MAESTRO HRN-RR-HD2 Plug and Play T-Harness Compatible with Newer Harley Davidson Motorcycles rHD2 Installation Guide

SELECT VEHICLE
PRINT PAGES NEEDED

INSTALL GUIDE
2014-2020
HARLEY-DAVIDSON ELECTRA GLIDE
RETAINS HANDLE BAR CONTROLS

HOW TO USE THIS INSTALL GUIDE

1. Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle.
2. Print only the pages for your vehicle using the advanced options in the Print menu.
3. Install your Maestro RR according to the guide for your vehicle.

WARNING
Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation.

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

PRODUCTS REQUIRED
iDatalink Maestro RR or RR2 Radio Replacement Interface
iDatalink Maestro HD2 Installation Harness
Non-iDatalink Compatible Radio

PROGRAMMED FIRMWARE
ADS-RR(SR)-HD02-AS

ADDITIONAL RESOURCES
Maestro RR2 Programmable Outputs Guide

OPTIONAL ACCESSORIES
ACC-RR-WPB
ACC-ABP-HD2
ACC-USB-HD2

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

WELCOME
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct firmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

INSTALLATION INSTRUCTIONS

STEP 1

• Unbox the aftermarket radio and locate its main harness.
• Remove the factory radio.
• Cut and remove the RCA junction connectors. Connect every wire from the aftermarket radio main harness to the HD2 T-harness and match the wire functions.

STEP 2

• Connect the HD2 T-harness to the vehicle.

STEP 3

• Plug the aftermarket radio harnesses into the aftermarket radio.
• Connect the steering wheel control cable to the aftermarket radio.

STEP 4

• Connect all the harnesses to the Maestro RR module then test your installation.

NOTE: Because the vehicle is not equipped with illumination or reverse gear signals, these outputs can be triggered manually by configuring them as steering wheel control commands during the flashing process in Weblink.

WIRING DIAGRAM

TROUBLESHOOTING TABLE

to the speaker outputs of the radio.
When a button on the handlebar is pressed, the light on the Maestro module blinks but the radio does not respond.| Ensure the blue 4-pin steering wheel control cable is connected between the
maestro and the radio (the radio will use either the 3.5mm jack or the Blue/Yellow wire, not both).
Refer to radio’s owners manual to verifi e if the radio has this function:
Steering Wheel Control (ON/OFF) : choose ON. or
Steering Wheel Control (Custom/Preset): choose Preset
The light on the Maestro is fl ashing RED ONCE.| There is no firmware on the module; fl ash the RR module.

MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will flash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.

TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/

IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest firmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.

Sw | Ar | Ar | SWUHD
QUICK START GUIDE

FOLLOW THE WEB PROGRAMMING
STEPS INSIDE PRIOR TO INSTALLATION.

WEB PROGRAMMING

1. INSTALL THE WEBLINK DESKTOP APPLICATION
   Go to www.idatalinkmaestro.com/plugin, select your software version (Mac or PC) and follow the installation steps. Be sure to review the system requirements before installing.

2. REGISTER A WEBLINK ACCOUNT
   Once installed, complete the Weblink registration process and lag into Weblink.

3. CONNECT THE MODULE TO YOUR COMPUTER
   Use the included USB cable to connect your iDatalink Maestro module to your computer.

4. WEBLINK PROGRAMMING
   Follow the programming steps until your module is flashed, then download your install guide and owner’s manual if applicable.

5. COMPLETE VEHICLE”SPECIFIC INSTALLATION
   Follow the steps in your install guide and complete the installation. ADS recommends having your iOatalink Maestro device installed by a certified technician. Additional accessories may be required and sold separately.

LIMITED 1-YEAR WARRANTY

Automotive Data Solutions Inc. r·ADS .. I warrant to the original purchaser of the product that the following com­ ponents product shall be free of defects in material and workmanship under normal use and circumstances for the period of one 111 year from the date  of original installation.
.. Authorized Dealer”· is defined by ADS as a company who qualifies to purchase products directly from ADS, or one of its approved distributors. Thus, products not sold nor installed by an Authorized Dealer are not covered by this warranty. This includes, but is not limited to, ADS products sold on Amazon.com, eBay.com, Walmart.com, and Newe­ gg.com. To find an authorized retailer near you, visit http://maestro.idatalink.com/find-product.
In the event of any product malfunction during the Warranty period, the original purchaser must return to the Autho­ rized Dealer where it was originally purchased with the original proof of purchase. If a malfunction is detected, the Authorized Dealer will elect to repair or replace the product at its discretion. Labor costs may be applicable and are at the discretion of the Authorized Dealer.
ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages. incidental damages, damages for loss of time, loss of earnings, commercial loss, loss of economic opportunity, and the like that may or may not have resulted from the installation or operation of an iDatalink Maestro product.

TECHNICAL SUPPORT
877.212.6169
idatalinkmaestro.com 

NEED HELP?
1 866 427-2999
[email protected]
maestro.idatalink.com/support www.12voltdata.com/forum

Automotive Data Solutions Inc. © 2021
ADS-RR(SR)-HD02-AS-IG-EN
maestro.idatalink.com

References

• GG游戏-GG TECHNOLOGES
• iDatalink Maestro
• kmaestro.com
• iDatalink Maestro
• iDatalink Maestro
• iDatalink Maestro
• Walmart | Save Money. Live better.
• Index page
• Weblink Desktop

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>