Tyjin Electronics C-093 Fast Wireless Charger User Guide
- June 5, 2024
- Tyjin Electronics
Table of Contents
Tyjin Electronics C-093
Fast Wireless Charger
User Guide
COMPATIBILITY: iPhone® X, iPhone® XS iPhone® XS Max, iPhone® XR, iPhone® 8
Plus, iPhone® 8 Samsung Galaxy S10®, Galaxy S10+® Galaxy S10e®, Galaxy S9®, &
Note 8
INPUT: 5V2A, 9V1.67A OUTPUT: 5W/7.5W/10W
FOR MAX CHARGING SPEED USE Quick Charge adapter
WILL ONLY CHARGE THROUGH CASES 5MM THICK OR LESS
NORMAL & FAST WIRELESS CHARGING
PLEASE MAKE SURE TO USE A WALL ADAPTER OR USB PORT THAT IS 1A – 2.4A
2.4A CHARGERS WILL ENABLE A FAST CHARGE FUNCTION. DO NOT USE ANY USB PORTS
BELOW 1A
(EX: COMPUTERS OR USB PORTS THAT ARE BELOW 1A.)
TROUBLESHOOTING
IF YOU HAVE PROBLEMS WITH WIRELESS CHARGING MAKE SURE YOUR PHONE IS CENTERED
ON CHARGER.
GET TO KNOW YOUR CHARGER
- DOUBLE COIL QI SINGLE CHARGE
- INDUCTIVE CHARGING
- CHARGING INDICATOR LED
- DESIGNED FOR QI COMPLIANCE
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>