SARINA PODCAST V8 Sound Card User Guide
- June 4, 2024
- SARINA
Table of Contents
SARINA PODCAST V8 Sound Card User Guide
Quick Start Reference/Troubleshooting:
- Press the power button for 3sec to turn the recording mixer on or off. The button will glow green when power is on and turn red when charging.
- If 6 red buttons are flashing or you hear a sound, the recording mixer needs to be charged. If not charged Immediately, sound quality may suffer. Please node that the recoiling mixer can be charged while in use however, it pick up noise from the charging current.
- Be sure all cables plugged into the recording mixer are properly inserted all the way, your mixer may no: output currency. If you’re connecting to a Pallone, please be sure to remove our phone case first as this may damage the cables
- Recording volume adjusts the output volume your listeners will hear. Be sure to test the output volume levels using the ”Record” knob to the desired output volume.
- When using a single mobile phone to broadcast, music volume and external backtrack volume is adjusted using the phone volume. The recording mixer volume controls the microphone. Who phone/computer away from the microphone. A feedback loop may occur if the output and impulse in the same area
- When using a computer to record, lest our microphone and sound mixer output before to record. your compiler will download the correct device drivers automatically. Your computer may need a restart to cur the microphone output on your computer’s volume control panel. We do not recommend using your microphone may pick up the sound. headphones or earphones for the -best results.
- Before each broadcast, We recommend you test all the mixer features to ensure they are wording. This way your recording can go on without issues
- Connect the Bluetooth accompaniment: turn on the Bluetooth of the mobile phone, search tile the power button indicator light of the sound card will be blue, indicating tallit the Bluetooth is connected.
- The included LCD display shows your volume and ed1o effect on a scale of 1-15 When you turn the MIC, Microphone volumes will scale When tum the Reverb, the echo effect scale.
Specifications
Mixer upper shell material: Metal knob, metal frosted body
Mixer card lower shell material: ABS plastic
Mixer card chip: DSP noise reduction chip
Mixer card dimensions: Sin x 4.1 in x 1.06in (127x106x27mm)
Supply voltage: DC/5V
Power supply mode: built-in 18650/3.7V11200MAH lithium battery
Use time: 8 hours with full power
Bluetooth version: 5.0
Frequency: 2.41-2.43ghz
BT ID: D060645
FCC ID: 2AANZPODC
Bluetooth connection
- Enable Bluetooth on the device of your choice, as shown in Figure( 1 );
- Your device will automatically detect the available equipment around, as shown in Figure(2);
- The recording mixer will appear as “SA-PODC” click to start pairing. “Bluetooth is connected” will play if the pairing is successful then you can select music sent to the sound card via Bluetooth as accompaniment music.
Setting up the Mixer:
Microphone Installation
- Screw the table clamp on the edge of a table.
- Insert the adjustable arm into the hole.
- The adjustable arm installation is complete.
- Fix Shock mount with Microphone stand.
- Mount the microphone on the stand.
- Fix the pop filter net on the cantilever support.
- The installation is complete.
Warranty Information
The condition of this warranty and our responsibilities under this warranty are as follows: Supplier’s warranty is non-transferable. And this wa1Tanty is limited to the original purchaser only.
- You must be able to prove the day of Original purchase of the unit with a dated receipt.
- Toe warranty is not applicable if the product has been subject to physical abuse, import installation, modification or repair by unauthorized third party.
- The responsibility of supplier’s products shall be limited to the repair of replacement of the product as its sole discretion.
- Specifically exempt from any warranty are components subject to normal wear and tear such as batteries, decorates and other accessors.
- A supplier will not take any responsivity the faller of the um has resulted from accident, abuse. misuse, or any unau1horized repair. modification or disassemble.
- Modification and repay’ of the unit should be clone by authorized and qualified service personnel, Center or returned to the ma.nu1acwrer.
- This warranty gives you specific legal rights, and you ma-/ also have other rights ,much vary under local laws.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circular different from that to which the receiver is connected.
- Consult the dealer or in experienced radio /TV technician for help.
SARINA guarantees the quality of this product. For questions or comments,
please feel free to contact us via email at
support@dglusa.com
Distributed by DGL Group, Ltd. Edison NJ 08817
www.dglusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>