SARINA SA-DSSP Wireless Shower Speaker Instruction Manual
- June 5, 2024
- SARINA
Table of Contents
SARINA SA-DSSP Wireless Shower Speaker Instruction Manual
Please Read A Instructions Carefully
And Retain For Future Use
Packing Included
- Wireless speaker 1 pc
- Charging cable 1 pc
- User manual 1 oc
Specification
Output power: 3W
Input: 5V/0.5A
Battery: 400mAh/3.7V
Product size: 3.35 x 3.35 x 2.17 inches
Frequency range: 100Hz-18 KHZ
BT ID: D042258
FCC ID: 2AANZDSSP
Distributed by DGL Group, LTD.
2045 Lincoln Highway, Edison, NJ, 08817, USA.
Function Keys
Switch
Long press for turn on and turn off
Previous Track
Short Press this key to play previous music; Long press this key to decrease
the volume.
Next Track
Short Press this key to play next music; Long press this key to increase the
volume.
Hands-Free Calling
Short press for hang-up or answer the calling when the call incoming; Double
click to redial the last calling; Long press to reject the incoming call.
Pause/Play
Short press for pause the song, press again for resume to play the songs.
Bluetooth Connection
Use cell phone or other device search Bluetooth pairing name “SA-DSSP” to
connect, and the prompt voice will remind the Bluetooth connected
successfully.
Charging
Connect the charging cable to speaker’s DC port, insert the other end to a
adapter in 5V (not include). A red light is on when charging and will switch
off when full charge is reached.
Technical Specifications
| Wireless Version | V5.0 |
|---|---|
| Input | 5V/0.5A |
| Output Power | 4Ω 3W*1 |
| Maximum Working Range | 10 M |
| Music Playing Time | 1-2 Hours |
| Talking Time | 1-2 Hours |
| Battery Type | Built-in Lithium Battery (400mAh) |
| Size | 3.353.352.17 inches |
| Weight | 120G |
FCC STATEMENT
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.