JBC P105 Pedal for NAST and NANT Stations Instruction Manual
- June 5, 2024
- JBC
Table of Contents
JBC P105 Pedal for NAST and NANT Stations
Packing List
The following items are included:
- Pedal
- Manual
Connection to NAST / NANT (Nano Soldering Station)
Assembly
- Disassemble the tool holder from the station with a 1,5mm allen key (1). It is not necessary to completely loosen the screw. Just enough to release the tool holder.
- Insert the tool holder (2) by its bottom side through the connection.
- Reassemble the tool holder (3) and fasten the locking screw with the allen key (1). Adjust the position of the connection and lock it against the tool holder by fastening the screw (4).
- Plug in the pedal connector (5) to the equipotencial connector at the back side of the station
Specifications
P105 Pedal for NAST & NANT Stations
Ref. P-105
- Cable length: 1.9 m / 74.80 in
- Total Net weight: 457 g / 1.01 lb
- Total Package Dimension / Weigt: 382 x 159 x 81 mm / 602 g
- (L x W x H) 15.04 x 6.26 x 3.19 in / 1.33 lb
Complies with CE standards ESD safe
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>