intelbras IVP 1000 Pet Passive infrared motion sensor User Manual

intelbras IVP 1000 Pet Passive infrared motion sensor

IVP 1000 Pet SF Wireless passive infrared motion sensor
Congratulations, you have just purchased a product with Intelbras quality and safety. The IVP 1000 Pet SF motion sensor features passive infrared ray detection technology, with advanced signal analysis technology that prevents accidental triggering.

Care and safety

• This product is intended for INDOOR environments.
• The Pet function is intended for crawling animals weighing up to 20 kg. If the animal is on top of a bench, for example, the Pet function can be canceled.
• Do not use the sensor in areas with sudden changes in temperature such as air conditioners and heaters, fans, refrigerators, and ovens. Do not expose the sensor directly or to sunlight reflections.
• Avoid touching the surface of the PIR, if necessary, use a soft cloth for cleaning.
• Do not place objects in front of the sensor. To secure the detection area, avoid curtains, screens, or any object that blocks the scan.
• Wireless communication technology, when exposed to environments with high power radiation, can suffer interference and have its performance impaired. Example: locations near TV towers, AM/FM radio stations, ham radio stations, routers, etc.
• The sensor must be installed where a possible intruder is easily detected, that is, where there is a movement across the sensor’s detection beams.
• The recommended installation height is between 2.0 and 2.40 meters. If the sensor is installed at a different height than specified, its detection and Pet function may be impaired in order to nullify the Pet immunity.
• LGPD – General Personal Data Protection Law: Intelbras does not access, transfer, capture or perform any other type of processing of personal data from this product.

Scan (top view)

Detection range (side view)

Technical specifications

Characteristics

• Micro-controlled signal processing;
• Automatic temperature compensation to reduce false alarms;
• White light immunity of up to 10,000 lux;
• High RFI/EMI immunity;
• Passive infrared with the dual element;
• Adjustable infrared (PIR) sensitivity;
• Immunity to crawling animals weighing less than 20 kg;
• Power: LITHIUM 3 Vdc battery – CR123A;
• Battery level sensor.

Product

1. Cabinet;
2. Fresnel lens;
3. PROG button;
4. Sensitivity selector switch;
5. red LED;
6. Pyro sensor;
7. Battery;
8. Antenna.

Installation

The sensor must be installed on a flat, fixed, flicker-free surface with a height between 2.0 and 2.4 meters. It is recommended to install the sensor parallel to the wall for the greatest detection range. If the sensor is installed tilted or with the use of an articulator, its detection range and Pet function may be impaired in order to nullify the function.

To install the sensor, follow the procedure below:

• Open the sensor front cover using a screwdriver or similar tool.

• Insert the battery observing the polarity indicated on the product plate. The LED will blink for a few seconds (stabilization time), when it goes off, the sensor will already be in normal operation.
  Note: do not register the sensor in the center during the stabilization time, wait for it to start working.

• To register the sensor code in the alarm control panel, check the procedure in the manual of the used alarm control panel and trigger a trip or press the PROG button located on the sensor board.

• Install it in the location to be protected using the screw locations as shown in the following figures:

• Close the case by snapping on the top of the front cover first and descending perpendicularly towards the bottom of the sensor.

Important:
the IVP 1000 Pet SF was designed for indoor and closed areas and with the presence of animals of up to 20 kg, so do not use it for protection of outdoor or open areas and with the presence of animals of more than 20 kg.

Sensitivity setting

The sensor has a selector switch for sensitivity adjustment, where it is possible to adjust between the 3 detection levels.

• 1P: maximum sensitivity for motion detection;
• 2P: medium sensitivity (factory default);
• 3P: minimum sensitivity for greater robustness against accidental shots.

Operation

When energizing the sensor, it runs in test mode for 15 minutes so that all sensor positioning adjustments can be made. During this period, at any motion detection the LED lights up and a trigger is generated. After the test mode, the sensor goes into economic operating mode, so that when it detects movement it turns on the LED, triggers, and goes into hibernation, remaining for a period that can last from 30 seconds (environment with little movement) up to 2 minutes (environment with a lot of movement). During this sleep period, the LED is not activated and no new triggers are generated, as a notification has just been sent to the control panel. After sleep time, the sensor goes back to monitoring the environment until detecting a new movement. This ability to learn from the movement of the environment means that periodic and non- continuous shots are generated in places with high movement, in turn, saving battery.

Test

Once installed and energized, walk in the area to be protected simulating a possible intrusion. Observe if the sensor is able to detect your movements during the journey, by lighting the lens. Adjust its sensitivity if necessary or reposition the sensor installation.

Low battery sensor

The IVP 1000 Pet SF sensor controls the battery level and if it is critical (equal to or below 2.5V) it sends the information to the control panel during triggering. In addition, the sensor also signals through the LED, after each activation of the sensor the LED lights up (as usual) and then flashes indicating low battery. Use only quality batteries with the correct sizing for the device, and with typical use of the device, the expected battery life is 1 to 2 years, which may be influenced by the number of activations, weather conditions and mode of settings. The battery model must be CR123A 3V, using one (1) battery per sensor.

Battery replacement

To replace the product’s battery:

• Remove the dead battery;
• Press the PROG button or wait a few seconds for the circuit to completely discharge;
• Connect new battery.

Homologation

This equipment is not entitled to protection against harmful interference and may not cause interference in properly authorized systems. This is a product approved by Anatel, the approval number can be found on the product label, for queries go to the website: sistemas.anatel.gov.br/sch.

Warranty term

It is established that this warranty is granted upon the following conditions:

• Client’s name:
• Client’s signature:
• Invoice number:
• Date of purchase:
• Model:
• Retailer:
• Serial number:

1. All the parts, pieces, and components of the product are guaranteed against possible manufacturing defects, which may arise, for the term of 1 (one) year – this being 90 (ninety) days of legal warranty and 9 (nine) months of contractual warranty –, counting from the date of purchase of the product by the Consumer, as appears in the product purchase bill of sale, which is an integral part of this Term throughout the domestic territory. This contractual warranty includes the free exchange of parts, pieces, and components which have a manufacturing defect, including the expenses with labor used in this repair. If there is no manufacturing defect, but defect(s) arising from misuse, the Consumer shall bear these expenses.
2. The installation of the product shall be executed in accordance with the Product Manual and/or Installation Guide. If your product requires the installation and configuration by a qualified technician, seek a suitable specialized professional, the costs of these services not being included in the product amount.
3. Having perceived the defect, the Consumer shall immediately contact the nearest Authorized Service which appears in the report offered by the manufacturer – they are the only ones authorized to examine and remedy the defect during the warranty term foreseen herein. If this is not respected, this warranty shall lose its validity, as it shall be characterized as product infringement.
4. If the Consumer requests home service, it shall contact the nearest Authorized Service to inquire about the technical visit rate. If it is necessary to remove the product, the ensuing expenses, such as those of transportation and insurance of the taking and return of the product, shall be the Consumer’s responsibility.
5. The warranty shall lose its validity totally in the occurrence of any of the following cases: a) if the defect is not one of the manufacturer, but is caused by the Consumer or by third parties foreign to the manufacturer; b) if the damage to the product arises from accidents, disasters, agents of nature (lightning, floods, landslides, etc.), humidity, the voltage in the electrical network (excess voltage caused by accidents or excessive fluctuations in the network), installation/use in disagreement with the user’s manual or arising from natural wear of the parts, pieces, and components; c) if the product has undergone effects of a chemical, electromagnetic, electrical or animal (insects, etc.) nature; d) if the serial number of the product has been falsified or erased; e) if the appliance has been infringed.
6. This warranty does not cover loss of data; therefore, it is advisable that if it is the case of the product, the Consumer makes a backup regularly of the data which appears in the product.
7. Intelbras is not responsible for the installation of this product, or for possible attempts at fraud and/or sabotage in its products. Maintain the updates of the software and applications used up-to-date, if it is the case, as well as the network protection required for defense against hackers. The equipment is guaranteed against defects in its usual conditions of use, it is important to bear in mind that, as it is electronic equipment, it Is not free of fraud and scams which may interfere with its correct functioning.
8. After its useful life, the product must be delivered to an authorized Intelbras service center or directly disposed of in an environmentally appropriate manner to avoid environmental and health impacts. If you prefer, the battery, as well as other unused Intelbras brand electronics, can be disposed of at any Green Electron collection point (waste management facility with which we are associated). If you have any questions about the reverse logistics process, please contact us at (48) 2106-0006 or 0800 704 2767 (Monday to Friday 8 am to 8 pm and Saturdays 8 am to 6 pm) or via -mail support@intelbras.com.br.

These being the conditions of this complementary Warranty Term, Intelbras S/A reserves the right to alter the general, technical and esthetic features of its products without prior notice. The manufacturing process of this product is not covered by the requirements of ISO 14001. All the images in this manual are illustrative. Product benefiting from the Legislation of Informatics.

• Customer Support: (48) 2106 0006
• Forum: forum.intelbras.com.br
• Support via chat: chat.intelbras.com.br
• Support via e-mail: suporte@intelbras.com.br
• Customer Service: 0800 7042767
• Where to buy it? Who installs it? 0800 7245115

Produced by: Intelbras S/A – Indústria de Telecomunicação Eletrônica Brasileira Rodovia BR 459, km 124, 1325 – Distrito Industrial – Santa Rita do Sapucaí/MG – 37540-000 CNPJ 82.901.000/0016-03 – www.intelbras.com.br | www.intelbras.com

References

• Fórum Intelbras - Índice
• Entrar em internet
• intelbras.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>