Anker Innovations A3129 Soundcore Motion Boom Plus Portable Speaker User Manual

June 3, 2024
Anker Innovations

Anker LOGO

Innovations A3129 Soundcore Motion Boom Plus Portable Speaker
**User Manual

**

Model: A3129
51005003285 V01

Important Safety Information

  1. Please read this user manual carefully and save it for future reference.
  2. Do not place naked flame sources, such as lighted candles, on or near the product.
  3. Clean only with a dry cloth. Do not use any corrosive cleaner or oil.
  4. Do not install near any heat sources, such as radiators, heat registers, stoves, or other apparatus.
  5. Only use attachments/accessories specified by the manufacturer.
  6. Operating temperature should be between 0°C to 35°C/32°F to 95°F.
  7. Do not make unauthorized alterations to the product; doing so may compromise safety, regulatory compliance, system performance, and may void the warranty.
  8. Servicing is required when the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
  9. The product contains battery pack, so should not be exposed to excessive heat such as sunshine, fire or the like.

Notice
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

** This product complies with the radio interference requirements of the European Community.
Declaration of Conformity**
Hereby, Anker Innovations Limited declares that the product type A3129 is in compliance with Directives 2014/53/EU & 2011/65/EU and amendment (EU) 2015/863.
The full text of the EU declaration of conformity is available at the following internet address: https://www.soundcore.com Maximum output power: 13.03 dBm, Frequency band: 2.4G band (2.402GHz-2.480GHz)

This product complies with the radio interference requirements of the United Kingdom Declaration of Conformity. Hereby, Anker Innovations Limited declares that the product type A3129 is in compliance with Radio Equipment Regulations 2017(SI 2017/1206) . The full text of the UK declaration of conformity is available at the following internet address: https://www.soundcore.com/
For this device, body sar was performed with the device configured in the positions according to EN62209-2:2010, and body sar was performed with the device 0mm from the phantom.

The following importer is the responsible party (contact for EU and UK matters).
Anker Technology (UK) Limited GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom Anker Innovations Deutschland GmbH Georg-Muche- Strasse 3, 80807 Munich, Germany
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative
consequences for the environment and human health.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
FCC RF Exposure requirements: The highest SAR value reported under this standard during product certification for use next to the body with the minimum separation distance of 0mm. This transmitter must not be collocated or operated in conjunction with any other antenna or transmitter. This product is compliance to FCC RF Exposure requirements and refers to FCC website https://apps.fcc.gov/oetcf/eas/reports/ GenericSearch.cfm search for FCC ID: 2AOKB-A3129
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 (800) 988 7973

IC NOTICE TO CANADIAN USERS
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licenceexempt RSS(s).
Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This equipment should be installed and operated with minimum distance 0 mm between the radiator and your body.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

CAN ICES-003 (B) / NMB-003 (B)
This Class B digital apparatus complies with Canadian ICES-003 (Cet appareil numérique de la Classe B conforme à la norme NMB-003 du Canada).

Trademark

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited. is under license. Other trademarks and trade names are those of their respective owners.

* Additional Legal Rights for Consumers
For consumers, who are covered by consumer protection laws or regulations in their country of purchase or, if different, their country of residence, the benefits conferred by Soundcore’s Limited Warranty are in addition to all rights and remedies conveyed by such consumer protection laws and regulations, including but not limited to these
additional rights.
For FAQs and more information, please visit https://www.soundcore.com/.

© Anker Innovations Limited. All rights reserved. Soundcore and the Soundcore logo are trademarks of Anker Innovations Limited, registered in the United States and other countries.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals