ZKI PBB-2003S Umbrella Light with Speaker Instruction Manual
- June 3, 2024
- ZKI
Table of Contents
PBB-2003S Umbrella Light with Speaker
Instruction Manual
PRODUCT NAME: Umbrella Light with Speaker(twins paring system)
ITEM NUMBER: PBB-2003S
PARTS:
Check to make sure you have the following: INCLUDED:
- Portable LED Speaker Ice Bucket X 1
- USB Charging Cable X 1
- User Manual X 1
Specification:
- Material: ABS plastic
- Water resistance of LED lights: IP44
- Where to use: under umbrella
- Light battery: Li-Ion battery(xl ,Built-in,non-replaceable)
- Bluetooth version: 5.0
- output voltage: 3.7V-4.2V
- Output power: 45MM, 3Wx2
- Input: 5.0V Speakers: 4 V 3W – Product size: 205X205X35mm
- Bluetooth operating distance: 10m (32.8ft)
- Frequency response: 20HZ-20KHZ
- Distortion:5.1.-1.1%
- Charging time: 4 — 8 hours
- Working time: play music(6 hours), play music and lighting(3hours)
- Perfectly adaptable to the size of your parasol White light and multi-colored RGB light Stream great music wirelessly
Function:
- Color change
- with Bluetooth Speaker
- rechargeable ,convenient for charging by USB cable
- with paring function, any 2 of table speaker can be paired and control by 1 mobile
WARNINGS AND CAUTIONS
CAUTION: The built-in rechargeable battery is not replaceable. Do not
remove or replace it,do not throw it in the trash or in a fire. Do not dispose
device in the standard garbage disposal sites. Dispose of the device at
available Battery Recycling sites after fully discharging battery. Not doing
so may violate local disposal laws and regulations. Please refer to local
regulations for proper battery disposal.
WARNING:
- Keep the USB Cable out of reach of children.
- Alever attempt to open the light bottom .
These products and their packaging are not toys; please keep out of reach of children.
- Disconnect the USB Cable Cable from mains power when not in use.
- Do not stand or jump on this product.
- Do not use this product if it is cracked or damaged.
- Keep the product away from chemicals and heat,Do not attempt to open the product.
**Never charge this product outdoors.
Operating by “On/Off ” button on the bottom
-
Press to turn the light & Bluetooth ON or off. Functions:
1. The device is switched on / off by long pressing the S-Power button.
2. Briefly press the LED button to switch on the LED mode.
3. Double click the LED button to switch to TVVS mode Bluetooth synchronization: Turn on the speaker and select Bluetooth mode. Find the Bluetooth settings on your smart phone, tablet or other Bluetooth audio device and select “UUFFOO”. Enter the sync code 0000 (some devices do not need it) to connect the speakers. The speaker confirms that the synchronization was successful. -
BATTERY CHARGING
Before the product is used charge the battery for 6 to 8 hours by:
Charge the light with provided USB cable which is compatible with any computer Or cel phone SVolt out put charger
Connect the USB cable to computer USB port
Insert the USB cable to Micro jack of lamp
Monitoring the charging indicator light (it will turn to green when it is fully charged)
Covering the charge cap after it is fully charge
CONNECTING VIA BLUETOOTH:
Make sure the led BT speaker is powered On before connecting your device.
- To turn on the ON/OFF Button, light and Bluetooth are open at the same time.there will be an audible activation beep once in Bluetooth Pairing Mode.Bluetooth indicator keep flashing in Blue.
- To turn on the Bluetooth of your mobile phone, select “UUFFOO” from your device’s Bluetooth Setting Menu. Another audible beep will sound once your device is connected.
- 2 ways to disconnect your Bluetooth Device, to turn of the Bluetooth switch of your mobile phone,there will be an audible deactivation beep indicating that the device has been disconnected from Bluetooth Mode. or directly turn of you item.
Remark: Bluetooth will be off automatically if not being connected within 20mins,product into power saving mode.
TO PAIR 2 SPEAKERS
(make 2 of speakers paired first before opening your Bluetooth device, than
open the Bluetooth device and connect it with speaker)
2.1. First time to pair 2 speakers.
- Turn on any 2 of speaker by shortly press on/off button
- Double click ON/OFF button from any one of the speaker after both were turned on,there will be one beep notice.then it is able to hands off.
- Since paired successfully,also will be beep notice.
- Now you can connect your Bluetooth device(Mobile) to the speakers via Bluetooth
Care and maintenance
- Always TURN OFF the light after use.
- for battery, Operation Temperature
Charge : 0-45°C (Charge at a very low temperature such as blew Ot,will be get
a lower capacity and reduce cycle life of the battery)
Storage temperature for a long time : 0-25°C
Do not storage exceed half year, Must charge once when storage for three
months.
EVATOST CONSULTING LTD
Suite 11, First Floor, Moy Road Business
Centre, Taffs Well, Cardiff, Wales, CF15 7QR
contact@evatmaster.com
eVatmaster Consulting GmbH
Bettinastr. 30
60325 Frankfurt am Main,Germany
contact@evatmaster.com
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled enviroment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
POWERBEAUTY(DONGGUAN)INDUSTRIAL CO.,LTD
ADD: NO.1, Eastern Industry Park, Shujiu Village,
Changping Town, Dongguan City,
Guangdong Province, China (PC:523380)