EZVIZ C3A 2MP Rechargeable WiFi Camera User Guide

: June 5, 2024
: ezviz

Table of Contents

Box Contents
Product Overview
- Camera
- Base Station
Setup
Camera Installation
Regulatory Information
Documents / Resources

EZVIZ C3A 2MP Rechargeable WiFi Camera

Box Contents

The number of the products above is subject to the actual ones you selected.

For detailed information, please refer to www.ezvizlife.com.

Product Overview

Camera

Name	Description
SYNC Button	Hold for 5 seconds to get the camera ready for Wi-Fi

configuration.
PIR| With the PIR (Passive Infrared), the device can detect a human body to determine when there is a possible break in and begins to record footage.
LED Indicator|

Solid Red: Camera is starting up.
Solid Blue: Video is being viewed in the EZVIZ app.
Slow-Flashing Blue: Camera is working.
Slow-Flashing Red: Camera is charging/Network exception.
Fast-Flashing Blue: Camera is ready for Wi-Fi configuration.
Fast-Flashing Red: Exception/Low battery.

Photoresistor| Detects the environment’s light conditions to activate the Day/Night switch function.
SD Card|

Recommended compatibility: Class 10, Max.128GB.
Format the card in the EZVIZ app before using it.

Power Interface| For charging the battery or powering up the camera.

Base Station

Name	Description
LED Indicator

Solid Green: The system works properly.
Solid Blue: Device is not connected to internet.
Flashing Blue: Device starting synchronization with the camera.
Off: The base station is turned off.

Main Button| Press to start synchronization with the camera (The synchronization lasts 2 mins).
Power Button| Press to connect or cut off power.
Network Indicator|

Solid Green: The network cable is connected.
Flashing Green: Data transmission is working.
Off: The network cable is disconnected.

Reset Button| Hold for 7 seconds to to restart and reset all parameters to default.

Setup

Step 1 Insert Battery into Camera
– Press the button as shown below to open battery cover.
– Insert the battery.
– Close the battery cover

Please fully charge the battery before the first time use.

Step 2 Charge the Battery
– Connect the camera with power outlet via power adapter (5V 1A).

Use the exclusive charger to charge the battery.

Step 3 Power on the Base Station
– Wait until the LED indicator turns to solid blue.

Step 4 Connect Base Station to Internet via Network Cable
– Connect the base station to the LAN interface of your router with the network cable.

Make sure network indicator is on or flashing.

Step 5 Synchronize Base Station with Camera(s)

|

Make sure the camera is within 2′ to 3′ (0.6 m to 1 m) of the base station.
The synchronization process lasts about 2 minutes.

---|---

Press the Main Button on the base station. The circular LED indicator flashes Blue.
Press and hold the Sync button on the camera for 5 seconds. The LED indicator will slowly flash blue. When flashing blue becomes more rapid and then stops, sync is confirmed.

You can sync up to 6 cameras to each base station at the same time.

Step 6 Add the Base Station to Your EZVIZ Account

Create an user account.
– Connect your mobile device to the Internet.
– Search “EZVIZ” in App Store or Google PlayTM to download.
– Launch the App and register an EZVIZ user account.
Add Base Station to EZVIZ.
– Log in the EZVIZ App.
– At the Home screen, tap “+” on the upper-right corner to go to the scanning QR code interface.

– Scan the QR Code on base station or manually enter the Serial Number to add
base station.

– Tap the “Add” button to finish setup. This will take approximately 1 minute.
– Tap “View Camera” to start using and viewing your camera(s) in the mobile app.

Camera Installation

|

Camera and base station should be within the distance of up to 300 feet (100 m). Stay away from wireless device or barriers to avoid decreasing the communication distance.
Your camera provides a 126-degree viewing angel. Position your cameras to make sure the scene you want to video is in the cameras’ field of view.
Your camera motion sensor is far more sensitive to side-to-side movement across their field of view. The best area for motion detection is 5 feet to 25 feet (1.5 to 7.5 meters) from the camera position.

---|---

Step 1 Pick a clean and flat surface, indoors or outdoors.

Step 2 Secure the magnetic mount with the screw.

Step 3 Mount the camera to the magnetic mount or attach it directly to a magnetic surface.

LIMITED WARRANTY
Thank you for purchasing EZVIZ products. This limited warranty gives you, the original purchaser of the EZVIZ product, specific legal rights. You may also have other legal rights that vary by state, province or jurisdiction.
The disclaimers, exclusions, and limitations of liability under this limited warranty will not apply to the extent prohibited by applicable law. No distributor, reseller, agent, or employee is authorized to make any medication, extension, or addition to this limited warranty.
Your EZVIZ product is warranted for a period of two (2) years from the date of purchase against defects in materials and workmanship, or such longer period as may be required by law in the country or state where this product is sold, when used normally in accordance with user manual.
You can request warranty service by emailing us at support.eu@ezvizlife.com.
For any defective EZVIZ products under warranty, HANGZHOU EZVIZ SOFTWARE CO.,LTD. (“the Company”) will, at its option, (i) repair or replace your product free of charge; (ii) exchange your product with a functional equivalent product; (iii) or refund the original purchase price, provided you provide the original purchase receipt or copy, brief explanation of the defect, and return the product in its original packaging. At the sole discretion of the Company, repair or replacement may be made with a new or refurbished product or components. This warranty does not cover the postal cost, insurance and any other incidental charges incurred by you in returning the product.
Except where prohibited by applicable law, this is your sole and exclusive remedy for breach of this limited warranty. Any product that has either been repaired or replaced under this limited warranty will be covered by the terms of this limited warranty for the longer of ninety (90) days from the date of delivery or the remaining original warranty period.
This warranty does not apply and is void:

If the warranty claim is made outside the warranty period or if the proof of purchase is not provided.
For any malfunction, defect or failure caused by or resulting from the evidence of impact, mishandling ,tampering, use contrary to the applicable instruction manual, incorrect power line voltage, accident, loss, theft, fire, flood or other Acts of God, shipping damage or damage resulting from repairs performed by unauthorized personnel.
For any consumable parts, such as batteries, where the malfunction is due to the normal aging of the product.
Cosmetic damage, including but not limited to scratches, dents and broken plastic on ports.
Any software, even if packaged or sold with EZVIZ hardware.
For any other damages free from defects in material or workmanship.
Routine cleaning, normal cosmetic and mechanical wear and tear.

About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the ™ website (http://www.ezvizlife.com).

Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou EZVIZ Software Co.,Ltd . or its subsidiaries (hereinafter referred to be “EZVIZ”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not make any warranties, guarantees or representations, express or implied, regarding to the Manual.

Trademarks Acknowledgement
™, and other EZVIZ’s trademarks and logos are the properties of EZVIZ in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners.

Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ’S TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE PURCHASE PRICE THE PRODUCT.
EZVIZ does not undertake any liability for personal injury or property damage, as the result of product interruption or service termination cause by:
a) improper installation or usage other than as requested;
b) the protection of national or public interests;
c) Force Majeure;
d) yourself or the third party, including not limitation, using any third party’s products, software, applications, and among others.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
The purpose of the Products is to provide an adequate warning in the event of illegal encroachment in certain area; however, the proper installation of the Products will not eliminate, but only reduce, that accidents will not occur or that there will be no personal injury or property loss as a result. You are highly recommended to raise your vigilance and strengthen the safety awareness in the daily life.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. YOU FUTHER AGREE THAT THIS PRODUCT IS ONLY FOR CIVIL USE, AND EZVIZ SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES, SUCH AS THIRD PARTY RIGHTS INFRINGEMENT, MEDICAL TREATMENT, SAFETY EQUIPMENT OR OTHER SITUATIONS WHERE THE PRODUCT FAILURE COULD LEAD TO DEATH OR PERSONAL INJURY, OR WEAPON OF MASS DESTRUCTION, CHEMINCAL AND BIOLOGICAL WEAPON, NUCLEAR EXPLOSION, AND ANY UNSAFE NUCLEAR ENERGY USES OR ANTI-HUMANITY USAGES. YOU SHOULD UNDERTAKE ALL RESPONSIBILITIES FOR LOSSES OR DAMAGES RESULTING FROM THE ABOVE USAGES WHATSOEVER.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATER PREVAILS.

Regulatory Information

FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

| EU Conformity Statement
This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the Radio Equipment Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
---|---
| 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info.
| 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info.

EC DECLARATION OF CONFORMITY
Hereby, Hangzhou EZVIZ Software Co.,Ltd . declares that the radio equipment type [CS-W2D] is in compliance with Directive 2014/53/EU.
The full text of the EC DECLARATION OF CONFORMITY is available at the following web link: http://www.ezvizlife.com/declaration-of-conformity.

Safety Instruction
Due to the product shape and dimension, the name and address of the importer/manufacturer are printed on the package.

SAVE THIS MANUAL FOR FUTURE REFERENCE