JBC GSF Guide Kits for SF280 Instruction Manual
- June 5, 2024
- JBC
Table of Contents
www.jbctools.com
GSF Guide Kits for SF280
Instruction Manual
GSF
Guide Kits for SF280
GSF Guide Kits for SF280
This manual corresponds to the following references:
With Solder Wire Perforation:
GSF08V-B for wire Ø 0.8 mm / Ø 0.032 in
GSF10V-B for wire Ø 1.0 mm / Ø 0.040 in
GSF12V-B for wire Ø 1.2 mm / Ø 0.047 in
GSF15V-B for wire Ø 1.5 mm / Ø 0.059 in
GSF16V-B for wire Ø 1.6 mm / Ø 0.063 in
Without Solder Wire Perforation:
GSF04D-B for wire Ø 0.4 mm / Ø 0.016 in
GSF05D-B for wire Ø 0.5 mm / Ø 0.020 in
GSF06D-B for wire Ø 0.6 mm / Ø 0.025 in
GSF08D-B for wire Ø 0.7 – 0.8 mm / Ø 0.028 – 0.032 in
GSF10D-B for wire Ø 0.9 – 1.0 mm / Ø 0.035 – 0.040 in
GSF12D-B for wire Ø 1.1 – 1.2 mm / Ø 0.043 – 0.047 in
GSF15D-B for wire Ø 1.3 – 1.5 mm / Ø 0.051 – 0.059 in
GSF16D-B for wire Ø 1.6 mm / Ø 0.063 in
GSF Guide Kit for SF280 with Solder Wire Perforation
Packing List
The following items are included:
Guide Tube ……………………………………… 1 unit
Inlet Nozzle ……………………………………… 1 unit
Guide Wheel ……………………………………. 1 unit
Counter Wheel ………………………………… 1 unit
Blade Clamp ……………………………………. 1 unit
Blade ………………………………………………… 1 unit
Intermediate Nozzle ……………………….. 1 unit
Outlet Nozzle …………………………………… 1 unit references see table on page 4
Allen Screws ………………………………….. 2 units
Headless Screws* ………………………….. 3 units
Manual ………………………………………………. 1 unit Ref. 0028099
GSF Guide Kit for SF280 without Solder Wire Perforation
The following items are included:
Guide Tube ……………………………………… 1 unit
Inlet Nozzle ……………………………………… 1 unit
Traction Wheel ………………………………… 1 unit
Support Wheel ………………………………… 1 unit
Counter Wheel ………………………………… 1 unit
Intermediate Nozzle ……………………….. 1 unit
Outlet Nozzle …………………………………… 1 unit references see table on page 5
Allen Screws ………………………………….. 2 units
Headless Screws ………………………….. 3 units
Manual ………………………………………………. 1 unit Ref. 0028099
GSF Guide Kit for SF280 with Solder Wire Perforation
GSF Guide Kit for SF280 without Solder Wire Perforation
Changing Guide Kits Changing Wheels and Blade For this operation, disconnect
the device from the mains. Disconnect the tool from the control unit and open
its cover.
First disassemble the guide tube (6), the nozzles (2)+(3), then the wheels,
blade and clamp (4)+(5). Disassemble the counter wheel (1). Use the allen key
and the spanner, provided with the station.
Assembly with Solder Wire Perforation:
Assemble the counter wheel (1).
Insert the intermediate nozzle (2) until its collar rests against the housing
and tighten the screw.
Assemble the inlet nozzle (3).
Assemble the guide wheel (4) and tighten the screw.
Assemble the blade first, then mount the blade clamp (5) onto the same axis
and tighten the screw. Caution: handle the blade carefully to avoid injury.
Insert the guide set (6).
Assembly without Solder Wire Perforation:
Assemble the counter wheel (1).
Insert the intermediate nozzle (2) until its collar rests against the housing
and tighten the screw.
Assemble the inlet nozzle (3).
Assemble the traction wheel (4) onto the axis and tighten the screw.
Assemble the support wheel (5) and tighten the screw.
Insert the guide set (6).
Replacing the Guide Tube
Once the tool is disconnected from the control unit follow the instructions
below:
Disassemble the outlet nozzle (1) from the guide tube.
Open the guide clamp (2), take off the guide tube (3) and insert the new one.
Note: The guide tube length can be easily adjusted (4) when the guide
clamp knob (2) is open.
Once the guide tube length is adjusted close the guide clamp knob (2).
Assemble the outlet nozzle (1) onto the guide tube tip.
Enter en “Tool Settings” at the SF control unit main menu and select the
proper wire diameter.
Tool Assembly
Connect the tool to the control unit following the steps:
Insert and push the guide nozzle until the end
(1) and tighten the screw (2).
Connect the jack (3).
Solder Wire Loading
Put the solder reel into its support (1).
Introduce the solder wire into the inlet nozzle (2) until it reaches the
wheels (3).
Use the Tin Reload Process in the Main Menu (4).
The Reload Process screen opens.
Press to start the process.
Make sure the wire passes through the Intermediate Nozzle and enters into the Guide Tube (5).
Specifications
GSF
Guide Kits for SF280| Total Net Weight:| Package Weight:
---|---|---
With Perforation:
Ref.: GSF08V-B wire Ø 0.8 mm / Ø 0.032 in
Ref.: GSF10V-B wire Ø 1.0 mm / Ø 0.040 in
Ref.: GSF12V-B wire Ø 1.2 mm / Ø 0.047 in
Ref.: GSF15V-B wire Ø 1.5 mm / Ø 0.059 in
Ref.: GSF16V-B wire Ø 1.6 mm / Ø 0.063 in| 108 g / 0.24 lb
108 g / 0.24 lb
94 g / 0.21 lb
94 g / 0.21 lb
94 g / 0.21 lb| 200 g / 0.44 lb
200 g / 0.44 lb
186 g / 0.41 lb
186 g / 0.41 lb
186 g / 0.41 lb
Without Perforation:
Ref.: GSF04D-B wire Ø 0.4 mm / Ø 0.016 in
Ref.: GSF05D-B wire Ø 0.5 mm / Ø 0.020 in
Ref.: GSF08D-B wire Ø 0.7 – 0.8 mm / Ø 0.028 – 0.032 in
Ref.: GSF10D-B wire Ø 0.9 – 1.0 mm / Ø 0.035 . 0.040 in
Ref.: GSF12D-B wire Ø 1.1 – 1.2 mm / Ø 0.043 – 0.047 in
Ref.: GSF15D-B wire Ø 1.3 – 1.5 mm / Ø 0.051 – 0.059 in
Ref.: GSF16D-B wire Ø 1.6 mm / Ø 0.063 in| 104 g / 0.23 lb
104 g / 0.23 lb
104 g / 0.23 lb
104 g / 0.23 lb
90 g / 0.20 lb
90 g / 0.20 lb
90 g / 0.20 lb| 196 g / 0.43 lb
196 g / 0.43 lb
196 g / 0.43 lb
196 g / 0.43 lb
182 g /0.40 lb
182 g /0.40 lb
182 g /0.40 lb
Guide Tube Length: 126 cm / 49.6 in
– Package Dimensions: 245 x 185 x 45 mm
(L x W x H) 9.65 x 7.28 x 1.77 in
Complies with CE standards.
ESD safe
Warranty
JBC’s 2-year warranty covers this equipment against all manufacturing defects,
including the replacement of defective parts and labor.
The warranty does not cover product wear or misuse. In order for the warranty
to be valid, equipment must be returned, postage paid, to the dealer where it
was purchased.
Get 1 extra year of JBC warranty by registering here:
https://www.jbctools.com/productregistration/ within 30 days of purchase.
This product should not be thrown in the garbage. In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>