AOPEN 24HC5QR FHD Display User Manual
- June 5, 2024
- AOPEN
Table of Contents
AOPEN 24HC5QR FHD Display
Important safety instructions
Please read the following instructions carefully
- Cleaning the LCD monitor screen: First, make sure the power cord you are using meets the standards for your region.
- Turn off the LCD monitor and unplug the power cord.
- Spray a non-soluble cleaning solution onto a cloth and gently wipe the screen.
- Never spill any liquid directly onto or into the screen or its case.
- Do not use any ammonia- or alcohol-based cleaners on the LCD monitor screen or case.
- AOPEN is not responsible for damage caused by the use of any ammonia or alcohol based cleaners.
- Do not place the LCD display near a window. Exposure to rain, moisture, or direct sunlight can cause serious damage to when the device.
- Do not press on the LCD screen. Excessively forceful pressing can cause permanent damage to the display.
- Do not remove the case or attempt to repair the machine by yourself. All maintenance tasks should be performed by an authorized technician.
- Store the LCD display in a room with a temperature between -20°C – 60°C (-4°F – 140°F). Permanent damage may result if the LCD display is stored outside of this range.
- If any of the following situations occur, unplug the monitor immediately and contact an authorized technician:
- The signal cable between the monitor and the computer is worn or damaged.
- Liquid spills onto the LCD display or the display is exposed to rain.
- The LCD monitor or case is damaged.
Attaching the monitor base
- Unpack the monitor base and place the base on a smooth work surface.
- Unpack the monitor.
- Attach the monitor stand arm to the base.
- Make sure the base snaps into the monitor stand arm. (Selected models only)
- Turn the white screw with the included tool or a suitable coin to secure the base to the stand arm (select models only)
Connect the monitor to your computer
-
Turn off your computer and unplug the power cord.
-
Connect Video Cable
a.Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA cable to the computer. (Optional)-
Connect HDMI Cable (Only HDMI-input model) (Optional)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the HDMI cable to the computer. -
Connect DP Cable (Only DP-input model) (Optional)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the DP cable to the computer.
-
-
Connect the Audio cable (only Audio input model) (optional)
-
Connect the USB Type C Cable (only USB Type C input model) (Optional)
-
Insert the monitor power cable into the power port at the back of the monitor.
-
Plug the power cords of your computer and your monitor into a nearby electrical outlet.
-
Select Power-off USB charge ON/OFF to enable/disable Power-off USB charge function. (Optional)
~| Note: The location and names of the sockets on the monitor may vary according to monitor model, and some sockets may
not available for some models.
---|---
HDMI (optional)| (optional)
VGA IN (optional)| USB (optional)
AUDIO IN (optional)| DP (optional)
AUDIO OUT (optional)| USB Type C (optional)
External control
| No. | Item | Description |
|---|
1
| ****
Menu/Navi/OK button
| ****
Power on/Long press to Power off.
Enter the main menu, Select/Adjust menu options.
Regulatory and safety statements
FCC statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is installed in a residential area. This equipment generates,
uses, and can radiate radio frequency energy, and if not installed and used in
accordance with instructions, may cause interference to radio communications.
However, there is no guarantee that interference will not occur in a specific
installation. If the device does cause interference to radio or television
reception (which can be determined by the switchgear), it is recommended that
the user take one or more of the following measures to eliminate the
interference:
- Readjust the direction or position of the receiver antenna.
- Increase the distance between the device and the receiver.
- Connect the device power to a power outlet that is different from the circuit to which the receiver is connected.
- Contact your retailer or an experienced radio/TV technician for help.
Note
To prevent damage to the monitor, do not lift the monitor using the stand.
Note: shielded cable
All connections to other computing devices must be through shielded cables to
comply with EMC regulations.
Note: peripherals
Only certified peripherals (input/output devices, terminals, printers, etc.)
that meet Class B limits should be connected to the device. Using uncertified
peripherals may cause interference to radio and television reception.
Note Any changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate this product.
Operating conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must be able to accept any interference
received, including interference that may cause undesired operation.
Note: Canadian users
This Class B digital device complies with Canadian ICES-003 specifications.
Explanatory note on “Regulations on the Management of Waste Electrical and
Electronic Products Recycling and Disposal”
To better care for and protect our planet, when the user no longer needs this
product or the product end of life, please comply with national laws and
regulations on the recycling of electrical and electronic product waste, and
recycle it through local manufacturers with nationally recognized recycling
qualifications.
Abandonment of waste equipment for EU household users
This symbol on the product or on its packaging indicates that the product must not be disposed of with other household waste. When disposing of used devices, it is your responsibility to bring it to a collection point that recycles used electrical and electronic equipment. The separate collection and recycling of used devices at the time of disposal helps to conserve natural resources and ensures that they are recycled in a manner that protects human health and the environment. For more information about recycling points for used devices, please contact your local city office, household waste disposal service, or the shop where you purchased the product.
CE declaration of conformity
Hereby, AOPEN Smartview Inc., declares that this LCD monitor is in compliance
with the essential requirements and other relevant provisions of EMC Directive
2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU
and Directive 2009/125/EC with regard to establishing a framework for the
setting of ecodesign requirements for energy-related product.
AOPEN monitor is purposed for video and visual display of information obtained
from electronic devices.
SPECIFICATION
LCD Panel
| Driving System| TFT Color LCD
---|---|---
Size| 23.6”W (60 cm)
Pixel Pitch| 0.272mm (H) x 0.272mm (V)
Brightness| 250 cd/m2(Typical)
Contrast| 100000000:1 Max (ACM)
Viewable Angle| 178°(H),178°(V) (CR=10)
Response Time| 1ms(TVR)
Panel Type| VA
H-Frequency| HDMI: 31.469-192.692KHz DP: 31.469-192.692KHz
V-Frequency| HDMI: 48-165Hz DP: 48-165Hz
Display Colors| 16.7M Colors
Dot Clock| HDMI: 393.092MHz DP: 393.092MHz
Maximum Resolution| DP: 1920×1080 @165Hz HDMI: 1920×1080 @165Hz
Plug & Play| VESA DDCCI/DDC2B
Power Consumption
| On Mode| 21W(Typical)
Sleep mode| 0.5W(Typical)
Off Mode| 0.3W(Typical)
Input Connector| HDMI (Only HDMI-Input Model) (Optional) DP(Only DP-Input
Model) (Optional)
Input Video Signal| HDMI (Only HDMI-Input Model) (Optional) DP(Only DP-Input
Model) (Optional)
Speakers| 2 W x 2 (Only Audio-Input Model) (Optional)
Maximum Screen Size| Horizontal: 521mm Vertical: 293mm
Power Source| INPUT: 100-240 V~50/60 Hz
Environmental Considerations
| Operating Temp: 0° to 40°C Storage Temp: -20° to 60°C Operating Humidity:
20% to 80%
Dimensions| 539.8 (W) x 414.1 (H) x 203.0 (D) mm
Weight (N. W.)| 3.00kg (net)
Mechanism Specifications
| Tilt: -5°~20° Swivel: No
Height Adjustment: No Pivot: No
Detachable foot stand: Yes
External Controls
| Switch/Buttons| Menu/Navi/OK
Functions
| Brightness Contrast
Low Blue Light Black Boost ACM
HDR
Super Sharpness Gamma
Color Temp. Modes Color Space
Grayscale Mode 6-axis Hue
6-axis Saturate Volume
Mute
Over Drive FreeSync Premium TVR
Refresh Rate Num Ultra-low latency
Aim Point
| Language OSD Timeout Transparency OSD Lock Input
Auto Source DP Format Wide Mode DDC/CI
HDMI Black Level Quick Start Mode Information
Reset All Settings
Specifications vary depending on model and/or region.
Find manuals and other documents for your AOPEN product on the official AOPEN support website.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The following local Manufacturer /Importer is responsible for this declaration:
Product: LCD Monitor
Brand: AOPEN
Model Number: 24HC5QR
SKU Number: 24HC5QR xxxxxXx (“x”= 0-9, a~z, A~Zor Blank)
Name of Responsible Party: Acer America Corporation
Address of Responsible Party: 333 West San Carlos St. Suite 1500 San
Jose, CA 95110 U. S. A.
Contact Person: Acer Representative
Phone No. 254-298-4000
Fax No.: 254-298-4147