LEPY LP-168 Plus Digital Stereo Audio Power Amplifier User Manual

LEPY LP-168 Plus Digital Stereo Audio Power Amplifier

Using the Remote Control

1. Mode Switching
2. Power On/Off
3. Previous and Channel Up
4. Pause/Play
5. Volume Down
6. Switch Equalizer
7. Repeat Key
8. Numeric Keypad
9. Mute Volume
10. Next and Channel Down
11. Volume Up
12. Scan

Amplifier

Before operating, please read this manual completely

Features

• Internal high-quality Bluetooth module
• USB-BT(Bluetooth)
• Electronic volume control
• RCA input and output
• Input voltage DC 19V-24V
• Infrared remote control
• Bright illuminated display
• 2.1-channel sound output
• Subwoofer input

Panel function diagram

(Long press means press and hold button)

| PRESS| LONG PRESS
---|---|---
1| MODE SWAPPING| –
2| PREV CHANNEL| VOLUME DOWN
3| PLAY/PAUSE/SCAN| –
4| NEXT CHANNEL| VOLUME UP
5| REMOTE CONTROL SOCKET
6| USS SOCKET| –
7| DISPLAY SCREEN| –
8| REMOTE CONTROL RECEIVER
9| SUBWOOFER LEVEL INDICATION
10| SUBWOOFER CROSS-VOER CONTROL
11| SUBWOOFER LEVEL CONTROL
12| TREBLE LEVEL CONTROL
13| BASS LEVEL CONTROL
14| MAIN VOLUME LEVEL CONTROL

This is related to the position of the subwoofer, and usually only in the o·position;
If you cannot hear or the bass is very weak, please change it to the 180º position, and confirm the connection status of “ + – ” .

Basic Operations

Power On: To power ON, switch volume control clockwise. To power OFF, switch volume control counter clockwise. To power OFF/ON via the remote, use the key “ ” found on the remote control.

1. Power on/off Operation: The default status is LINE when initially power on; under status without disconnecting p,ower, it will restore automatically to the mode of operation prior to shutdown, such as LINE or BT(Bluetooth).
2. Volume Control: Switch volume knob clockwise or counterclockwise to get suitable volume, it also can be operated by pressing key +or- on remote control.
3. Sub Volume: Controls the level of the subwoofer with reference to the overall volume level Turn clockwise to increase, counter-clockwise to decrease .
4. X-Over: Controls the point where the bass moves from the speakers to the subwoofer. Turn clockwise to increase, counter-clockwise to decrease.
5. Mute Operation: Slightly press the key “ ” on remote control to control silence.
6. Pause/Play operation: Slightly press the key to control pause and play.
7. Musical Selection: Press key or key forwards or backwards to choose music, It also can be operated through the number keys found on your remote control.
8. Repeat Song: Slightly press the key “RPT” on remote control to repeat songs.
9. Mode Swapping: When BT(Bluetooth), LINE are plugged into the amplifier, the mode can be changed by pressing “MODE” key . The sequence is: BT (Bluetooth) >LINE.In the absence of insert BT(Bluetooth) or LINE show only LINE> BT(Bluetooth).
10. LINE Operation: Press “MODE” key to get into LINE status, then plug your external audio source into the RCA inputs. Under “LINE” status, you can swap to another mode by pressing “MODE” or plugging in a BT(Bluetooth) or USS.
11. Band Equalizer: Under status of USS or SD/MMC, Repeat “EQ” key on your remote control to rotate the equalizer. The swapping sequence is: FLAT> ROCK> POPS> JAZZ> CLASSIC> FLAT(EQoff).
12. LINE Operation: Press the “MODE” key to get into LINE status, then plug an external audio source into RCA inputs.

FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
To comply with FCC RF exposure compliance requirements, this grant is applicable to only mobile configurations. The antennas used for this transmitter must be installed to provide a separation di stance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>