Linxdot LD-1001 Helium Hotspot User Guide
- June 5, 2024
- Linxdot
Table of Contents
Linxdot LD-1001 Helium Hotspot User Guide
Installation
Step 1
Find a suitable location for your Linxdot.
We suggest positioning the antenna against a window for better coverage.
Connecting
Step 2
Connect the power supply and the included antenna to your Linxdot but don’t
turn it on yet.
We suggest using the optional Ethernet port where possible.
Download App
Step 3
Download the Helium Hotspot app.
Power on
Step 4
Activate your Linxdot.
Select the Linxdot LoRa Hotspof from the list.
Agree to diagnostics and power on our Linxdot.
Scan for your Linxdot and select it once I found.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits setforth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This device in compliance with the essential requirements and other relevant
provisions of UK
Radio Equipment Regulations (SI 2017/1206); UK Electrical Equipment (Safety)
Regulations (SI
2016/1101); and UK Electromagnetic Compatibility Regulations (SI 2016/1091).
All essential radio test suites have been carried out.
Operation Frequency:
For BT: 2402MHz~2480MHz
For WIFI:
2412MHz~2472MHz (802.11b/802.11g/802.11n(HT20))
For LoRa: 868.1~868.5MHz
Max Output Power:
For BT:0.0019W
For WIFI:0.0125W
For LoRa:0.0053W
Manufacturer:Shenzhen Eternity Technology Co., Ltd
Address:Building A2, YingZhan Industrial Park, LongTian Street,
PingShan, ShenZhen, China
E-mail: Nickchen@szeternity.com
Importer:FX Technology Limited
Address:2 Stone Buildings, London WC2A 3TH, United Kingdom
DECLARATION OF CONFORMITY
I hereby declare that the product
Product: Linxdot Hotspot
Model No.: LD-1001
Trade mark: Linxdot
Accessories:
Adapter Information:
Model: TPQ-228F120200VW01
Input: AC 100-240V. 50/60Hz. 0.8A
Output: DC 12.0V. 2.0k 24.0W
Manufacturer: Shenzhen Tianyin Electronics Co.. Ltd.
(Name of product. type or model. batch or senal number)
satisfies all the technical regulations applicable to the product within the scope of UK Radio Equipment Regulations (SI 2017/1206): UK Electrical Equipment (Safety) Regulations (SI 2016/1101): and UK Electromagnetic Compatibility Regulations (SI 2016/1091) and declare that the same application has not been lodged with any other UK Approved Body.
EN 62311:2020
ETSI EN 301 489-17 V3.2.4 (2020-09)
Final draft ETSI EN 301 489-3 V2.2.0 (2021-11)
ETSI EN 301 489-1 V2.2.3 (2019-11)
ETSI EN 300 328 V2.2.2 (2019-07)
ETSI EN 300 220-1 V3.1.1 (2017-02)
ETSI EN 300 220-2 V3.2.1 (2018-06)
BS EN IEC 62368-1:2020+A11:2020
(Title(s) of regulations. standards. etc.)
All essential radio test suites have been carried out.
NOTIFIED BODY: MICOM Labs Inc
Address:
575 Boulder Court.
Pleasanton, California 94566
USA
Identification Number: AB 2280
MANUFACTURER or AUTHORISED REPRESE NTATIVE
– Address:
Shenzhen Eternity Technoloq1 Co .. Ltd
BuildinR A2. YinqZhan Industrial Par1<, Lonf!Tlan
Street, PlngShan, ShenZhen, China
This declaration is issued under Ille sole responsibitlty of the manufacturer and, if applicable, his authorised representative.
Point of contact:
Nick /18825289159
(Name. telephone: and Fax number)
2021-12-16
(piece, date of issue)
(Signature)
Nick/PM
(Name and title in block letters)
Documentation: www.linxdot.com/support
Contact us: hello@linxdot.com
Designed by Linxdot in London, UK. Assembled in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>