Topmate KM9000 Wireless Keyboard and Mouse Instructions
- June 5, 2024
- Topmate
Table of Contents
Topmate KM9000 Wireless Keyboard and Mouse
Keyboard Parameters
- Dimension: (L)368mm(W)138mm(H)22mm
- Weight: 315t15g
- Button Resilience: 55+7gf
- Button Service Life: 1000 Million Time
- Power Requirement: 3V DC(Battery Powered)
- Working Current: 5MA
- Operating Conditions:
- Temperature: -10°C-50°C
- Humidity: Not Higher Than 85%RH
Mouse Parameters
- 2KEY+Scroll Wheel: 3D MOUSE
- Power Requirement 3V DC
- Button Operating Force: 80+20gf
- Switch Service Life: 5 Million Times
- Dimension: 112.82mm(L)57.23mm(W)22.41 mm(H)
- Operating Conditions:
- Temperature: -10°C-50°C
- Humidity: Not Higher than Than85%RH
- Sensor Copy Tracing Speed: 4500 times /sec
- Switch Operating Force: 70+10gf
- 3D Button Operating Force: 100+20gf
- Sensor racking Speed: 30 IPS
- weight: 65.6+10g
Keyboard Technical Features
- Low voltage alarm design.
- With advanced 2.4GHZ wireless technology, the using distance is up to 8-10M.
- Use two AAA batteries, the battery life is up to six months.
- The interior of the keyboard adopted a noise reduction design. The unique and advanced design of the water outlet prevents splashing.
- The material is wear-resistant and the characters are etched with radium engraving technology, which is durable, anti-striking, ergonomic, and comfortable to the touch.
- This keyboard is a 102 KEY (not including multimedia) membrane switch keyboard.
Mouse Technical Features
- Nano mini receiver, plug, and play.
- With advanced 2.4GHZ wireless technology, the using distance is up to 8-10M.
- Use two AAA batteries, with a power on/off switch.
- Superior 4-level intelligent power saving mode, which enables the battery Last for six months or even more.
- Adopting new generation photoelectric LG, 1 200DPI high precision optical tracking engine, one-button cycle adjustment 1200/1600.
- Hidden wireless receiver storage is built into the mouse, which is convenient to carry and can avoid the loss of the receiver.
Operating System
Windows XP, Windows ME, Vista, Windows7, Windows8, Windows10, Mac
Note:
Because of the open wireless, the 2.4GHz is highly susceptible to interference
codes that
cause the mouse to malfunction. If this problem occurs, follow these steps to
reconnect.
Keyboard:
- Turn off the receiver of the computer and put the receiver into the Computer
- Press ESC and= + buttons for 5 seconds at the same time.
- If the low light of the keyboard flashes quickly, that means the connection succeeds.
Mouse:
- Take down the receiver and the batteries from the computer.
- Put the receiver into the computer port and install the batteries into the mouse.
- Press on the right and left click buttons of the mouse and scroll the wheel for 10 seconds at the same time.
- If the bottom of the mouse lights up, the connection is successful.
Note:
If the first code is not successful, please repeat these steps.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed tO provide reasonable protection against harmful interference in a residential installation. The equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there Is no guarantee that interference will not occur in a particular installation. f this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution:
Any changes or modifications to this device not explicitly approved by the
manufacturer could void your authority to operate this equipment. This device
complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>