GPB-MB10 10000mAh Power Bank

“`html

Product Specification

Document Number: BBD-WI-001

Product Name: POWER BANK-GPB 10000mAh

Product Model: GPB-MB10(Black);
GPB-MW10(White); GPB-MX10(X represents the color variable)

Edition: V1.0

Date: 2023.12.8

Specification: (38.5Wh) 3.85V/10000mAh

Specifications

Product Usage Instructions

Working Modes:

• Sleep Mode: Automatically entered when no keys are pressed, no
  load, no charge. Saves power consumption for longer storage
  time.

• Standby Mode: –

• Operation Mode: –

Charging Information:

• Input Voltage Range: 4.5-14V
• Output Voltage Range: 4.9-5.25V, 8.5-9.5V, 11.5-12.5V
• Charging Time Estimates: 3.5h at 5V, 3A; 3h at 9V, 2A; 3h at
  12V, 1.5A

Frequently Asked Questions (FAQ)

Q: How long does it take to fully charge the power bank?

A: The charging time varies depending on the input voltage and
current. It is estimated to take around 3.5 hours at 5V, 3A; 3
hours at 9V, 2A; and 3 hours at 12V, 1.5A.

Q: What are the different working modes of the power bank?

A: The power bank has three working modes – Sleep, Standby, and
Operation. Sleep mode activates when no keys are pressed, and there
is no load or charge to save power consumption.

“`

Manual
Product Specification
Document NumberBBD-WI-001 Product NamePOWER BANK-GPB 10000mAh Product Model GPB-MB10(Black); GPB-MW10(White); GPB-MX10(X represents the color variable) EditionV1.0
Date: 2023.12.8 From: Aspirer Model No: GPB-MB10(Black); GPB-MW10(White); GPB- MX10(X represents the color variable) Specification: (38.5Wh) 3.85V/10000mAh Total No. of Pages :Total 16 pages including this cover sheet 16 (
Audit confirmation:
ShenZhen FAB-CHAIN SERVICE Co. Ltd
5th Floor ,Bldg A,Chuang Jian Industrial Park,2028#,Song Bai Road,shiyan,BaoAn,ShenZhen,China
: A5/B4
Http://www.fab-chain.comPage 1 of 18

Aspirer

Name Date

Written

Checked

Checked

ShenZhen FAB-CHAIN SERVICE Co. Ltd
5th Floor ,Bldg A,Chuang Jian Industrial Park,2028#,Song Bai Road,shiyan,BaoAn,ShenZhen,China
: A5/B4
Http://www.fab-chain.comPage 2 of 18

Update history

No.

Date

Edition

1

2023.12.8

V1.0

Contents
Initial release

ShenZhen FAB-CHAIN SERVICE Co. Ltd
5th Floor ,Bldg A,Chuang Jian Industrial Park,2028#,Song Bai Road,shiyan,BaoAn,ShenZhen,China
: A5/B4
Http://www.fab-chain.comPage 3 of 18

1 Scope of application……………………………4 2 Product parameters…………………………..5-10 3 Reliability and Safety Testing…………10 4 Mechanical…………………………………..11-13 5PCB PCB and Board Connection…………………..14 6 Electrical block diagram ……………………..15 7 Schematic diagram……………………………….15 8 Storage…………………………………………..15 9 Matters needing attention……………………….16
ShenZhen FAB-CHAIN SERVICE Co. Ltd
5th Floor ,Bldg A,Chuang Jian Industrial Park,2028#,Song Bai Road,shiyan,BaoAn,ShenZhen,China
: A5/B4
Http://www.fab-chain.comPage 4 of 18

1 Scope of application This specification is applicable to the mobile power supply produced by our company.
Product components: 1.1 1 section10000mAh/3.85V Electric core 1.2 2 Chip Circuit Master Control Board 1.3 Shell and other structural parts 1.4 Test Conditions and Instruments and Equipment Requirements a Test environment conditions bUnless otherwise specified, the tests in this specification shall be conducted under standard atmospheric conditions. c temperature25 d relative humidity10%~90% e Atmospheric qualityAM1.5 f 0.5 10K/V The instrument accuracy of measuring voltage should be no less than 0.5 grade and the internal resistance should be no less than 10K/V. g 0.5 The instrument accuracy of measuring current should not be less than 0.5 grade. h±1The accuracy of the instrument used for measuring temperature should not be less than (+1 C) 1.5 Working state of mobile power supply
Mobile power supply has three working modes: sleep, standby and operation. Tsleep Tsleep Tsleep No response in Tsleep: refers to not pressing keys, no load, no charge in the sleep waiting time (Tsleep). Batteries will automatically sleep to save power consumption, so as to achieve longer storage time. Tsleep is about half a year old.
ShenZhen FAB-CHAIN SERVICE Co. Ltd
5th Floor ,Bldg A,Chuang Jian Industrial Park,2028#,Song Bai Road,shiyan,BaoAn,ShenZhen,China
: A5/B4
Http://www.fab-chain.comPage 5 of 18

2. Product Parameters

Performance as scheduled

project

capacity /mAh

weight /g

size /mm

Self-consuming

electricity /uA

Ov Charging

er temperature /

al Discharge

l

temperature /

ch Storage

ar humidity

ac Storage

te Temperature/ ri st Machinecase ic temperature / s

Conversion Rate of

Whole Machine /%

size/mm Core Category Nominal capacity /mAh Co Standard re voltage /V ch nternal ar resistance /m ac te Authentication ri st ic cycle life s

standard 10000mAh /3.85V
245 1097120.30 <700uA (MAX)
0-40 -10-40 75% 535
65
70 126280 Polymer battery 10000 3.85V
<60 –
300
4.4±0.05

Remarks 0.2C Discharge with discharge cabinet at 0.2C current Tolerance range±10g Tolerance range±0.3mm
Average Standby Current
ambient temperature 4 2 Low temperature 4 hours, high temperature 2 hours
/
Half a year
25ambient temperature25
5V/1A
±0.5mmTolerance range: +0.5mm /
/
/
/ Reference Core Specification 3 80% Battery discharge capacity less than 80% of rated capacity for three consecutive times is the end of life.

ShenZhen FAB-CHAIN SERVICE Co. Ltd

5th Floor ,Bldg A,Chuang Jian Industrial Park,2028#,Song Bai Road,shiyan,BaoAn,ShenZhen,China
: A5/B4

Http://www.fab-chain.comPage 6 of 18

Overcharge

protection /V

Overdischarge

2.4±0.1

lithi protection /V

um

Overcurrent

15±3

Ele

protection /A

ctri

cal

prot

ecti

Short circuit

on

protection

perf

function

YES

100 m P+,P-Short-circuit P+, P with 100 m_load-

orm

anc

e

Charging mode

MICRO Charge

Charging mode

– Constant Current-Constant Pressure

/

Charging

input

/

/

voltage

/

/

ICHG/mACharging

/

Ch current

/

ar

/

/

gi

Full of

ng

time /h

/

/

/

/

ch

ar

/

/

ac

Full Voltage /V

te Type-c Charge

ri Charging st mode

–

CC/CV 18W

ic

5V

PCBA

s Charging

input

9V

4.8VSupporting charging current

voltage

12V

varies according to CC/CV mode of charging

5V;0-3000 CC 2.5-3.3A management, 18W fast charging, charging

9V;0-2000 CC 1.5-2.2A

current is determined by the voltage of

ICHG/mACharging

external power supply and the length of

current

12V;0-1500 CC 1.2-1.75A connection line. It is recommended that

the input voltage of PCBA terminal be >

ShenZhen FAB-CHAIN SERVICE Co. Ltd

5th Floor ,Bldg A,Chuang Jian Industrial Park,2028#,Song Bai Road,shiyan,BaoAn,ShenZhen,China
: A5/B4

Http://www.fab-chain.comPage 7 of 18

Full of time/h
Full Voltage /V Input voltage range /V Input Overvoltage Protection Range /V Output port USBA1 QC Output No-load Voltage
/V
USBA1 QC Output Load Voltage /V
USBA1 QC Output Port
USB2 Output No-load Voltage /V
USB2 Output Load Voltage/V
USB2 Output Port Ripple /mV
Type-c PD3.0 Output no-load voltage/V
Type-c PD3.0 Output Load Voltage/V
Type-c Output Port

Estimate 3.5h5V,3A Estimate 3h9V,2A Estimate 3h12V,1.5A
4.4±0.05
4.5-14
14±0.5
4.9-5.25 8.5-9.5 11.5-12.5 4.75-5.25 8.5-9.5 11.5-12.5 D+/V OUT/5V D-/V OUT/5V D+/V OUT/9V D-/V OUT/9V D+/V OUT/12V D-/V OUT/12V
/
/
/ / <150 4.9-5.25 8.5-9.5 11.5-12.5 4.75-5.25 8.5-9.5 11.5-12.5 D+/V OUT/5V D-/V OUT/5V D+/V OUT/9V D-/V OUT/9V D+/V OUT/12V D-/V OUT/12V

4.8V. / / / /
/
PCBA PCBA Board End Voltage
No load
3.0A USB 2.0A USB 1.5A USB 2.7±0.2 No load 2.7±0.2 No load
/ / / / /
/
/
No load
3.0A USB 2.22 A USB 1.67A USB 2.7±0.2 No load 2.7±0.2 No load
/ / /

ShenZhen FAB-CHAIN SERVICE Co. Ltd
5th Floor ,Bldg A,Chuang Jian Industrial Park,2028#,Song Bai Road,shiyan,BaoAn,ShenZhen,China
: A5/B4
Http://www.fab-chain.comPage 8 of 18

Ripple /mV

<150

3.0A

5W

Wireless charging output

7.5W 10w

15w

Simultaneous output

5V/3A

TYPE-C+USBA1+Wireless

Overdischarge voltage

2.9±0.2

/

protection /V

Overcurrent protection /A

3.6±0.5

When the load current increases, the voltage output will be automatically reduced, and the load button

will be removed to restore.

Short circuit protection

YES

Pull out load automatic recovery

Output efficiency

85%

PCBA PCBA efficiency

Fill and place

5V1A

The output has no short circuit protection when charging and discharging

Output open no-load

<20mA

/

current

Current and time of light

<100mA, 25±10S

/

load shutdown

USB1,TYPE-C

Supports USB1,TYPE-C, and wireless

charging to automatically identify the

Key load output. When the product has

Output mode

switch and automatic output

overcurrent protection or short circuit protection, the protection needs to be removed and the load needs to be reinserted to automatically turn on the output. When

the product is powered on for the first

time or the battery voltage is too low to

trigger the low power shutdown, it needs

to be activated by charging.

basic function

Key

Power on: Press once Shutdown: Double click

ShenZhen FAB-CHAIN SERVICE Co. Ltd

5th Floor ,Bldg A,Chuang Jian Industrial Park,2028#,Song Bai Road,shiyan,BaoAn,ShenZhen,China
: A5/B4

Http://www.fab-chain.comPage 9 of 18

1Type-c , LED

2USB1 Type-c LED

5%

3

Working mode

1. Type-c charging, white LED running horse side, indicating the current charging indicator flashing.

2. When USB1 or Type-c is exported, the white LED

displays the current power. When the product power is

reduced to 5%, the indicator lights flicker and the

power is not enough.

3.When the product is in sleep mode, press the button

to turn on output and check the battery level.

Electricity Indicating Stat

25%

26%—50%

51%—75%

76%—99%

100%

LED

Electric quantity 25% the first light flash

charging indicator status Electric quantity 26% – 50% the second light flash

Electric quantity 51% – 75% the third light flash

Electric quantity 76% – 99% the fourth light flash

Electric quantity 100% charge full LED lights all lights on

*LEDAll the LEDS will run the same way

the first time the power is turned on

Charge+ discharge

Display charging status

indicator status

LED

Fully charged indicator

All LED turns light

No power

No power

5%

The first LED flashingBattery low voltagealarm

6%—25%

One LED on

26%—50%

Two LED on

51%—75%

Three LED on

LED /Wireless charging LED indicator

76%—100%

Four LED on

1. LED 1 2 LED 1. Wireless

output opens green LED light flash 1, then extinguishes. 2. During wireless charging, the LED

light goes out, and the light flashes when there are foreign matters.

ShenZhen FAB-CHAIN SERVICE Co. Ltd
5th Floor ,Bldg A,Chuang Jian Industrial Park,2028#,Song Bai Road,shiyan,BaoAn,ShenZhen,China
: A5/B4
Http://www.fab-chain.comPage 10 of 18

TYPE-C1 C A port support protocol
USBA1/USBA2 A A port support protocol

5V/3A 9V/2A 12V/1.5A 18W

TYPE-C 5V/3A 9V/2.22A 12V/1.67A 20W

USB-A 5V/3A 9V/2A 10V/2.25A 12V/1.5A 22.5W 5W 7.5W 10W 15W MAX

5V3A 15W

APPLE 5V2.4A SAMSUNG 5V2.0A BC1.2 DCP 1.5A

QC2.0 9V 12V QC3.0 3.6-12V QC4+ SAMSUNG AFC 9V 12V

HUAWEI FCP 5.0V 9.0V 18W HUAWEI SCP 3.4-12V 25W

MTK PE1.1 PE2.0

PD3.0 PPS 22W 5V3A 9V2.22A 12V1.67A

5.0-5.9V 3A 5.0-11.0V 2A

APPLE 5V2.4A SAMSUNG 5V2.0A BC1.2 DCP 1.5A

QC2.0 5V 9V 12V QC3.0 3.6-12V SAMSUNG AFC 9V 12V

HUAWEI FCP 9V 12V 18W HUAWEI SCP 3.4-12V 25W

MTK PE1.1 PE2.0

3 Reliability and Safety Testing

Serial number

Test items

Standard requirements

Remarks

5V , 1 , 4.45VAdd

Overcharg 5V charging voltage at the charging end and continue charging for

1 e

1 day after full charge. The core voltage does not exceed 4.45V.

protectio

n

, 2.9±0.2V ,The

Overdisch product is set to discharge. When the voltage of the core is less

2

arge than 2.9 + 0.2V, the output of the product will be closed.

protectio

n

, 0.1m 1H,

Short When charged, the battery pack should not smoke, explode, ignite or

3

circuit smell with 0.1m_resistance short circuit output 1H.

protectio

n

1 1 Drop test 1m, fall three times on each 4
Drop test side.

150CPM 2.5HZ 90min3 =30s/

According to the speed 150CPM,

5 Vibration frequency 2.5HZ, time 90min (3 sides = 30s/side) simulated vibration,

test

packaging must not be seriously damaged, the product should not

exceed the functional standard.

ShenZhen FAB-CHAIN SERVICE Co. Ltd

5th Floor ,Bldg A,Chuang Jian Industrial Park,2028#,Song Bai Road,shiyan,BaoAn,ShenZhen,China
: A5/B4

Http://www.fab-chain.comPage 11 of 18

, 200g , 30~40 /

200 / Use cotton cloth to dip in alcohol and

Alcohol wrap it on a 200 g French wharf. Wipe it 200 times at 30-40 times

Resistanc per second (once back and forth). No primer can be exposed/unpainted. 7
e Testing

of

Spraying

Coatings

, 200g , 30~40 /

100 Dip a cotton cloth full of

Screen alcohol and wrap it on a 200g weight dock. Wipe it 100 times at a

8

Printing speed of 30-40 times/second (once back and forth). After testing,

Wear the silk screen font should not fall off.

Resistanc

e Test

4. Mechanical
Shell Material Plastic PC+ABS Assembly mode Buckle surface treatment Rubber oil Fire Grade 94V-0 4-1.(:mm ±0.3mm) Outside Drawing (Unit: mm Tolerance±0.3mm)

4-2. Assembly Diagram
ShenZhen FAB-CHAIN SERVICE Co. Ltd
5th Floor ,Bldg A,Chuang Jian Industrial Park,2028#,Song Bai Road,shiyan,BaoAn,ShenZhen,China
: A5/B4
Http://www.fab-chain.comPage 12 of 18

4-3: Photo of the Product and Pin Assignment < Top side view>
4.4< Port Definitions> ShenZhen FAB-CHAIN SERVICE Co. Ltd
5th Floor ,Bldg A,Chuang Jian Industrial Park,2028#,Song Bai Road,shiyan,BaoAn,ShenZhen,China
: A5/B4
Http://www.fab-chain.comPage 13 of 18

LED Electric quantity display Wireless charge 15W
Key switch

USB-A Output TYPE-C PD Input and Output

ShenZhen FAB-CHAIN SERVICE Co. Ltd
5th Floor ,Bldg A,Chuang Jian Industrial Park,2028#,Song Bai Road,shiyan,BaoAn,ShenZhen,China
: A5/B4
Http://www.fab-chain.comPage 14 of 18

5. PCB PCB and Board Connection PCB PCB Model :MSA10-A V1.0 MSA10-B V1.0 PCB PCB Sheet and Fire Grade FR4, 94V_0
MSA10-A V1.0
MSA10-B V1.0
ShenZhen FAB-CHAIN SERVICE Co. Ltd
5th Floor ,Bldg A,Chuang Jian Industrial Park,2028#,Song Bai Road,shiyan,BaoAn,ShenZhen,China
: A5/B4
Http://www.fab-chain.comPage 15 of 18

6. Electrical block diagram
7. Schematic diagram
8. Storage 3 5-3575%RH Long-term storage (more than 3 months) shall be placed in temperature for 5 to 35 , humidity environment for 75% RH or less. ShenZhen FAB-CHAIN SERVICE Co. Ltd
5th Floor ,Bldg A,Chuang Jian Industrial Park,2028#,Song Bai Road,shiyan,BaoAn,ShenZhen,China
: A5/B4
Http://www.fab-chain.comPage 16 of 18

3 1 The product should be charged once every 3 months during storage. 9. Matters needing attention
9.1 All electrical parameters shall not exceed the stipulated in this specification.
9.2 Prohibit open mobile power supply. PCBA Under no circumstances shall not remove the mobile power supply, more shall not remove the built-in PCBA and batteries, remove the mobile power can lead to internal short circuit, resulting in fire, batteries, summon up and other issues.
9.3 With sharp parts collision mobile power supply is prohibited.
9.4 It is prohibited to fall, impact, bending mobile power supply.
9.5 It is forbidden to move the power into the fire.
In any case, it may not burn mobile power or will move into the fire, otherwise it will cause internal batteries burning, may cause explosion, very dangerous, should be absolutely prohibited.
9.6 It is forbidden to mobile power immersed in a liquid.
The mobile power supply must not be immerse in any liquid, such as fresh water, sea water, beverage, gasoline and so on.
9.7 It is forbidden to mobile power placed in high temperature environment.
9.8 It is forbidden to mobile power discarded in ordinary tips.
9.9 To ban the use of damaged mobile power supply.
Mobile power supply in the process of transportation may be due to the impact of damage, if there is any abnormalities found mobile power supply, shall not be used, and should be far away from the fire source, the sun is high temperature occasion such as to avoid danger.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the
ShenZhen FAB-CHAIN SERVICE Co. Ltd
5th Floor ,Bldg A,Chuang Jian Industrial Park,2028#,Song Bai Road,shiyan,BaoAn,ShenZhen,China
: A5/B4
Http://www.fab-chain.comPage 17 of 18

user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
ShenZhen FAB-CHAIN SERVICE Co. Ltd
5th Floor ,Bldg A,Chuang Jian Industrial Park,2028#,Song Bai Road,shiyan,BaoAn,ShenZhen,China
: A5/B4
Http://www.fab-chain.comPage 18 of 18

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>