KEDIERS C-570 Computer Case ATX Mid-Tower PC Gaming Case Instruction Manual
- June 5, 2024
- KEDIERS
Table of Contents
KEDIERS C-570 Computer Case ATX Mid-Tower PC Gaming Case Instruction Manual
Please read this manual carefully.
Thank you for purchasing the KEDIERS – Tempered Glass, Premium ATX Mid-Tower Case.
KEDIERS Series
This is the latest 2021open game case designed by the KEDIERS team. The elegant and unique appearance fully reflects the personality of the modern people and shows your noble taste! It is not only an open game console, but also a piece of art or decorations. People of any age like this product. Whether you are using it yourself or as a gift to friends and family, choose KEDIERS 2021’s latest open chassis is the best choice!
Case Specifications
Length. …………………………………………………………………………..480 mm
Width. ……………………………………………………………………………….. ,230mm
Height……………………………………………………………………………. 510mm
Maximum GPU length…………………………………………………….. 355mm
Maximum CPU cooler height. …………………………………………. 155mm
Maximum PSU length. ……………………………………………………. 250mm
Fan locations:
Front:………………………………………………………….. 3 x 120mm
Top. ……………………………………………………………….. 2 x120mm
5|de……………………………………………………………………………………2X 1 Omm
Radiator compatibility:
Front………………………………………………………….. 240mm
Top………………………………………………………………………………. 240mm
Accessory Kit Content
Case Feature
- Tempered Glass Left Panels
- Tempered Glass Right Panels
- Premium handle
- Rear HDD Mounts
- Rear SSD Mounts
- cable management box
- RGB control board
- Multi-function remote control
- Cool 120 rgb fan
Removing the Side Panels
Remove the thumbs screws and pull the side panel off.
Installing the Motherboard
SnOp your motherboard ‘s I/O sheld into the cutout
Align the motherboard with the standoffs in the case.
Secure with the included screws.
Installing SSDs
- Remove the screws to release the drive troy from the back of the motherboard troy.
- Slide the 2.5″ drive into the tray until it snaps into place.
- Reattach the drive tray to the back of the motherboard tray.
Installing HDD
For the HDD installation method, please note that you need to install the HDD hard disk on the back panel of the chassis before installing the computer motherboard.
Installing the Power Supply
lower chamber of the case, and secure with four screws from behind.
Installing PCI-E/PCI Card(s)
- Remove thumbscrews.
- Install the expansion card and secure with thumbscrews.
Installing the 240 Water Cooling
-
Top installation method: first remove 2 RGB fans, then place the 240 water cooling on the top, and then lock the screws from the bottom.
-
Front installation method: First remove 2 RGB fans, then place the 240 water cooling on front, and then lock the screws from the inside.
Organize the Lines
- Finish the Lines of the Backplane with Cable ties.
- Put the Extra Lines into the Cable Management Box.
RGB and Computer Motherboard Synchronization Function
Download the corresponding RGB synchronization software according to the
computer motherboard.
Long press the RGB button to switch to motherboard mode.
Frequently Asked Questions
-
Does the polarity matter with the I/O panel’s power and reset header?
No, only the LED headers. -
Who shouId I contact if I received my case damaged or one of the fans is no longer working?
Please go to kediers.service.com and request an RMA so that we can replace the damaged part(s). -
Where can I mount a fan?
| Front | 3×1 20mm |
|---|---|
| Top | 2x 1 2Ornm |
| Rear | x |
| Bottom | x |
| Side | 2x120mm(Optional) |
| Mid | x |
To learn more about this case visit the product page at kediers.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>