STAGES CYCLING 000-2534 Gen 3 Power Meter Instructions

: June 5, 2024
: STAGES CYCLING

Table of Contents

Important product information
Battery warnings and device care
Warranty
FCC Compliance Statement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

STAGES CYCLING 000-2534 Gen 3 Power Meter Instructions

Important product information

Manufacturer Information:
Foundation Fitness, LLC
www.stagescycling.com
[email protected]
Customer Support: 606 SE 9th Ave,
Portland, OR 97214 1-800-778-7218
Product Name:
Stages Power® Meter, Left /
Stages Power® Meter, Right
Model Name: SPM2A / SPM2B
FCC ID: ZBM-SPM2,
IC: 9327A-SPM2
CE registration

All warnings and cautions indicated by this icon ⚠ below must be followed and understood before using this product. Failure to following warnings may result in injury to persons or property, with potential for events resulting in death.

Battery warnings and device care

WARNING: This product contains a lithium button/coin cell battery. The battery can cause severe or fatal injuries in 2 hours or less if swallowed or placed inside any part of the body.
If you suspect the battery has been swallowed or placed inside any part of the body, seek immediate medical attention.

The below guidelines must be followed in order to maintain expected useful life of the device, and to reduce risk of damage to device or personal injury.

Keep device clean and dry when stored and not in-use.
No internal items are serviceable and no attempt should be made to adjust or alter any internal items.
Do not expose device to high heat environments over the recommend temperatures, which includes leaving the device in an unattended vehicle in direct sunlight.
Never expose this device or battery to open flames, incineration, sharp or piercing objects, chemicals, or the battery to water.
Never expose battery to children, or allow them to chew or swallow any portion as chemical burns, injury, or death may result.
Regularly examine devices and make sure the battery compartment is correctly secured, e.g. that the screw or other mechanical fastener is tightened. Do not use if compartment is not secure.
Dispose of used button batteries immediately and safely out of the reach of children. A battery can still be dangerous even when it can no longer operate the device.

Recycling/Disposal of device and battery Warning: This device includes a lithium battery. This device must not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product to designated collection points where it will be accepted free of charge.
In compliance with your local laws and regulations, please contact local authorities for end of life disposal of this product and battery. WEEE and other compliance information is available, see Stages Cycling® help site for further information.

Health Warning:
Before beginning exercise or modifying any exercise program, consult your physician.

Environmental:
California Proposition 65: The enclosed hardware and its packaging contain chemicals the State of California has found to cause cancer, birth defects or reproductive harm.

Warranty

(1) One year limited warranty. In all cases a Return Authorization Number (RA#) must be issued by Stages Cycling before any product is returned for warranty inspection and service

HOW CONSUMER LAW RELATES TO THIS WARRANTY
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE). OTHER THAN AS PERMITTED BY
LAW, STAGES CYCLING DOES NOT EXCLUDE, LIMIT OR SUSPEND OTHER RIGHTS YOU MAY HAVE. FOR A FULL UNDERSTANDING OF YOUR RIGHTS YOU SHOULD CONSULT THE LAWS OF YOUR COUNTRY, PROVINCE OR STATE.

WARRANTY LIMITATIONS THAT MAY AFFECT CONSUMER LAW

TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL,
WRITTEN, STATUTORY, EXPRESS OR IMPLIED. STAGES CYCLING DISCLAIMS ALL STATUTORY AND IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS, TO THE EXTENT PERMITTED BY LAW. IN SO FAR AS SUCH WARRANTIES CANNOT BE DISCLAIMED, STAGES CYCLING LIMITS THE DURATION AND REMEDIES OF SUCH WARRANTIES TO THE DURATION OF THIS EXPRESS WARRANTY AND, AT STAGES CYCLING’S OPTION, THE REPAIR OR REPLACEMENT SERVICES DESCRIBED BELOW. IN NO EVENT WILL THE VALUE OF THE WARRANTY PROVIDED EXCEED THE ORIGINAL PURCHASE PRICE. SOME STATES (COUNTRIES AND
PROVINCES) DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY (OR CONDITION) MAY LAST, SO THE LIMITATION DESCRIBED ABOVE MAY NOT APPLY TO YOU

WHAT IS COVERED BY THIS WARRANTY?

Stages Cycling warrants the Stages Cycling-branded hardware product and accessories contained in the original packaging (“Stages Cycling Product”) against defects in materials and workmanship when used normally in accordance with Stages Cycling’s published guidelines for a period of ONE (1) YEAR from the date of original retail purchase by the end-user purchaser (“Warranty Period”). This warranty only applies to the original owner and is not transferable.

WHAT IS NOT COVERED BY THIS WARRANTY?

This warranty applies to Stages Cycling branded products including but not limited to crank arms when packaged or sold with Stages Cycling hardware. Manufacturers, suppliers, or publishers, other than Stages Cycling, may provide their own warranties to you but Stages Cycling, in so far as permitted by law, provides their products “AS IS”. Stages Cycling does not warrant that the operation of the Stages Cycling Product will be uninterrupted or error- free. Stages Cycling is not responsible for damage arising from failure to follow instructions relating to the Stages Cycling Product’s use. Stages Cycling’s published guidelines include but are not limited to information contained in technical specifications, user manuals and service communications

This warranty does not apply: (a) to consumable parts, such as batteries or protective coatings that are designed to diminish over time, unless failure has occurred due to a defect in materials or workmanship; (b) to cosmetic damage, including but not limited to scratches and dents; (c) to damage caused by use with another product; (d) to damage caused by accident, impact, abuse, misuse, fire, earthquake or other external cause; (e) to damage caused by operating the Stages Cycling Product outside Stages Cycling’s published guidelines; (f) to damage caused by service, modification or alterations performed by anyone other than Stages Cycling or an authorized Stages Cycling Service Provider (h) to defects caused by normal wear and tear or otherwise due to the normal aging of the Stages Cycling Product, or (i) if any serial number has been removed or defaced from the Stages Cycling Product.

IMPORTANT RESTRICTION

Stages Cycling may restrict warranty service to the country where Stages Cycling or its Authorized Distributors originally sold the Stages Cycling Product.
Australian Consumer Law: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Consumers in Australia should contact Stages Cycling ([email protected]) or their point of purchase to obtain a return authorization number (RA#). Products deemed defective that are within the warranty period will be repaired or replaced. A regional distributor operating on Stages Cycling’s behalf will handle service and replacement for Stages products purchased within their market. Associated costs (if any) and reimbursement for warranty service will be determined when issuing the RA#.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation. Changes or modification to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Caution:

To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to a computer or peripheral devices).

FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment.

ISED Compliance Statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

CAN ICES-3 (B)/NMB-3(B)
Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits established for an uncontrolled environment. This equipment should be installed and used with a minimum distance of 0.5 cm between the source of radiation and your body.

CE Compliance Statement:

Europe – EU Declaration of Conformity. Hereby, Stages Cycling LLC declares that the radio equipment type Stages Power Meter, Left Model: SPM2A / SPM2B is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.stagescycling.com/en_us/compliance or contact Stages Cycling for a copy. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the RED 2014/53/EU:

EN300328 2.1.1 (2016-11) EN301489-1 V2.2.0 (2017-03)
EN301489-17 V3.2.0 (2017-03) EN60950-1:2006+A11:2009 +A1:2010+A12:2011+A2:2013
EN 62479 (2010) EU EMC – DIRECTIVE 2014/30/EU: EN55032(2015)/EN55024(2010)

This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries. Hereby, Stages Cycling declares that these products are in compliance with the essential requirements and other relevant provisions of RED 2014/53/EU. European Union Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronics Equipment, commonly known as RoHS 2.