MAGMA T10-536 Party Table Cutting Board Owner’s Manual
- June 5, 2024
- MAGMA
Table of Contents
PREP SERIES
PARTY TABLE
CUTTING BOARD T10-536
OWNER’S MANUAL
COMPONENT PARTS & INSTALLATION
To use within the T10-312B Bait Table:
Step 1: Remove knife holder straps on the interior of the bait table on
both sides with a Phillips head screwdriver.
Step 2: Slide the cutting board into the bait table.
PRODUCT REGISTRATION
Register your product today for support.
Visit magmaproducts.com/pages/submit-your-product-registration or scan the QR
code.
https://magmaproducts.com/pages/submit-your-product- registration
LIMITED WARRANTY
Magma Products, LLC guarantees this product to be free from defects in
materials or artistry to the original consumer. This guarantee is for the
periods herein specified when used under normal and reasonable conditions, one
(l) year from the date of original purchase. This warranty does not include
the cost of property damage or any inconvenience due to the failure of the
product.
Nor does it cover damage due to misuse, abuse, accident, or damage resulting
from the transportation of the product. Nor does it include damage resulting
from the commercial use of this product. Nor does it include, on stainless
steel products, “Surface Rust”;
Excessive Corrosion due to exposure to salt water; or Discoloration or
Corrosion caused by exposure to excessive heat or failure to properly clean
and care for the stainless steel surfaces.
If the product fails to operate due to a defect in materials or workmanship
during the warranty period, the defective part will be repaired or replaced at
Magma’s option. If you wish to obtain performance under this limited warranty,
contact Magma’s Customer Service Department via telephone at (562) 627- 0500,
via e-mail at mail@MagmaProducts.com, or via
U.S. Postal Service mail at “Magma Products, LLC, Attention Customer Service,
3940 Pixie Ave. Lakewood, CA, 90712”. The defective part and proof of purchase
must be returned postage prepaid to Magma Products, LLC. We suggest that you
keep your purchase receipt as we may require reasonable proof of purchase.
In the state of California only, if refinishing or replacement of the product
is not commercially practicable, the retailer selling the product, or Magma
Products, LLC, will refund the purchase price paid for the product, less the
amount directly attributable to use by the original consumer prior to the
discovery of the nonconformity. In addi- on, in the state of California only,
you may take the product to the retail establishment from which it was
purchased or to any retail establishment selling this product in order to
obtain performance under this warranty. All implied warranties, including the
implied warranties of merchantability and fitness for a particular purpose,
are limited in duration to the express warranty periods specified herein for
the parts described herein. Some states do not limit how long an implied
warranty lasts, so the above limitation may not apply to you. Neither Magma
dealers, nor the retail establishment selling this product has any authority
to make any warranties or to promise remedies in addition to or inconsistent
with those stated above. Magma’s maximum liability shall not exceed the
purchase price of the product paid by the original consumer. Some states do
not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation or exclusions may not apply to you. The warranty gives
you specific legal rights and you may also have other rights which vary from
state to state.
MAGMA and the Magma logo are registered trademarks of Magma Products, LLC
Magma Products, LLC
3940 Pixie Avenue, Lakewood, CA 90712 USA
562-627-0500
mail@magmaproducts.com
magmaproducts.com