Apple Watch Series 2, Apple Watch Series 1, Apple Watch (1st generation).

Package Includes

Wireless charge station x 1
15V 3.5A DC adaptor x 1
Instruction book x 1

MFi Certification Statement

Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Caution

Please red all warning for your safety and optimal user experience. Please read and follow these instructions carefully and retain for your records:

1. Mangotek charger station will generate heat when charging, always charge in a well-ventilated area. Do not charge under pillows, blankets or on flammable surfaces.
2. Keep Mangotek charger station away from heat sources, direct sunlight, combustible gas, humidity, water or other liquids.
3. Do not disassemble, open, microwave, incinerate, paint or insert foreign objects into the charger station.
4. Do not subject the charger station to mechanical shock such as crushing, bending, puncturing or shredding, avoid dropping or placing heavy objects on the charger station.
5. Do not short circuit the charger station or store it in a receptacle where it may be short circuited by other metallic or conductive objects.
6.  Keep out the reach of children, please read the operation instructions including charging instructions and minimum and maximum operating temperature.

Attention

• The product is designed for use with IT equipment only.
• The maximum ambient temperature during use of the appliance must not exceed 25 degree.
• Naked flame sources, such as candles, must not be placed on the product. In case of broken cords or plugs, the product must be disposed of
• If you want to clean the product, only use a dry cloth or brush.
• The socket outlet shall be installed near the equipment and shall be easily accessible
• The power supply is not intended to be repaired by service personnel in case of failure or component defect( the product can be disposed of)

Warranty

The product is covered by a 12 months limited warranty from the date of this original purchase. For more information, please contact our support team:
Email: us@mangotek.cn

www.mangotek.com

Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Please note that the use of this accessory with an Apple product may affect wireless performance.
Apple Watch, iPad, iPad Air, iPad Pro, iPhone, and Lightning are trademarks of Apple Inc., registered in the U.S. and other countries. tvOS is a trademark of Apple Inc.

References

• Multiple Accessories, Colorful Dream

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>