JBC CTS Solder Pot Stand Instruction Manual

: June 5, 2024
: JBC

Table of Contents

Packing List
Features
Operation
Fixing CTS to Workbench
Spatulas
Maintenance
Safety
Specifications
Documents / Resources

www.jbctools.com
INSTRUCTION MANUAL

CTS
Solder Pot Stand

This manual corresponds to the following reference:
CT-SA

Packing List

The following items are included:

Solder Pot Stand …………………………….. 1 unit
Handle and Cartridge are not included

Spatula 17 mm …………………………………… 1 unit
Ref. 0018606

Spatula 39 mm …………………………………… 1 unit
Ref. 0018607

Spacers (x 2) ……………………………………….. 1 unit

Allen Key Ø 2 mm …………………………….. 1 unit

Tray ……………………………………………………….. 1 unit

Manual ………………………………………………….. 1 unit
Ref. 0029403

Features

Operation

The CT-SA Solder Pot Cartridge Stand holds the handle T245 or T470 with the Solder Pot Cartridge to avoid it tipping over accidentally. Find the cartridges available at www.jbctools.com As a safety precaution, before placing the handle, make sure the station is off and the tin is cold.

Unlock the screw and open the holder.
Place the handle with the cartridge. Be careful to position it correctly.
Once in place, lock the screw and connect the handle to the stand or the converter (Ref. CHB-A).

– Do not melt “Cored Flux solder”.
**** – Recommended temperature for fine wires (up to AWG 24 approx) and lead- free solder is 300ºC. For thicker wires, increase the temperature as necessary, but always the minimum possible.

Fixing CTS to Workbench

To fix the CT-SA in place, put the spacers (Ref. 0014899) between the stand and the workbench. This means you protect the stand’s rubber feet from wear and tear.
Use screws (we recommend M4) and assemble washers and self-locking nuts. Once fixed in place, check that the stand is stable and leveled.

Spatulas

Use the spatula to eliminate the dross (Oxide and other contaminants that form on the surface of molten solder)

|
---|---

Maintenance

– Allow to cool the device down before carrying out maintenance or storage.
– Always unplug the handle from the station and remove it from the stand.

– Use a damp cloth to clean the tray and the protective screen. Alcohol can only be used for cleaning the metal parts.
– Replace any defective or damaged parts. Use original JBC spare parts only.
– Repairs should only be performed by a JBC authorized technical service.

Safety

**** It is imperative to follow safety guidelines to prevent electric shock, injury, fire, or explosion.

Do not use the appliance for any purpose other than to hold the solder pot. It is not a tool stand.
Do not use the equipment in environments with a risk of fire or explosion.
Allow cooling before handling.
Before inserting the cartridge, turn off the station. If T470 is used, insert the cartridge and tighten the screw.
Use on a level and stable surface.
The stand can reach extreme temperatures. Glasses and protective gloves are recommended.
Do not melt “Cored Flux solder”.
Do not leave the appliance unattended when it is on. Turn off when not in use or not supervised.
Do not use next to flammable materials. Do not spill liquid into the solder pot.
Utmost care must be taken with liquid tin waste which can cause severe burns.
Keep your workplace clean and tidy.
Be careful with the fumes produced when soldering. The use of fume extractors is recommended.
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understanding the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision.
Maintenance must not be carried out by children unless supervised.

Specifications

CTS
Solder Pot Stand
Ref. CT-SA

– Product Dimensions (aprox.):
(L x W)| 92 x 48 mm
3.62 x 1.89 in
---|---
– Net Weight:
– Package Dimensions and Weight:
(L x H x W)| 999 g / 2.20 lb
342 x 155 x 120 mm / 1313 g
13.46 x 6.10 x 4.72 mm / 2.89 lb

Complies with CE standards.
ESD safe.

Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.
**** This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.

www.jbctools.com
0029403-100622

Documents / Resources

| JBC CTS Solder Pot Stand [pdf] Instruction Manual
CTS, Solder Pot Stand, CTS Solder Pot Stand, CT-SA
---|---
| JBC CTS Solder Pot Stand [pdf] Instruction Manual
CTS, Solder Pot Stand, CTS Solder Pot Stand, CT-SA