rfsolutions RIOT-SYSTEMP-8S5 Temperature Monitoring System User Guide
- June 5, 2024
- rfsolutions
Table of Contents
RIOT-SYSTEMP-8S5 Temperature Monitoring System
RIoT-MINIHUB CONTROL
Simplified Declaration of Conformity (RED)
BG – RF Solutions Limited , 2014/53/. : www.rfsolutions.co.uk CS -Tímto RF
Solutions Limited prohlasuje, ze typ rádiového zaízení definované v tomto
dokumentu je v souladu se smrnicí 2014/53/EU. Úplné znní EU prohlásení o shod
je k dispozici na této internetové adrese: www.rfsolutions.co.uk DA – Hermed
erklærer RF Solutions Limited , at radioudstyrstypen defineret i dette
dokument er i overensstemmelse med direktiv 2014/53/EU.
EUoverensstemmelseserklæringens fulde tekst kan findes på følgende
internetadresse: www.rfsolutions.co.uk DE – Hiermit erklärt RF Solutions
Limited , dass der Funkanlagentyp in diesem Dokument definiert der Richtlinie
2014/53/EU entspricht. Der vollständige Text der EU-Konformitätserklärung ist
unter der folgenden Internetadresse verfügbar: www.rfsolutions.co.uk EL – / RF
Solutions Limited , 2014/53/. : www.rfsolutions.co.uk EN – Hereby, RF
Solutions Limited declares that the radio equipment type defined within this
document is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
www.rfsolutions.co.uk ES – Por la presente, RF Solutions Limited declara que
el tipo de equipo radioeléctrico definido dentro de este documento es conforme
con la Directiva 2014/53/UE. El texto completo de la declaración UE de
conformidad está disponible en la dirección Internet siguiente:
www.rfsolutions.co.uk ET -Käesolevaga deklareerib RF Solutions Limited , et
käesolev raadioseadme tüüp määratletud selles dokumendis vastab direktiivi
2014/53/EL nõuetele. ELi vastavusdeklaratsiooni täielik tekst on kättesaadav
järgmisel internetiaadressil: www.rfsolutions.co.uk FI -RF Solutions Limited
vakuuttaa, että radiolaitetyyppi määratletud selles dokumendis on direktiivin
2014/53/EU mukainen. EU vaatimustenmukaisuusvakuutuksen täysimittainen teksti
on saatavilla seuraavassa internetosoitteessa: www.rfsolutions.co.uk FR – Le
soussigné, RF Solutions Limited , déclare que l’équipement radioélectrique du
type défini dans ce document est conforme à la directive 2014/53/UE. Le texte
complet de la déclaration UE de conformité est disponible à l’adresse internet
suivante: www.rfsolutions.co.uk HR – RF Solutions Limited ovime izjavljuje da
je radijska oprema tipa definirani u ovom dokumentu u skladu s Direktivom
2014/53/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedeoj
internetskoj adresi: www.rfsolutions.co.uk HU – RF Solutions Limited igazolja,
hogy a dokumentumban meghatározottak szerint típusú rádióberendezés megfelel a
2014/53/EU irányelvnek. Az EUmegfelelségi nyilatkozat teljes szövege elérhet a
következ internetes címen: www.rfsolutions.co.uk IT – Il fabbricante, RF
Solutions Limited , dichiara che il tipo di apparecchiatura radio definito
all’interno di questo documento è conforme alla direttiva 2014/53/UE. Il testo
completo della dichiarazione di conformità UE è disponibile al seguente
indirizzo Internet: www.rfsoluti ons.co.uk LT – As, RF Solutions Limited ,
patvirtinu, kad radijo rengini tipas apibrzta siame dokumente atitinka
Direktyv 2014/53/ES. Visas ES atitikties deklaracijos tekstas prieinamas siuo
interneto adresu: www.rfsolutions.co.uk LV – Ar so RF Solutions Limited
deklar, ka radioiekrta kas defints saj dokument atbilst Direktvai 2014/53/ES.
Pilns ES atbilstbas deklarcijas teksts ir pieejams sd interneta vietn:
www.rfsolutions.co.uk MT – B’dan, RF Solutions Limited , niddikjara li dan it-
tip ta’ tagmir tar-radju definit f’dan id-dokument huwa konformi mad-Direttiva
2014/53/UE. Ittest kollu tad-dikjarazzjoni ta’ konformità tal-UE huwa
disponibbli f’dan l-indirizz tal-Internet li ej: www.rfsolutions.co.uk NL –
Hierbij verklaar ik, RF Solutions Limited , dat het type radioapparatuur
gedefinieerd in dit document conform is met Richtlijn 2014/53/EU. De volledige
tekst van de EU-conformiteitsverklaring kan worden geraadpleegd op het
volgende internetadres: www.rfsolutions.co.uk PL – RF Solutions Limited
niniejszym owiadcza, e typ urzdzenia radiowego zdefiniowane w tym dokumencie
jest zgodny z dyrektyw 2014/53/UE. Pelny tekst deklaracji zgodnoci UE jest
dostpny pod nastpujcym adresem internetowym: www.rfsolutions.co.uk PT – O(a)
abaixo assinado(a) RF Solutions Limited declara que o presente tipo de
equipamento de rádio definido neste documento est á em conformidade com a
Diretiva 2014/53/UE. O texto integral da declaração de conformidade está
disponível no seguinte endereço de Internet: www.rfsolutions.co.uk RO – Prin
prezenta, RF Solutions Limited declar c tipul de echipamente radio definit în
acest document este în conformitate cu Directiva 2014/53/ UE. Textul integral
al declaraiei UE de conformitate este disponibil la urmtoarea adres internet:
www.rfsolutions.co.uk SK – RF Solutions Limited týmto vyhlasuje, ze rádiové
zariadenie typu definované v tomto dokumente je v súlade so smernicou
2014/53/EÚ. Úplné EÚ vyhlásenie o zhode je k dispozícii na tejto internetovej
adrese: www.rfsolutions.co.uk SL – RF Solutions Limited potrjuje, da je tip
radijske opreme opredeljeno v tem dokumentu skladen z Direktivo 2014/53/EU.
Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem
naslovu: www.rfsolutions.co.uk SV – Härmed försäkrar RF Solutions Limited att
denna typ av radioutrustning definieras i detta dokument överensstämmer med
direktiv 2014/53/EU. Den fullständiga texten till EU-försäkran om
överensstämmelse finns på följande webbadress: www.rfsolutions.co.uk
RF Solutions Ltd. Recycling Notice
Waste Batteries and Accumulators Directive 2006/66/EC
Meets the following EC Directives: DO NOT Discard with normal waste, please recycle. ROHS Directive 2011/65/EU and amendment 2015/863/EU Specifies certain limits for hazardous substances. WEEE Directive 2012/19/EU
Where batteries are fitted, before recycling the product, the batteries must be removed and disposed of at a licensed collection point. RF Solutions battery producer number: BPRN00060.
Waste electrical & electronic equipment. This product must be disposed of through a
licensed WEEE collection point. RF Solutions Ltd., fulfils its WEEE obligations by membership of an approved compliance schem e. Environment agency
number: WEE/JB0104WV.
Disclaimer: Whilst the information in this document is believed to be correct at the time of issue, RF Solutions Ltd does not accept any liability whatsoever for its accuracy, adequacy or completeness. No express or implied warranty or representation is given relating to the information contained in this document. RF Solutions Ltd reserves the right to make changes and improvements to the product(s) described herein without notice. Buyers and other users should determine for themselves the suitability of any such information or products for their own particular requiremen ts or specification(s). RF Solutions Ltd shall not be liable for any loss or damage caused as a result of user’s own determination of how to deploy or use RF Solutions Ltd’s products. Use of RF Solutions Ltd products or components in life support and/or safety applications is not authorised except with express written approval. No licences are created, implicitly or otherwise, under any of RF Solutions Ltd’s intellectual property rights. Liability for loss or damage resulting or caused by reliance on the information contained herein or from the use of the product (including liability resul ting from negligence or where RF Solutions Ltd was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict RF Solutions Ltd’s liability for death or personal injury resulting from its negligence.
RIoT REMOTE CONTROL
Quick Start Guide
Configuring a RIoT CONTROL System
Monitor and Control RF Receivers from your Smart Device/PC
Follow this procedure to: · Setup your Smart device to display the status of
RF Receiver Outputs
from Anywhere. · Setup your Smart Device to control RF Receiver outputs from
Anywhere
QS-MINIHUB-CONTROL-2
RIoT-MINIHUB CONTROL
RIoT-MINIHUB CONTROL
BLANK PAGE
BLANK PAGE
QS-MINIHUB-CONTROL-2
Page: 2
QS-MINIHUB-CONTROL-2
Page: 11
RIoT-MINIHUB CONTROL
BLANK PAGE
QS-MINIHUB-CONTROL-2
Page: 10
RIoT-MINIHUB CONTROL
RIoT-MINIHUB Setup
1. Connect the Antenna 2. Connect the USB Cable to a USB power source Once
completed you can then configure your application
Rear Panel
SETUP USB
Connect USB power
Connect RF Antenna
RIoT-MINIHUB Status
Throughout setup the RED Data LED on the front panel provides ALL feedback and
status information! Please be patient when configuring, with Wi-Fi, it can
take up to 30 seconds for a confirmation or reset to complete!
Data LED ON
Operating Mode Normal
Description RIoT-MINIHUB is connected to Wi-Fi
1x Flash/ Blink
RF Receive
RIoT-MINIHUB has received a signal from a paired RF Receiver
2x Flash
Setup Mode
3x Flash
Learn Mode
4x Flash 5x Flash
Wi-Fi Error Webservice Error
In Setup Mode
RIoT-MINIHUB is ready to Learn an RF Receiver
No Wi-Fi Connection Cannot connect via Internet
Factory reset
1. Press and hold RIoT-MINIHUB Setup Switch, then apply power 2. Wait for the
Data LED to flash at high speed (~5sec) 3. Release the Setup Switch RIoT-
MINIHUB is restored to factory default.
QS-MINIHUB-CONTROL-2
Page: 3
RIoT-MINIHUB CONTROL
Setup Procedure: Before you Start
You need a Smartphone / Tablet or Smart device connected to your local Wi-Fi
Download & Install the following Apps from the App Store:
You now need to complete the following Tasks
Stage 1 2 3 4
Description Configure RIoT-MINIHUB to Login to your local Wi-Fi
Pair your Smart device with RIoT-MINIHUB Pair an RF Receiver with RIoT-MINIHUB
Pair your Smart device to the RF Receiver
RIoT-MINIHUB CONTROL
5. From the Home Screen you can now use Your Smart Device the same as a
standard RF Remote Transmitter.
6. You can now Pair together any of the Smart Device App Buttons to any
Receiver Output, using the standard Receiver Pairing process. Please refer to
the RF Receiver Quickstart for this process.
When this pairing is completed you will receive feedback from the RF Receiver
to show the status of the outputs. Green Dot = Output Activated Red Dot =
Output relaxed Yellow Dot = Output not Acknowledged
You can now control your RF Receiver(s) outputs by pressing the App buttons
You can also change the Handset Type, Turn Acknowledgement ON or OFF. Many App
Buttons, or Remote Transmitters can be learnt to the same RF Receiver, the
limit is set by the Receiver Type.
QS-MINIHUB-CONTROL-2
Page: 4
QS-MINIHUB-CONTROL-2
Page: 9
RIoT-MINIHUB CONTROL
Stage 4
Pair an RF Receiver to Your Smart Device
In this stage you will pair a Receiver to your Smart Device app so the Receiver can Transmit its Outputs status to your Smart Device App Buttons. Then Pair your Smart Device Buttons to your chosen RF Receiver Output Relays.
1. On your Smart device, open the CONTROL App
2. In home screen, from the menu select “Add New Receiver”
RIoT-MINIHUB CONTROL
Stage 1
Configure RIoT-MINIHUB to your local Wi-Fi Using the RIoT MINIHUB Wi-Fi Wizard
App
And a Smart device
1. Press and hold the SETUP Switch on the RIoT-MINIHUB until the DATA LED on
the front panel stays ON. (takes ~ 5 seconds)
2. Release the SETUP Switch 3. The Data LED will now Flash 2X. RIoT-MINIHUB
is now broadcasting its
own Wi-Fi SSID 4. On your Smart device run the Wi-Fi Wizard App 5. RIoT-
MINIHUB SSID will appear on the Smart device app 6. Select “MHXXXX” and
“Connect” to open the Wi-Fi Setup page.
3. On the RF Receiver Briefly Press the “LEARN Switch” (or present a Magnet
depending on your receiver) so that it transmits a LEARN signal
4. Press “OK” to confirm
Learn
Complete the Table : 7. Select your local Wi-Fi network and enter Wi-Fi
Password 8. Press “set” and “Reboot” 9. After reboot (allow 30 seconds), the
RIoT-
MINIHUB will login to the local Wi-Fi and the LED will illuminate 10. Check
the Red Data LED is on constantly, indicating that RIoT-MINIHUB is registered
on the local Wi-Fi
Exit from the App and proceed to Stage 2
QS-MINIHUB-CONTROL-2
Page: 8
QS-MINIHUB-CONTROL-2
Page: 5
RIoT-MINIHUB CONTROL
Stage 2
Pair your Smart Device with RIoT-MINIHUB
1. Run the CONTROL App
2. Select Menu, Add New Hub
3. Your Smart device is now ready to pair with the RIoT-MINIHUB
4. On the RIoT-MINIHUB briefly press and release the Setup Switch,
(RIoTMINIHUB transmits a Learn Signal, The Data LED switches off briefly)
5. Control APP will show “Hub Detected”
6. Select, Yes
7. Your SMARTDEVICE is now paired with the RIoT-MINIHUB
8. Select OK to Exit the Hub Setup
Note: PROFILES RIoT Control App can operate with Multiple RIoTMINIHUB’s
located in different locations. In order to differentiate, these are set as
“Profiles”. So for Example the user may have; A RIoT-Minihub at Home, another
at Work, or in a shed!
RIoT CONTROL App can communicate with each RIoT-MINIHUB as an individual
“Profile”.
QS-MINIHUB-CONTROL-2
Page: 6
RIoT-MINIHUB CONTROL
Stage 3
Pair an RF Receiver with RIoT-MINIHUB
1. Press the RIoT-MINIHUB Setup Switch until the Data LED starts to flash
(takes ~1sec)
2. The Data LED will now flash 3X to indicate RIoTMINIHUB is ready to Learn
an RF Sensor/ Switch or Transmitter
3. On your RF Receiver Transmit RIoT Learn Signal (please see the RF Receiver
QS Guide)
4. RIoT-MINIHUB confirms the pairing with 12X very fast flashes on the Data
LED
5. RIoT-MINIHUB returns to normal operation (Data LED illuminates
constantly).
Repeat this process for each RF Receiver to be Paired
You can verify successful pairings as per below: Operate the RF Receiver Learn
Switch to transmit a signal. The RIoT-MINIHUB will briefly flash its Data LED
to show reception of a LEARNT RF Receiver.
Note: For some RF Receivers you can also present a magnet to operate the Learn
Switch
Learn
LEARN
QS-MINIHUB-CONTROL-2
Page: 7