Shenzhen Chilong Industrial MX-382 Floor Light Instruction Manual

Shenzhen Chilong Industrial MX-382 Floor Light

POWER STATION INSTALL INSTRUCTION

1. SCREW
2. DC HOLE
3. NUT
4. DC WIRE

INSTALL STEP

1. PUT THE POWER SATION ON THE NUT
2. TWIST THE NUT(3) WITH SCREW(1)
3. CONNECT THE DC WIRE(4)WITH DC HOLD

OPERATION BY FLOOR LIGHT

ADJUST BRIGHTNESS

• One-click the + to increase brightness. it would have 10 levels of brightness.
• Hold press the + to increase brightness continuity. it would have 10 levels of brightness.
• One-click the – to reduce brightness, it would have 10 levels of brightness.
• Hold press – to reduce brightness continuity. it would have 10 levels of brightness.

ADJUST COLOR TEMPERATURE
One dick from 2700K-3500K-5500K-6500K to select the color temperature.

POWER OFF MEMORY FUNCTION
The intelligent LED light has a state memory function. When each light is adjusted to the appropriate color temperature and brightness, when the remote control or the ordinary wall a switch is turned off and on again, the state of the light is the state before the last time the light was turned off.

POWER STATION INSTRUCTION

1. Build in5V-1A wireless charging function, put device on the power station plate centre to activate.
2. Build-in 5V-2A output charging. connect device to charging.

OPERATIONAL BY REMOTE CONTROL

1. PAIR
   The remote control needs to be coded before it can be used. The method is as follows:
   The for light connects to the power supply, hold press the of the remote control at the same time, after the light blink 1 times the setting finish.

2. ADJUST BRIGHTNES

   • One-click the to increase brightness. it would behave 10 levels of brightness.
   • Hold press the to increase brightness continuity. it would have 10 levels of brightness.
   • One click to reduce brightness,it would have 10 levels of brightness.
   • Hold press the to reduce brightness continuity .it would have 10 levels of brightness.

3. ADJUST COLOR TEMPERATURE
   One-click 2700K- 3500K 5500K 6500K to select color
   temperature.

4. SETTING TIME TO TRUN OFF LIGHT
   The 60s OFF setting after 60 seconds to turn off floor light: 1s OFF setting after 1 hour to turn off floor light.

5. EXPRESS MODE SETTING
   S1, S2, S3 there can be setting 3 express modes, the method as follows:
   Choose the brightness and color temperature as you want, hold press any express mode button of remote control 2-3 second, after the floor blink, 1 time finish the setting.

6. POWER OFF MEMORY FUNCTION
   The intelligent LED light has a state memory function. When each light is adjusted to the appropriate color temperature and brightness, when the remote control or the ordinary wall the switch is turned off and on again, the state of the light is the state before the last time the light was turned off.

SMART HOME OPERATION

Software User Manual for 10S APP installation instructions:
Method 1: Search Magic Home Pro in “APP Store” .Click the below link and download the app. http://fir.magichue.net/8d6a

Method 2: Download the APP by scanning the below QR code for free.

Installation details as below 

Software User Manual for Android.
APP installation instructions
Method 1 : Search Magic Home Pro in “Google Play Store” or from browsers. Installation details as follow.

Method 2: Download the APP by scanning the below QR code for free .

Installation details as below 

Instructions

There are three different ways to connect the controller after it has been connected to the power supply.

• Wi-Fi mode: This mode needs to register and log in after complete 1 to 1 Mode.(Please refer to connection mode c ) Make sure the controller has been powered and never been set, please operate as below steps.

  1. Click “+” in the upper right corner and click “Connect light to Wi-Fi network”
  2. Register and login account
  3. Connect the device to the router

• Remote control via Internet:
  Here you can locate the Wi-Fi controller via the internet from anywhere in the world In Wi-Fi mode (connect mode(a)). Keep the Wi-Fi router online, no matter where you are you still can control your lights with APP as long as there’s Wi-Fi/3G/4G internet for your smartphone. 

• 1 to 1 Mode: Open mobile Wi-Fi network signal, find “LEDnet*”signal and connect, then open Magic Home Pro APP.

Step 1: Create your Magic Home cloud account
In order to control your smart light with the Google Assistant or control them remotely, you need to create a Magic Home could account and sign in.

Step 2: Add your light and modify the name
Make sure there is at least one smart light in device list, and enable your lights for remote control. On “Home” page, Long press the light to rename.

Step 3: Add Home Control Action
Click “Home control’on”Home”‘APP. Select “Magic Home WiFIr The account and password must be same as the one you created in Magic Home Pro APP.

Step 4: Log in with your app account
Enter your app account and password to finish the account linking. (Use the Magic Home cloud account you used on step 1). Your lights will be listed on Home Control’interface

Step 5: Control your light
Here, you finish all setups. You can now control your lights by issuing voice commands.

Supported Commands
Say “Ok Google” or “Hey Google”, then.. Turn on Turn on/off all the lights

WORKS WITH amazon Alexa

Step 1: Create your Magic Home cloud account
In order to control your smart light with the Amazon Echo or control them remotely, you need to create a Magic Home cloud account and sign in.

Step 2: Add your light and modify the name
Make sure there is at least one smart light in device list, and enable your lights for remote control. On “Home” page, long press light to rename.

Step 3: Enable Alexa Skill
The next step is to download the Amazon Alexa app, open the Amazon Alexa app and under the skills section, search for the “Magic Home” skill. The ccount and password must be same as you created in Magic Home Pro APP.

Step 4: Login and Discover Devices
Use your Magic Home cloud account you created in step 1 to sign in to “Magic Home” Skill.
The next step is to discover your smart lights from Alexa app. You can say “Alexa, discover devices”
Once Alexa has completed discovering your smart lights, they will be shown in the Smart Home section in Alexa app.

Step 5: Control your light
Here, you finish all setups. You can now control your lights by issuing voice commands.

Supported Commands:
These are some of the currently supported Alexa voice commands for the smart light. Alexa, turn [light name] on/off

Reset

If you want to reset the device, should be operating as follow
STEP 1. power off the device

STEP 2. connect power and cut off it 3 times(even operation should be more than 2 seconds)

Share

If you want to share the device to other people,the operation is as follows STEP 1. Open Device Settings in APP, and click the device you are currently using to enable remote Settings.

STEP 2. Go to Device Infomation and click Share Device. Add a share and enter the email address for the share

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful nterference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

For BTWIFI:
To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm from the radiator of your body: Use only the supplied antenna.

For WPT
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
During the operation of the device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
FCC ID: 2A6FR-3282

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>