JOYO BanTamP XL Tube Guitar Amplifier User Manual

JOYO BanTamP XL Tube Guitar Amplifier

Safety instructions

• CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO
• QUALIFIED SERVICE PERSONNEL.
• WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
• The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’ s enclosure that may be
• of sufficient magnitude to constitute a risk of electric shock to persons.
• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the
• product.
• This symbol is intended to alert the user– Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when
• moving the cart/apparatus combination to avoid injury from tip-over.
• User instructions: After you turn on the banTamP xL, the tube warms up for the first 20-30 seconds, the unstable sound during this period is normal.

Detailed safety instructions

• For your safety and let you be familiar with this product, please read all the safety and operation instructions before use.
• Please keep this user manual for future use and maintenance.
• Please follow all the safety instructions on the product or in the user manual.
• Use the attached power adapter only. If use other power adapter, it will damage the internal cireuits or erease nO1Se. Keep it away from children!
• Please install this product according to manufacturer s instructions. Put it in places that have good ventilation and heat dissipation. Don tblock any ventilation openings nor cover it with cloth and the like.
• Don tuseit near water or damp areas, don t drop water or other liquid substance into this product;
• Don tuse it near heat sources, such as heater, electrothermal oven, high power amplitier and more.
• Don tput hazardous chemicals on the product, mflammable and explosive substances such as alcohol, thinner and so on.
• Do not use alcohol or other cleaning fluids to clean this product, otherwise it will damage the surface, use a clean dry cloth when necessary.
• Don t damage the power cord or plug. Don t pull the power cord and other parts. Please unplug it if you need to move this procduct.
• Please turn off the power switch and unplug the AC power socket during thunderstorm, lightning or if it is not in use for a long time.
• Should any of the following occur, please switch it off and unplug it and contact your local distributor or have it repaired by qualified personnel.
• Metal or other solid object or liquid falls into the cabinet, or gets caught in the rain.
  •  The power cord or power plug were damaged., cable core are exposed or wire break.
  •  The product is in smoke, peculiar smell or other abnormal codition.
  •  The product falls on the ground or malfunctions

Panel instruction

Front panel

1. Head’s Model.

2. Guitar Input.

3. Channel Switch:for choosing the channel.

4. Bluetooth Switch: for turning on/off banTamP xL’s Bluetooth function.

5. Gain Knob: adjust the Gain.

6. Tone Knob: adjust the tone brightness.

7. Volume Knob: adjust the volume.

8. Power/Bluetooth indicator: turn on banTamP xlL, the indicator becomes red, then turn on Bluetooth switch, the indicator changes from red to blue.

9. Power Switch: turm on/off banTamP xL.
   Rear panel

10. Bluetooth Antenna

11. .Power Interface: connects to DC 18V/2.0A power adapter for power supply, make sure to use the attached power adapter

12. Speaker Output: please connect with speaker impedance that is 8 or more than 82! Important notes: when connected with speaker impedance that is more than 8 2, banTamP xlL’s power will be reduced.

13. Channel-switching Footswitch pedal’s Jack

14. Headphone Output: the amp becomes mute when it connects to headphones.

15. FX LOOP: connects effect pedal input to banTamPxL’s SEND Jack, and connects effect pedal output to ban TamP xlL’s RETURN Jack.

Connection

Bluetooth connection
Turn on the Bluetooth slide switch. 2Its power indicator changes from red to blue. 3Switch on the Bluetooth of your equipment, wait for it to locate banTamP xL. Please note that the names located a re according to different models you have bought, the names are on the upper side of ban TamP xL s input jack as shown in the picture, for example, “JACKMAN II” . 4 Click the related device and match.

Cabinet impedance matching
The matched speaker impedance is 82, of course, 16 works too, but ban TamP xL achieves maximum power output only when speaker impedance is 82. While with 162, banTamP xL spower reduces.

Specifications

• Power adapter: INPUT AC 100-240V 50/60Hz OUTPUT DC18V/2.0A
• Rated power:20W/89
• Speaker Impedance:8
• Bluetooth version:4.0
• Headphone impedane: Standard 32 Minimum169
• Dimension: 163mmX 110mmX 140mm
• Weight:1300g
• Package content:
• banTamP xL xl
• Power adapter x1
• Owner’s manual xl
• Power cablex1
• Channel-switching Footswitch Connecting Cablex1
• Channel-switching Footswitch pedal x1
• Speaker cable x1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>