UBIQUITI NETWORKS USW Flex Mini Managed 5-Port Gigabit Switch User Guide

June 5, 2024
UBIQUITI NETWORKS

UBIQUITI NETWORKS USW Flex Mini Managed 5-Port Gigabit Switch User Guide

Package Contents

  • UniFi Switch Flex Mini

  • Power Adapter (5V, 1A)*

Included only in the single-pack of the USW-Flex-Mini.

System Requirements

  • Linux, Mac OS X, or Microsoft Windows 7/8/10
  • Java Runtime Environment 1.8 or above recommended
  • Web Browser: Google Chrome (Other browsers may have limited functionality)
  • UniFi Network Application v5.12.5 (or newer), available at: ui.com/download/unifi

Hardware Overview

  1. System LED
    Flashing White| Initializing
    ---|---
    Steady White| Factory defaults, waiting for adoption.
    Alternating White/Blue| Device is busy; do not touch or unplug it. This usually indicates that a process such as a firmware upgrade is taking place.
    Steady Blue| Successfully adopted by a network and working properly.
    Flashing Blue| This is used to locate a device. When you click Locate in the UniFi Network Application, the System LED will flash blue. The Application will also display the location of the UniFi Switch on the map.

  2. RJ45 Link/Speed/Activity LED (Ports 1- 5)
    Off| No Link
    ---|---
    Amber| Link established at 10/100 Mbps Flashing indicates activity
    Green| Link established at 1000 Mbps (1 Gbps) Flashing indicates activity

  3. PoE In Port
    This RJ45 port supports a 10/100/1000 Mbps Ethernet connection and 802.3af/at PoE input.

  4. RJ45 ports support 10/100/1000 Mbps Ethernet connections.

  5. Power Port
    Connect the included Power Adapter to the Power port.

  6. Reset Button
    Resets to factory defaults. The device should be running after bootup is complete. Press and hold the Reset button for about 10 seconds until the LED starts flashing and then becomes solidly lit. After a few seconds, the LED will turn off, and the device will automatically reboot.

Connecting Power

Connecting Power

Connecting Ethernet

Connecting Ethernet

Specifications

USW-Flex-Mini


Dimensions| 107.16 x 70.15 x 21.17 mm (4.22 x 2.76 x 0.83 °)
Weight| 150 g (5.29 oz)
Networking Interfaces| (5) 10/100/1000 Mbps RJ45 Ports
PoE In Interface| 802.3af/at PoE (Pins 1, 2+; 3, 6-)
Max. Power Consumption| 2.5W
Power Method| USB Type C, 5V

802.3aflat PoE (44 – 57VDC, 0.05 0.04A)

Power Supply| 5V, 1A Power Adapter
Voltage Range USB Type C 802.3aVat PoE| 4.7 5.2VDC 44 57VDC
LEDs
System
RJ45 Data Ports| Status
Link/Speed/Activity
ESD/EMP Protection| ± 16kV Air, ± 12kV Contact
Operating Temperature| -5 to 45° C (23 to 113° F)
Operating Humidity| 10 to 90% Noncondensing
Certifications| CE, FCC, IC

  • Included only in the single-pack of the USW-Flex-Mini.

Safety Notices

  1. Read, follow, and keep these instructions.
  2. Heed all warnings.
  3. Only use attachments/accessories specified by the manufacturer.

WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.

WARNING: Do not use this product in location that can be submerged by water.

WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning

Electrical Safety Information

  1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed.
  2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician.

Limited Warranty

ui.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions

Compliance

FCC

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Consult the dealer or an experienced radio/TV technician for help.

ISED Canada

CAN ICES-3(B)/NMB-3(B)

Australia and New Zealand

CE Marking

CE marking on this product represents the product is in compliance with all directives that are applicable to it.

WEEE Compliance Statement

Online Resources



Documents / Resources

| UBIQUITI NETWORKS USW Flex Mini Managed 5-Port Gigabit Switch [pdf] User Guide
USW Flex Mini, Managed 5-Port Gigabit Switch, USW Flex Mini Managed 5-Port Gigabit Switch
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

UBIQUITI NETWORKS User Manuals

Related Manuals