JBC JTT Heater Hose Set Instruction Manual
- June 5, 2024
- JBC
Table of Contents
JBC JTT Heater Hose Set Instruction Manual
This manual corresponds to the following references:
JT-T1A (110V/120V)
JT-T2A (230V)
Packing List
The following items are included:
Changing JTT Heater Hose Set
Features
JTT Heater Hose Set allows to repair medium and large SMDs. It works with JTU Control Unit and JT Nozzles.
Replacing the Heating Element
Note: Only perform this operation when the heating element is cold and the unit is disconnected from the mains.
Loosen the screw (1) and pull the worn heating element out of the handle (2).
Insert the new heating element, make sure its pushed all the way in (2) and tighten the screw (1).
Specifications
JTT
Heater Hose Set
Ref.: JT-T1A (110V/120V)
Ref.: JT-T2A (230V)
- Hose Length: 1100 mm / 43.31 in
- Total Net Weight: 370.5 g / 0.817 lb
- Package Dimensions/Weight: 382 x 159 x 81 mm / 508.8 g
(L x W x H): 15.04 x 6.26 x 3.19 in / 1.122 lb
Complies with CE standards.
ESD safe.
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects,
including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must be returned, postage
paid, to the dealer where it was purchased.
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at
the end of its life must be collected and returned to an authorized recycling
facility.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>