amber connect ASC200 Amber Swift C200 Versatile Assets GNSS Tracker User Guide

June 5, 2024
amber connect

amber connect ASC200 Amber Swift C200 Versatile Assets GNSS Tracker

Overview

Main Features

  • GPS + LBS + WIFI Positioning
  • IP67 dust and waterproof (Device waterproof performance will be weakened if the sim is inserted by customers.)
  • Tamper alert
  • 6000mAh battery
  • Strong magnet installation
  • Fast charging

Specification

Frequency 850/900/1800/1900 MHz
Location Accuracy <10 Meters
Working voltage/current 3.7V/60 mA
Battery 6000mAh/3.7V industrial-grade Li-Polymer battery
MIC
LED Power (red), GPS (blue), GMS (green)
Stand by time 25 days
Working time 100 hours (GPS data uploaded in every 10s)
Dimension 85.0 (L) 58.0 (W) 29.00 (H) mm
Weight 230g (with magnetic cover)

Appearance

amber-connect-ASC200-Amber-Swift-C200-Versatile-Assets-GNSS-Tracker-
fig-2

Accessories

Device 1
Magnetic cover 1
User guide 1
Charger 1
Charge Cable 1
Collar Optional

LED indications

Power (Red)

Status Meaning
Flicker quickly (every 0.3 seconds) Battery low
Flicker slowly (1s on; 3s off) Fully charged
Flicker slowly (0.1s on; 3s off) Device works normally
Always-ON Charging
OFF No battery/ Malfunction

GPS (Blue)

Status Meaning
Flicker quickly (every 0.3 seconds) Searching GPS
Flicker slowly (0.1s on; 3s off) GPS is positioning
OFF GPS is normal

GSM (Green)

Status Meaning
Flicker quickly (every 0.3 seconds) GSM initialization
Flicker slowly (1s on; 3s off) GSM signal is normal
Flicker slowly (0.1s on; 3s off) GPRS online
Always-ON Calling
OFF No GSM signal/ No SIM card

Charging

Please charge the device with the original charger. It takes about 3 hours to fully charge the device.

Operation and Functions

Power on/off

Power on: Press and hold the ON/OFF button for 3 seconds, and the LEDs will flicker regularly if the device power on successfully
Power off: Press and hold the ON/OFF button for 3 seconds and the LEDs will be off in 2 seconds.

Note:

  1. Press the ON/OFF button and the LED will flicker for 15 seconds if the device power on successfully.
  2. Press the ON/OFF button and nothing will happen if the device power off successfully

SOS Number

Add SOS Number

SMS Command

SOS, A, number1, number2, number3# (A means add a number.) You could set 3 SOS numbers at a maximum. If set successfully, the terminal will reply “OK”.

e.g.

  • SOS,A, 1351060, 1351166, 136126****9#
  • SOS,A, 13510****60# (set the first SOS number)
  • SOS,A, 135116****6# (set the second SOS number)
  • SOS,A, 136126****8# (set the third SOS number)

Delete SOS number

  • SOS,D,1,2,3# (D means delete the SOS number)
  • e.g. SOS,D,1# (means delete the first number)
  • SOS,D,3# (means delete the third number)

If you do not know the sequence number, you can also delete the number by SMS command like this: SOS,D, number# e.g. SOS,D, 13527852360# means delete this SOS number directly It will reply “OK” if the number is deleted successfully.

Query the current SOS number

SOS# You can set an SOS number via the platform after the device is activated.

Working mode setting

Positioning in a regular time interval

SMS command: MODE,1,t#

T is the GPS working time interval, range:0/5-7200 minutes. Default: 30 minutes sensor will be invalid in this mode.

Power saving mode

MODE,2, T# T is the GPS working time interval, range: 10-1800 seconds. Default: 10 seconds

Deep sleep mode

MODE,3,T1,T2#
T1 is the start time of waking up the GPS, format: HH: MM (e.g. 10:05)
T2 is the wake-up time interval (e.g. 1 hour, 2 hours, 3 hours…) Default is 24 hours.
Range: 1-24 hours

Sound Alarm

If the noise is above 60db, the device would send an alarm to the preset SOS numbers.

  • SMS command to set sound alarm: SODALM,A,M,N,P,Q#
  • A= ON/OFF; Default value: OFF.
  • M= 0~2; 0: GPRS+ automatic recording; 1: GPRS only; 2: GPRS+voice monitoring; Default: 2.
  • N= Time for sound alarm triggered, the range is 1-10 seconds; Default: 3 seconds.
  • P= Interval of sound alarms, ranging from 1-60 minutes. Default: 2 minutes.
  • Q= Automatic recording time, ranging from 10-600 seconds. Default: 60 seconds. Query the current parameters: SODALM#

Tamper Alert

An alert will be sent if the device is disassembled or removed. In standby mode, an alert message will be uploaded and tracking mode will be activated for 20 minutes if device dis-assembly is detected. After 20 minutes, the device enters into ultra-long standby mode. The dis-assembly alert can be turned off command: cancel# REALM,A, M#

  • A=ON/OFF; Default: ON
  • M=0~3; alarm way, 0: GPRS, 1: SMS+GPRS; M=2 GPRS+SMS+phone call; M=3 GPRS+Phone call. Default: 1;

Voice monitoring

When SOS number sends monitor command:

MONITOR# to the device, the device will reply “OK” and call the SOS number. After the call is connected, the terminal will enter the monitor condition. The SOS number can hear the sound around the terminal. For more operations, please refer to the full command list.

Platform & APP

Login service platform
Please login to the designated service platform to set and operate the device
Download APP
Please download and install the APP on the designated website, APP store, or Google Play Store.

Warning
A battery specified by the manufacturer is recommended. Maintenance or service arising from any other accessories is not guaranteed. The manufacturer assumes no responsibility for any damage caused by non-original accessories.

  • Do not bend or open the battery.
  • Do not immerse or burn the battery.
  • Device dis-assembly is strongly forbidden.
  • The non-professional operation may cause device damage

Troubleshooting

If you are having trouble with your device, try these troubleshooting procedures before contacting the service professional.

Problem Causes Solution

Poor signal

|

The signal waves are unable to transmit when using the GPS tracker in the places that have poor signal reception, such as tall buildings or in the basement.

|

Using the GPS tracker in places that have good signal conditions.

Unable to boot| The poor switch is off| Switch to ON
No battery| Charge
No SIM card| Insert SIM card

Unable to connect to the network

| SIM card inserted incorrectly| Check SIM card
Dirty things exist above the SIM card| Clean Sim card
Invalid SIM card| Contact network supplier
Not in the GSM service area| Move to the service area
Poor signal| Move to an area with strong

signal

Fail to locate| SIM has no access to GPRS| Contact network supplier to get GPRS service
Always reply “Address inquiry failed”| Contact supplier

Warranty instructions and service

  • The warranty is valid only when the warranty card is properly completed and upon presentation of the proof of purchase consisting of the original invoice indicating the date of purchase, model, and serial no. of the product. We reserve the right to refuse a warranty if this information has been removed or changed after the original purchase of the product from the dealer.
  • Our obligations are limited to repair of the defect or replacement of the defective part or at its discretion replacement of the product itself.
  • Warranty repairs must be carried out by our Authorized Service Center. Warranty cover will be void, even if a repair has been attempted by any unauthorized service center.
  •  Repair or replacement under the terms of this warranty does not provide the right to extension or renewal of the warranty period.
  • The warranty is not applicable to cases other than defects in material, design, and workmanship.

Need help? Contact 24/7 live support!

Support@amberconnect.com
Chat via the website www.amberconnect.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

amber connect User Manuals

Related Manuals