DELTACO GAMING GAM-120 Wireless Gaming Mouse User Manual

DELTACO GAMING GAM-120 Wireless Gaming Mouse

Product Information

GAM-120 Wireless Gaming Mouse
The GAM-120 is a wireless gaming mouse that has 7 buttons for various functions. It has 3 modes: 2.4 GHz wireless mode, Bluetooth mode, and power- off mode. It has a DPI button to change the DPI settings, and the default DPI settings are 400/800/1600/2400/4800. The corresponding colors are: red/green/blue/purple/yellow. The mouse can be charged by connecting it to a computer using a USB cable. The LED light indicates the charging status, and it turns green when the mouse is fully charged.

Product Usage Instructions

1. Power On/Off: Underneath the mouse, there is a power switch. You can change between 3 modes by switching the button to the left, center, or right. Left = 2.4 GHz wireless mode. Center = Power off. Right = Bluetooth mode.

2. Button Functions:

   • Left button (1)
   • Right button (2)
   • Mouse wheel and button (3)
   • Forward button (4)
   • Backward button (5)
   • DPI button (6)
   • LED mode button (7)

3. Charging: Connect the mouse to a computer using the USB cable to charge. The LED light indicates the charging status, and it turns green when the mouse is fully charged.

4. DPI Settings: Use the DPI button (6) to change the DPI settings. The default DPI settings are: 400/800/1600/2400/4800. The corresponding colors are: red/green/blue/purple/yellow. Customize the DPI settings by using the software that can be downloaded at www.deltacogaming.com. When the DPI is changed in wireless mode, the LED changes color to confirm the change. When the DPI is changed in wired mode, the LED flashes 3 times to confirm the change and then changes to show the charge status.

5. LED Light: When you change DPI, there is a corresponding LED that changes color. The LED color for each DPI setting can be changed by using the software that can be downloaded at www.deltacogaming.com. Press the LED mode button (7) to cycle through different LED modes. The last LED mode turns off the LEDs.

6. USB Polling Rate: The default polling rate is set at 1000 Hz. You can adjust the polling rate in 4 steps: 125/250/500/1000 Hz. 2.4 GHz wireless = 1000 Hz polling rate (recommended for gaming). Bluetooth = 125 Hz polling rate. To change the polling rate, use our software.

7. Cleaning: Clean the product by using a dry cloth.

8. Safety Instructions:

   • Keep the product dry. Keep it away from all liquids.

   • Do not open up or try to repair the product by yourself.

   • Keep the product and packaging out of reach of children to
     prevent accidents and choke hazards.

   • Do not drop or expose to shock damage.

9. Warranty: Please see www.deltaco.eu for warranty information.

10. Support: More product information can be found at www.deltaco.eu. Contact us by e-mail: help@deltaco.eu.

Overview

1. Left button
2. Right button
3. Mouse wheel and button
4. Forward button
5. Backward button
6. DPI button
7. LED mode button

Connect

Use the power switch to change between modes. 2.4 GHz wireless mode: flip the switch to the left and press and hold left, right, and middle buttons for 3 seconds. The logo LED confirms by flashing yellow. Connect the USB receiver to a USB-A port on your computer. The LED stops flashing to confirm. The mouse will automatically connect to your computer wirelessly. If you have connected previously the mouse will remember the connection.

Bluetooth mode:
flip the switch to the right and press and hold left, right, and middle buttons for 3 seconds. The logo LED confirms by flashing blue fast. You can now connect with a device that supports Bluetooth, for example, your phone.

Wired (cable) mode:
Wired mode is enabled automatically if you connect a USB cable. The mouse will charge and can be used at the same time.

Notes on Bluetooth:
The LED may flash blue slowly indicating trouble with the connection. If you have any trouble with the connection, try to remove/forget the connection on your device and make a new connection. It might also help if you restart your device.

Charge

To charge the mouse, connect it with a USB cable to a computer. Charging: The LED is red. Fully charged: the LED is green.

Power switch

On the underneath of the mouse there is a power switch. You can change between 3 modes. Left, center or right.

LED mode button

Press the LED mode button to cycle through different LED modes. The last LED mode turns off the LEDs.

DPI

• Use the DPI button to change the DPI. The default DPI settings are: 400/800/1600/2400/4800.
• The corresponding colours are: red/green/blue/purple/yellow.
• Customize the DPI settings by using our software.

When the DPI is changed in wireless mode, the LED changes color to confirm the change. When the DPI is changed in wired mode, the LED flashes 3 times to confirm the change, and then changes to show charge status.

USB polling rate

The default polling rate is set on 1000 Hz. You can adjust the polling rate in 4 steps. 125/250/500/1000 Hz. 2.4Ghz wireless = 1000 Hz polling rate (recommended for gaming). Bluetooth = 125 Hz polling rate. To change the polling rate, use our software.

LED light

When you change DPI, there is a corresponding LED that changes color. The LED color for each DPI setting can be changed, by using our software.

Cleaning

Clean the product by using a dry cloth.

Safety instructions

1. Keep the product dry. Keep it away from all liquids.
2. Do not open up or try to repair the product by yourself.
3. Keep the product and packaging out of reach of children to prevent accidents and choke hazards.
4. Do not drop or expose to shock damage.

Warranty

Please, see www.deltaco.eu for warranty information.

Support

• More product information can be found at www.deltaco.eu.
• Contact us by e-mail: help@deltaco.eu.

Software

Download the software at www.deltacogaming.com.

Disposal of electric and electronic devices EC Directive 2012/19/EU This product is not to be treated as regular household waste but must be returned to a collection point for recycling electric and electronic devices. Further information is available from your municipality, your municipality’s waste disposal services, or the retailer where you purchased your product.

SIMPLIFIED EU DECLARATION OF CONFORMITY

The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows: Hereby, DistIT Services AB declares that the radio equipment type wireless device is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: All DoCs can be found on the product’s specific website, to access it go to: https://www.deltaco.se/produkter/xx (just change xx to the article number, for example, https://www.deltaco.se/produkter/TWS-111) Then click on the tab “Info/Certifikat”.

FREE SUPPORT

• help@deltaco.eu
• help@deltaco.se (0200-877771)
• info@deltaco.fi (020 712 0390)
• help@deltaco.dk
• help@deltaco.no.

www.deltacogaming.com / Made in China.
DistIT Services AB, Glasfibergatan 8, 125 45 Älvsjö, Sweden.

References

• Aurdel - Distribuerer den allernyeste og bedste teknologi
• deltaco.eu
• DELTACO GAMING | Homepage
• Aurdel - Distributør av den nyeste og beste teknologien
• Aurdel - Distributør av den nyeste og beste teknologien
• deltaco.se/
• Alla produkter
• deltaco.se/produkter/TWS-
• STREETZ Trådlösa in-ear hörlurar med laddningetui, BT 5, TWS, vit
• deltaco.se/produkter/xx

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>