ViewSonic LS832WU Series DLP Projector User Guide
- June 12, 2024
- Viewsonic
Table of Contents
ViewSonic LS832WU Series DLP Projector User Guide
Quick Start Guide
Download Link
-
-
-
-
Mounting Screw: M4 x 10 (Max. L=10 mm) Unit: mm
-
16: 10 image on a 16: 10 screen
(e) = Screen
(f) = Center of Lens
(a) screen s ize | 16110 Image on a 16:10 Screen |
---|---|
(b) Projection | (¢} Image Height |
inch | mm |
80 | 2032 |
90 | 2286 |
100 | 2540 |
110 | 2794 |
120 | 3048 |
130 | 3302 |
140 | 3556 |
150 | 3810 |
160 | 4064 |
170 | 4318 |
Distance from the center of the lens to the rear of the projector: 262mm.
It is recommended that if you intend to permanently install the projector,
please
physically test the projection size and distance using the actual projector in
situ before you permanently install it.
FGC Compliance Statement
This device complies with part 15 of FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Industry Canada
ICES-003 Compliance: CAN ICES-003(B) / NMB-003(B) CE Conformity for European
Countries
C E The device complies with the EMC Directive 2014/30/EU, Low Voltage
Directive 2014/35/EU, Ecodesign Directive 2009/125/EC. The full Declaration of
Conformity can be found at the following website:
https://www.viewsonicglobal.com/public/products_download/safety_compliance/projector/VS19516_CE_DOC.pdf
Declaration of RoHS2 Compliance
This product has been designed and manufactured in compliance with Directive
2011/65/EU of the European Parliament and the Council on restriction of the
use of certain hazardous substances in electrical and electronic equipment
(RoHS2 Directive) and is deemed to comply with the maximum concentration
values issued by the European Technical Adaptation Committee (TAC).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>