Grand New Material CP-101 Wireless Carplay Adapter User Manual
- June 5, 2024
- Grand New Material
Table of Contents
Grand New Material CP-101 Wireless Carplay Adapter User Manual
Product function introduction
Wireless transmission brings a more convenient connection experience and greatly enhances the owner’s experience of using CarPlay.
Product Specification Parameters
Power input: 5V 1-2.1A
Product Power: 0.15W
Output Resolution: Adaptive
Compatible car models and iPhone devices
Search for the compatible models:
https://www.apple.cornliosicarplaylavailable-models/
Support iPhone 6 and later models, software version iOS 10 or above.
Product Connection
If the factory car supports CarPtay connection via USB cable, please plug the
product into the USB port in the car. Such USB ports may be marked with
CarPlay car icon or smart phone icon. Select CarPlay function in the car
system, it will enter the following interface
Picture 1
Make sure your iPhone’s Bluetooth and Wi-Fi features are turned on and no
other in-car devices are connected. On your iPhone, go to “Settings” >
“Bluetooth”, in Other Devices list, you will see a Bluetooth device name
starting with CarPlayBox, tap to pair, allow permissions and tap Use CarPlay
to Connect wirelessly.
Picture 2
Version update description
After connecting to wireless CarPlay, scan this QR code with your camera, or
enter 192.168.2.1 in the safari to enter the following interface
Note: You need an iphone and open mobile data function to access the
browser
Picture 3
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>