Shenzhen Chilong Industrial MX-3281 Smart Floor Lamp Instruction Manual

Shenzhen Chilong Industrial MX-3281 Smart Floor Lamp

OPERATION BY FLOOR LIGHT

ADJUST BRIGHTNESS

• One click the to increase brightness.it would be have 10 levels brightness.
• Hold press the to increase brightness continuity. it would have 10 levels brightness.
• One click the to reduce brightness, it would be have 10 levels brightness.
• Hold press the to reduce brightness continuity. it would have 10 levels brightness.

ADJUST COLOR TEMPERATURE

One click from 2700K-3500K-5500K-6500K to select the color temperature.

POWER OFF MEMORY FUNCTION

The intellicent LED light has a state memery function. When each light is adiusted to the appropriate color temperature and brightness, when the remote control or the ordinary wall switch is turned off and on again, the state of the light is the state before the last time the light was turned off .

OPERATIONL BY REMOTE CONTROL

PAIR

The remote control needs to be coded before it can be used. The method is as follows:
The floor light connect to power supply, hold press the of the remote control at the same time, after the light blink 1 times the setting finish.

ADJUST BRIGHTNESS

• One click the to increase brightness.it would be have 10 levels brightness.
• Hold press the  to increase brightness continuity. it would have 10 levels brightness.
• One click the to reduce brightness.it would be have 10 levels brightness.
• Hold press the to reduce brightness continuity .it would have 1 O levels brightness.

ADJUST COLOR TEMPERATURE

One click  2700K – 3500K – 5500K – 6500K to select color
temperature.

SETTING TIME TO TRUN OFF LIGHT

setting after 60 second to tum off floor light; setting after 1 hours to turn off floor light.

EXPRESS MODE SETTING

there can be setting 3 express mode, the method as follows: Choose the brightness and color temperature as you want, hold press any express mode button of remote control 2-3 second.after floor blink 1 times finish the setting.

POWER OFF MEMORY FUNCTION

The intellicent LED light has a state memery function. When each light is adiusted to the appropriate color temperature and brightness, when the remote control or the ordinary wall switch is turned off and on again, the state of the light is the state before the last time the light was turned off.

SMART HOME OPERATION

Software User Manual for 10S APP installation instructions:

Method 1 · search Magic Home Pro In “APP store· .Orel I ck the bellow link and download lhe app. http;//fir,megichue.netf8d6a

Method 2: Download the APP by scanning the below QR code for free.

Installation details as below

Software User Manual for Android.
APP installation instructions:
Method 1: search Magic Homa Pro In “Google Play Store· or from broWsers.lnstallallon details as follow.

Method 2: Download the APP by scanning the below QR code for free

Installation details as below

Instructions

There are three different ways to connect the controller after it has been connected to the power supply.

a) Wt-Fi mode: This mode needs register and login after complete 1 to 1
Mode.(Please refer to connection mode c) Make sure the controller has been powered and never been set, please operate as below steps.
b) 1.Click “+” in the upper right oomer and click “Connect light to Wi-Fi network”

2.Register and login aooounl

3.Connect the device to the router


c) Remote control via Internet:
Here you can locate the Wi-Fi controller via ltle internet from anywt,ere in tile world
In WI-Fl mode (connect mode(a).Keep the WI-Fl router onllne, no matter where you are ,you sdll can control your lights with APP as long as there’s WI- Fl/3G/4G internet for your smi.ulphone.

d) 1 to 1 Mode: Open mobile Wi-Fi network signal, find “LEDnel” …. “signal and connect, then open Magic Home Pro APP.

If the network connect successfully you can enter the APP for operation

Step 1: Create your Magic Home cloud account
In order to control your smart light with the Google Assist.int or control them reme>lely you need lo craala a Magic Homa cloud account and sign in.

Step 2: Add your Ilg ht and modify lhe name
Make sure there Is at laast ona smart light In davlce list, and enable your llghls for ramota control. On “Home” paga, long prass the light to ranama.

Step 3: Add Home Control Action
Click ‘Home contml”on”Home”APP_ Salect “Megic, Home WiFi” The ea:ount end password must be same as the one you created In Magic Home Pro APP.

Step 4: Login wllh your app account
Enter your app account and password to finish the account linking. (Use the Magic Home cloud account you uaed on step 1 ). Your lights will be listed on “Home Control “interface .

Step 5: Control your light
Here, you finish all selups. You cen now control your liglhls by issuing voioe commands
Supported Commands·
Say “Ok Google” or “Hey Google”, than ..
Tum on
Tum onfoff all the lights

Step 1: Create your Magic Home doud eccoont
In order to control your smart light with the Amazon Echo or control them remotely, you need to create a Magic Home cloud account and sign In.

Step 2: Add your light and modify U,e name
Make aure there is at least one smarl light in devioa liat, and enable your lights for remote control. On “Hom” long pmss light to mnarne,

S1ep 3: Enable Alexa Skill
Tha next slap is to download the Amazon Alexa app, open the Amazon Alexa aw and under the skills irectlon. search for the “Magic Home” skill. The account and password must be same as you cruated in Magic Home Pro APP

Step 4: Login and Discover Devices
Use your Magic Home cloud account you ereated in step 1 to sign in to “Magic Home” Skill
Toa next slap is to discover your smart lights from Alexa app. You can say “Alexa. discover devioes”.
OnooAlaxa has oomplated discovering your smart lights, they will be shown in Iha Smart Homa section in Alexa app.

Step 5: Control your light
Here, you nnlsh all s&tups. Yoo can now control your lights by 188ulng voice commands.
Supported Commands
These are some of the currenUy supported Alexa voice commands for the smart light. Ale,xa, tum PiQhl name] on/off

FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. FCC ID: 2A6FR-3281

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>