Anker Innovations A2930 Wireless Charger User Guide
- June 5, 2024
- Anker Innovations
Table of Contents
A2930- Manual – EN – 20210617
Wireless Charger
What’s in the box?
Overview
- Mounting Base
- Adjusting Screw
- Led Indicator
- Wireless Charging Pad
- USB Car Charger
Using your Charging Mount
Postion your Charging Mount on a center panel
|
---|---
Do not place the Charging Mount on airbag modules, as doing so may result in
serious injury.
Do not insert the Charging Mount into a vent.
Insert the car charger into the cigarette lighter of a vehicle
Connect the Charging Mount to the car charger using the power cable
When running the cable from the Charging Mount to the car charger, ensure the
cable does not affect safe driving.
The steering wheel should move freely, all pedals should work normally, turn
signal and wiper stalks should also move smoothly.
Use the cable clips to fix the cable in place.
Adjust the Charging Mount to the optimal viewing angle
Be careful when removing or handling plastic parts of the Charging Mount.
Unnecessary force or pressure can cause pieces to crack or break. Do not over-
rotate the wireless charging pad or attempt to detach the ball joint lock,
otherwise, the wire near it may be destroyed or the product won’t be able to
charge normally.
Charge your phone
| Apple| iPhone 12 mini, iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max
---|---|---
LED Indicators| Status
---|---
Light up one by one quickly then stay solid white| Connected to power
Solid white (100% brightness)| Charging your device
Solid white (50% brightness)| Standby mode
Flash white| Metal objects detected
Only Led lights on the two sides flash white| • Overvoltage or undervoltage
protection
• Incompatible power adapter connected, indicating that you need to switch to
a Quick Charge 2.0/3.0 or Power Delivery car adapter
- This wireless charger is not compatible with non-Magsafe phone cases, such as Otterbox Defender cases.
- Connect the Charging Mount to a Quick Charge 2.0/3.0 or Power Delivery car adapter. Do not connect to a 5V/1A car charger or a USB-A port on a car as it may affect the wireless charging function.
- Do not place any foreign objects between your device and the wireless charging pad’s surface, including metal pads, magnetic cards, door keys, coins, NFC cards, or other metal objects, as they could potentially demagnetize the wireless charging pad, affect the charging speed, or cause overheating.
- Wireless charging products make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers.
- High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 40°C / 104°F.
- Do not operate the charger with damaged cord or cigarette lighter connector—replace it immediately.
Important Safety Instructions
Please refer to the electrical and safety information on the bottom before installing or operating the product.
- Avoid dropping.
- Do not disassemble.
- Do not expose to liquids.
- This product is suitable for moderate climates only.
- The maximum ambient temperature during use of this product must not exceed 40°C.
- Open flame sources, such as candles, must not be placed on this product.
- Only use a dry cloth or brush to clean this product.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator & your body.
Product Name: Wireless Charger
Model: A2930
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 800 988 7973
IC Statement
This device complies with RSS ‐216 of Industry Canada. Operation is subject to
the condition that this device does not cause harmful interference.
RSS-Gen statement
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF exposure statement:
The equipment complies with IC Radiation exposure limit set forth for
uncontrolled environment. This equipment should be installed and operated with
minimum distance 10cm between the radiator and your body.
This device complies with Industry Canada license‐ICES-003. Operation is
subject to the following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).
Declaration of Conformity
Hereby, Anker Innovations Limited declares that product type A2930 is in
compliance with Directives 2014/53/EU & 2011/65/EU & 2001/95/EC. The full text
of the EU declaration of conformity is available at the following internet
address: https://www.anker.com/
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2930 is in
compliance with Radio Equipment Regulations 2017 and The Restriction of the
Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012. The full text of the GB declaration of conformity is
available at the following internet address: https://www.anker.com
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany
Anker Technology (UK) Ltd
Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United
Kingdom
This device was tested for uncontrolled environment operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the product.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2930 is in
compliance with following Directives: Radio Equipment Regulations 2017,
Electrical Equipment (Safety) Regulations 2016, Electromagnetic Compatibility
Regulations 2016 and The Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment Regulations 2012. The full
text of the UK declaration of conformity is available at the following
internet address: https://www.anker.com/
Specifications
Magnetic
Car
Charger| Input| 5V 2A/9V 2A
---|---|---
Wireless Output| 5W / 7.5W
Operating Temperature| -10°C – 40 °C
Radiated H-Field| -11 4 dBitA/m(@10m)
| TX/RX frequency range| 110-205KHz (only for EU and UK)
USB Car Charger| Input| 12V / 24V 4A
Output| USB-C: 5V 3A, 9V 2.22A
USB-A: 5V 2.4A, 9V 1.67A, 12V 1.25A
Product Number: A2930
Wireless Charger
This product complies with the radio interference requirements of the European Community.
This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Customer Service
18-Month Limited Warranty Lifetime Technical Support
support@anker.com
support.mea@anker.com (For Middle East and
Africa Only)
(US) +1 (800) 988 7973 Mon-Fri 9:00 – 17:00 (PT)
(UK) +44 (0) 1604 936200 Mon-Sun 6:00 – 14:00
For FAQs and more information, please visit https://www.anker.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>